IKEA ÖRFJÄLL 104.417.72 Chair instructions manual

The IKEA ÖRFJÄLL 104.417.72 is a versatile swivel chair with adjustable height, featuring a sturdy metal base, smooth-rolling casters, and a comfortable padded seat and backrest. Designed for home office or study use, it offers ergonomic support and easy mobility. Below are key sections for safety, assembly, adjustment, care, and troubleshooting.

1. Parts & Tools Included 2. Safety Information 3. Assembly Instructions 4. Adjusting Your Chair 5. Care & Maintenance 6. Weight & Dimensions 7. Warranty Information 8. Troubleshooting

Parts & Tools Included

Before assembly, check that you have all parts listed below. The required Allen key is included in the package.

Part NameQuantityDescription
Seat with armrests1Padded seat unit with attached armrests
Backrest1Padded backrest with mounting bracket
Gas lift cylinder1Height adjustment mechanism
Star base15-legged metal base
Casters (Wheels)5Swivel wheels for easy movement
Screws & Bolts1 setAll necessary fasteners
Allen key1Tool for assembly
Instruction manual1This document

Safety Information

Read all instructions before assembly and use.

  1. Weight Limit: Do not exceed the maximum load of 110 kg (243 lbs).
  2. Stability: Ensure all casters are firmly attached and the chair is on a level surface.
  3. Assembly: Tighten all screws and bolts securely. Do not use power tools—hand-tighten only.
  4. Children: This is not a toy. Do not allow children to play on or with the chair.
  5. Inspection: Periodically check that all parts are secure and undamaged.

WARNING! Improper assembly or exceeding weight limits can cause the chair to collapse, resulting in serious injury.

Assembly Instructions

Follow these steps in order. Allow approximately 20-30 minutes for assembly.

  1. Attach Casters: Push each caster firmly into the holes on the star base until they click into place.
  2. Insert Gas Lift: Place the star base upside down. Insert the gas lift cylinder into the center hole of the base.
  3. Attach Seat to Gas Lift: Turn the base right-side up. Place the seat assembly over the gas lift. Align the holes and secure with the provided large bolt using the Allen key.
  4. Attach Backrest: Position the backrest against the seat's mounting bracket. Insert and tighten the four smaller screws using the Allen key.
  5. Final Check: Ensure all connections are tight. The chair should not wobble.

Tip: Assemble the chair on a soft surface (like a carpet) to avoid scratching the parts.

Adjusting Your Chair

Your ÖRFJÄLL chair is designed for personalized comfort.

Ergonomic Tip: Adjust the height so your feet are flat on the floor and your knees are at a 90-degree angle.

Care & Maintenance

Proper care will extend the life of your chair.

  1. Fabric/Upholstery: Vacuum regularly. Clean spills immediately with a damp cloth and mild soap. Do not soak.
  2. Metal & Plastic Parts: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners.
  3. Mechanism: Keep the gas lift and casters free of dust and debris. Do not lubricate.
  4. Storage: Store in a dry place away from direct sunlight and heat sources.

CAUTION! Never use harsh chemicals, solvents, or steam cleaners on any part of the chair.

Weight & Dimensions

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the "Important Information" booklet in your package or at www.ikea.com.

Warranty Coverage: 10 years for frame and other main parts under normal home use and proper assembly.

Support: For missing parts, assembly questions, or warranty claims, contact IKEA customer service at 1-888-888-4532 or visit your local IKEA store.

Troubleshooting

SymptomPossible CauseCorrective Action
Chair wobblesLoose screws or uneven floorTighten all screws connecting seat, base, and backrest. Ensure chair is on a level surface.
Height adjustment not workingLever not engaged or mechanism blockedEnsure you are pulling the lever fully. Check for obstructions around the gas lift. Do not stand on the chair to adjust.
Casters not rolling smoothlyDirt/hair wrapped around caster axleTurn chair over and clean the caster wheels and forks. Remove any tangled fibers.
Backrest feels looseScrews attaching backrest are looseTighten the four screws connecting the backrest to the seat bracket using the Allen key.
Unusual squeaking noiseMetal parts rubbing or loose connectionIdentify the source. Tighten all connections. Noise often diminishes with use.

Replacement Parts: Visit IKEA's spare parts service online or in-store.

Disposal: At end of life, disassemble and recycle materials according to local regulations.

IKEA ÖRFJÄLL 104.417.72 Chair instructions manual © - All Rights Reserved 2025