IKEA ÅRSTID 602.806.39 Table Lamp instructions manual

The IKEA ÅRSTID 602.806.39 is a stylish and functional table lamp designed for ambient lighting. It features a durable construction, energy-efficient bulb compatibility (E14 base, max 15W), an on/off switch, and a stable base. Below are key sections for safety, assembly, operation, care, and troubleshooting.

Features at a Glance

Key components: Lamp base, shade, bulb socket (E14), on/off switch, power cord.

Package Contents

Unpack and verify all parts are present.

1. Lamp base (1 piece)
2. Lamp shade (1 piece)
3. Bulb socket assembly with cord (pre-assembled)
4. Mounting hardware (if applicable, e.g., screws)
5. Instruction manual (this document)

NOTE: Bulb not included. Use an E14 base bulb, max 15W (LED recommended).

Assembly Instructions

Assemble lamp on a clean, flat surface.

1. Attach the shade: Align shade with socket holder and secure by twisting or snapping into place.
2. Insert bulb: Screw an E14 bulb (max 15W) into the socket. Do not overtighten.
3. Place the assembled lamp on a stable, level surface.
4. Plug the power cord into a standard electrical outlet.

WARNING! Ensure lamp is unplugged during assembly. Do not force parts.

Specifications

• Model: ÅRSTID 602.806.39
• Bulb Type: E14 (small screw) base
• Max Wattage: 15W
• Recommended Bulb: LED or CFL for energy efficiency
• Power Supply: 120V AC, 60Hz (or local standard)
• Cord Length: Approximately 1.5 meters (5 feet)
• Dimensions: Varies; refer to product packaging
• Weight: Lightweight; easy to move

Controls and Operation

Operation is simple via the integrated switch.

To turn on: Press or flip the switch to the ON position. The lamp will illuminate.

To turn off: Press or flip the switch to the OFF position.

Tip: For best performance and energy savings, use an LED bulb.

Bulb Replacement

Replace bulb when it burns out or for a different brightness/color.

1. Turn off and unplug the lamp. Allow bulb to cool if recently used.
2. Remove the shade if necessary (gently twist or lift off).
3. Unscrew the old bulb counterclockwise.
4. Screw in a new E14 bulb (max 15W) clockwise. Do not overtighten.
5. Reattach the shade.
6. Plug in and test.

CAUTION! Always unplug lamp before replacing bulb to avoid electric shock.

Placement & Usage

Designed for indoor use on stable surfaces.

1. Place on a flat, stable table, desk, or nightstand.
2. Ensure cord is not pinched or a tripping hazard.
3. Keep away from edges where it could be knocked over.
4. Do not place near flammable materials (curtains, bedding).
5. Use for ambient, task, or accent lighting as needed.

Tip: For even light distribution, point shade opening upward or as desired.

Safety Information

Read all safety instructions before use.

• Use only with E14 bulb, max 15W. Higher wattage may cause overheating.
• Do not use outdoors or in damp/wet locations.
• Do not cover lamp or shade while in use to prevent overheating.
• Keep out of reach of children and pets.
• Inspect cord periodically for damage. Do not use if cord is frayed.
• Unplug when not in use for extended periods.

WARNING! Risk of fire or electric shock if misused. Follow all instructions.

Care & Cleaning

Unplug lamp before cleaning.

1. Use a dry, soft cloth to dust base and shade.
2. For fabric shades, use a vacuum with brush attachment gently.
3. Do not use liquids, chemicals, or abrasive cleaners.
4. Do not immerse any part of the lamp in water.

CAUTION! Never spray cleaners directly onto lamp. Moisture can damage electrical components.

Warranty & Support

IKEA limited warranty applies. Refer to IKEA warranty terms for details.

For product support, assembly questions, or parts:

• Visit: www.ikea.com
• Contact your local IKEA store.
• Refer to product number: 602.806.39

Copyright © IKEA. ÅRSTID is a trademark of Inter IKEA Systems B.V.

Troubleshooting

Disposal: Dispose of according to local regulations for electronic/electrical waste. Bulbs may require separate recycling.

Support: www.ikea.com or local IKEA store.