IKEA ÅSKMULLER 605.093.64 Table Lamp instructions manual

The IKEA ÅSKMULLER 605.093.64 is a modern table lamp designed for home or office use, featuring a minimalist design, adjustable components, and energy-efficient LED technology. This manual provides essential information for safe assembly, installation, operation, and maintenance. Below are key sections covering safety, parts identification, assembly steps, operation, care, and troubleshooting.

1. Parts & Components 2. Safety Information 3. Assembly Instructions 4. Installation & Setup 5. Operation 6. Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Components

Key components included in the package: Lamp base, stem, shade, LED bulb (included), power cord with switch, and assembly hardware.

Part	Description
Lamp Base	Weighted base for stability
Stem	Adjustable or fixed stem connecting base to shade
Shade	Diffuser or cover made of fabric/plastic/glass
LED Bulb	Integrated or replaceable energy-saving bulb
Power Cord	With in-line switch or touch control
Hardware	Screws, nuts, washers for assembly
User Manual	This instruction booklet

Safety Information

Read all instructions before assembly and use.

Use only the included LED bulb or a replacement with equivalent specifications (max wattage indicated on lamp).
Ensure the lamp is placed on a stable, flat, and dry surface away from heat sources or water.
Do not operate the lamp if the cord or plug is damaged.
Unplug the lamp before cleaning, replacing the bulb, or performing any maintenance.
This lamp is for indoor use only.

WARNING! Risk of electric shock or fire if safety instructions are not followed. Keep out of reach of children.

Assembly Instructions

Follow these steps to assemble your table lamp. Estimated time: 10-15 minutes.

Unpack all parts and lay them on a clean, soft surface to avoid scratches.
Attach the stem to the base: Insert the threaded end of the stem into the base socket and tighten securely by hand (clockwise). Use the provided wrench if necessary.
Attach the shade holder/ring to the top of the stem.
Place the lampshade onto the holder. For clip-on shades, squeeze the clip and attach to the bulb holder. For screw-on shades, align and twist clockwise until snug.
Insert the LED bulb into the socket (if not pre-installed). Do not overtighten.
Route the power cord through the designated channel in the stem (if applicable).

CAUTION! Do not force parts during assembly. Ensure all connections are firm but not over-tightened.

Installation & Setup

Once assembled, set up your lamp for use.

Place the lamp on a stable table, desk, or nightstand.
Plug the power cord into a standard 120V AC wall outlet.
Turn on the lamp using the in-line switch on the cord or the touch-sensitive base (model dependent).
Adjust the shade angle or stem position for desired light direction.

Tip: Position the lamp to avoid glare on screens or reflective surfaces.

Operation

Operating your ÅSKMULLER table lamp is simple.

On/Off: Use the switch on the cord or touch the base (for touch models). Some models may feature a dimmer function—press and hold or tap repeatedly to adjust brightness.
Adjustment: Gently bend the stem or rotate the shade to direct light where needed. Do not apply excessive force.
Bulb Replacement: Ensure lamp is unplugged and cool. Unscrew the old bulb (counterclockwise) and screw in a new compatible LED bulb (max wattage as labeled).

Note: The included LED bulb is designed for long life and may not be replaceable in some integrated models.

Specifications

Model: ÅSKMULLER 605.093.64
Type: Table Lamp
Power Supply: 120V AC, 60Hz
Max Wattage: [e.g., 10W LED equivalent to 60W incandescent]
Bulb Type: Integrated or E26/E27 base LED (included)
Color Temperature: [e.g., 2700K Warm White]
Materials: Base - [e.g., Metal/Plastic]; Shade - [e.g., Fabric/Plastic]
Dimensions (approx.): Height: [e.g., 16"]; Base Diameter: [e.g., 6"]
Weight: [e.g., 2.2 lbs]
Certifications: UL Listed, Energy Star certified (if applicable)

Care & Maintenance

Proper care ensures longevity and safe operation.

Cleaning: Unplug the lamp. Wipe the base and stem with a soft, dry cloth. For fabric shades, use a vacuum with a brush attachment or a soft duster. For plastic/glass shades, wipe with a damp cloth and dry immediately.
Do Not: Use abrasive cleaners, solvents, or immerse any part in water.
Storage: If not in use, store in a cool, dry place in its original packaging if possible.

CAUTION! Never clean the lamp while it is plugged in or hot.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in; faulty outlet; switch off; bulb failure	Check plug and outlet; ensure switch is on; try a different outlet; replace bulb if applicable.
Lamp flickers	Loose bulb; incompatible bulb; faulty connection	Ensure bulb is screwed in tightly; use only recommended bulb type; check cord connections.
Lamp is unstable	Base not assembled tightly; uneven surface	Tighten the connection between base and stem; place on a flat, level surface.
Shade is loose	Not properly attached	Turn off lamp, let cool, and reattach shade according to assembly steps.
Touch control not responsive	Dirty surface; power issue	Clean the touch area with a dry cloth; unplug and plug back in.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the warranty card included in the packaging for specific terms and duration.

For customer support, replacement parts, or further assistance:

Visit: www.ikea.com
Contact IKEA Customer Service: 1-888-888-4532
Have your model number (605.093.64) and proof of purchase ready.

Recycling: Dispose of the lamp and electronic components according to local regulations. Do not dispose of with household waste.