IKEA ÖVERSIDAN 005.246.83 LED Light instructions manual

The IKEA ÖVERSIDAN 005.246.83 is a modern LED light fixture designed for ambient or task lighting. It features energy-efficient LED technology, a sleek design suitable for various rooms, and includes mounting hardware for installation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LED light panel, mounting bracket, power adapter/cable, wall anchors/screws.

Feature	Description
LED Light Source	Energy-efficient, long-lasting LED illumination
Mounting Bracket	For secure wall or ceiling installation
Power Adapter	Converts AC power for LED operation
On/Off Switch	Integrated or remote power control
Design	Slim, modern profile for discreet placement
Brightness	Fixed or adjustable output (model dependent)

Installation

Unpack and inspect all parts. Choose a suitable location.

Turn off power at circuit breaker for the installation area.
Mark mounting points using the bracket as a template.
Drill holes and insert wall anchors if needed.
Secure the mounting bracket to the wall/ceiling with provided screws.
Attach the LED light fixture to the bracket as instructed.
Connect the power adapter to the fixture and plug into a wall outlet.

WARNING! Ensure power is off before installation to prevent electric shock. Use appropriate tools and fasteners for your wall type.

First-Time Setup

After installation, restore power and test the light.

Turn on power at the circuit breaker.
Use the switch (on fixture, wall, or remote) to turn on the light.
Verify the LED illuminates evenly with no flickering.
Adjust the angle/direction if the fixture allows.

CAUTION! Do not look directly at the LED light source at close range. Ensure the fixture is securely mounted and does not feel loose.

Specifications

Model: ÖVERSIDAN 005.246.83
Light Source: Integrated LED
Power Consumption: [e.g., 10W] (Refer to product label)
Input Voltage: 100-240V AC, 50/60Hz
Color Temperature: [e.g., 3000K Warm White]
Luminous Flux: [e.g., 800 lumens]
Dimensions: Refer to product packaging
Weight: Lightweight design
Expected Lifespan: Up to 25,000 hours

Controls and Settings

Operation is typically simple with an on/off function.

Primary Control: Physical switch on the fixture, wall switch, or remote control (if included).

Features: Fixed brightness is standard. Some models may include dimming capability via a compatible wall dimmer (check specifications - not all LEDs are dimmable).

Note: This fixture is designed for indoor use only. Do not use with external dimmers unless specified as compatible.

Connecting to Power

Power is supplied via a plug-in adapter or direct wiring (model dependent).

For plug-in models: Ensure the outlet is easily accessible and not overloaded.
For hardwired models: Connection must be performed by a qualified electrician in accordance with local codes.
Route the power cable neatly to avoid tripping hazards or pinching.

Tip: Use a surge protector for added safety if plugging into a wall outlet.

Operation

Daily use is straightforward.

To turn ON: Press the switch or use the remote control.
To turn OFF: Press the switch again.
For dimmable models: Adjust the dimmer switch slowly to desired brightness.

WARNING! Do not operate the light if the cover/diffuser is damaged or removed. Allow the fixture to cool before handling after extended use.

Care & Cleaning

Turn off and disconnect power before cleaning.

Use a dry, soft cloth to wipe the exterior surface.
For more stubborn dirt, use a slightly damp cloth. Do not allow moisture to enter any openings.
Never use abrasive cleaners, solvents, or sprays directly on the fixture.

CAUTION! Do not immerse the light fixture or power adapter in water. The LED module is not user-serviceable; do not attempt to open it.

Regulatory Information

This product complies with applicable safety and electromagnetic compatibility (EMC) regulations. The LED light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Dispose of the product and any electronic waste according to local regulations. For IKEA warranty and support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	No power	Check if the wall switch is on. Ensure the power adapter is plugged in securely. Check the circuit breaker/fuse.
Light flickers	Loose connection / incompatible dimmer	Check all wire connections (if hardwired). If using a dimmer, ensure it is compatible with LED loads.
Dim output or dark spots	End of life / fault	LED may be near its end of life. Contact IKEA support if under warranty.
Remote not working (if applicable)	Batteries / obstacles	Replace remote batteries. Ensure you are pointing the remote at the fixture's sensor and no objects are blocking the signal.
Buzzing sound from dimmer	Incompatible dimmer	This fixture may not be designed for dimming, or the dimmer is not LED-compatible. Replace with a standard switch or a certified LED dimmer.

Reset: For smart/wireless models, refer to separate connectivity guide for reset procedures.

Service: For product support, contact IKEA customer service at your local store or visit www.ikea.com.