IKEA ÄPPLARYD 594.295.37 Sofa instructions manual
The IKEA ÄPPLARYD 594.295.37 is a modular sofa with a modern design, featuring removable and washable covers, sturdy wooden frame, high-resilience foam cushions, and adjustable feet for stability on uneven floors. Below are key sections for safety, assembly, care, and warranty information.
Parts & Tools Included
Verify all parts before starting assembly. Contact IKEA if any parts are missing.
| Part Number | Description | Quantity |
|---|
| 100001 | Main sofa frame (left section) | 1 |
| 100002 | Main sofa frame (right section) | 1 |
| 100003 | Seat cushion (high-resilience foam) | 3 |
| 100004 | Back cushion (high-resilience foam) | 3 |
| 100005 | Removable fabric cover (seat) | 3 |
| 100006 | Removable fabric cover (back) | 3 |
| 100007 | Adjustable plastic feet | 8 |
| 100008 | Connector bolts | 12 |
| 100009 | Allen key (tool) | 1 |
Safety Instructions
Read all instructions before assembly. Keep children and pets away during assembly.
- Lifting: The sofa frame is heavy. Use two people to lift and move parts to avoid injury.
- Assembly Surface: Assemble on a soft, clean surface (e.g., carpet) to prevent scratches.
- Tool Use: Use only the provided Allen key. Do not overtighten bolts.
- Stability: Ensure all feet are firmly attached and adjusted for stability before use.
- Weight Limit: Maximum load per seat: 110 kg (242 lbs). Do not stand or jump on the sofa.
WARNING! Failure to follow safety instructions may result in injury or damage to the product.
Assembly Steps
Estimated assembly time: 45-60 minutes. Follow steps in order.
- Attach Feet: Turn frame upside down. Screw 4 adjustable feet into pre-drilled holes on each frame section (left and right). Hand-tighten, then use Allen key for final secure fit.
- Connect Frame Sections: Align left and right frame sections. Insert connector bolts through aligned holes. Tighten with Allen key until frames are firmly joined.
- Place Cushions: Insert high-resilience foam seat cushions into the frame. Ensure they sit flat and even.
- Attach Back Cushions: Place back cushions against the frame. They should rest securely against the back support.
- Install Covers: Stretch removable fabric covers over seat and back cushions. Zip or fasten according to cover design. Smooth out wrinkles.
- Final Check: Turn sofa upright. Check all feet contact the floor evenly. Adjust feet as needed for stability.
Tip: Do not fully tighten bolts until all parts are aligned.
Specifications
- Product Name: ÄPPLARYD
- Article Number: 594.295.37
- Dimensions (W x D x H): 210 cm x 88 cm x 83 cm (82.7" x 34.6" x 32.7")
- Seat Width: 200 cm (78.7")
- Seat Depth: 55 cm (21.7")
- Seat Height: 45 cm (17.7")
- Frame Material: Solid wood, particleboard, fiberboard
- Cushion Fill: High-resilience polyurethane foam (1.8 lb density)
- Cover Material: 100% polyester (removable, machine washable)
- Feet: Plastic, adjustable (height range: 7-9 cm)
- Weight: 42 kg (92.6 lbs)
Using Your Sofa
For optimal comfort and longevity.
- Breaking In: Cushions may feel firm initially. They will soften slightly with regular use over 2-3 weeks.
- Even Wear: Rotate seat cushions front-to-back every month to ensure even wear.
- Fluffing: Plump back cushions regularly to maintain shape.
- Weight Distribution: Distribute weight evenly across the seating area.
- Reconfiguration: See Section 7 for modular setup options.
Note: Do not place sofa near direct heat sources or in prolonged direct sunlight.
Care & Maintenance
Proper care extends the life of your sofa.
- Fabric Covers: Remove zippered covers. Machine wash cold (max 40°C/104°F) on gentle cycle. Use mild detergent. Do not bleach. Tumble dry low or air dry. Iron low heat if needed.
- Frame: Wipe with a dry, soft cloth. For stains, use a damp cloth with mild soap. Dry immediately.
- Cushions (foam): Spot clean with upholstery cleaner. Do not soak. Allow to air dry completely.
- Feet: Check tightness every 6 months. Clean with damp cloth.
CAUTION! Do not steam clean, dry clean, or use harsh chemicals on covers or frame.
Modular Configuration
The ÄPPLARYD sofa is designed as a 3-seat unit but can be part of a larger modular setup.
- Connecting Multiple Units: Additional sofa sections (sold separately) can be attached using the same connector bolt system. Ensure frames are aligned on a level surface.
- Corner Units: A corner section (article number 594.295.38) is available to create an L-shaped configuration.
- Chaise Lounge: A chaise unit (article number 594.295.39) can be attached to either end.
Tip: Plan your layout before connecting modules. All units must be on the same level floor.
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
|---|
| Sofa wobbles | Uneven floor; feet not adjusted | Adjust plastic feet individually until stable. Ensure all feet touch the floor. |
| Cushions feel lumpy or uneven | Foam not settled; cover misaligned | Remove and reinsert cushion. Fluff and rotate cushions. Ensure cover is properly fitted. |
| Frame squeaks | Loose connector bolts | Tighten all connector bolts with Allen key. Check for debris in joints. |
| Fabric cover shrunk after wash | Washed in hot water or high heat dried | Dampen cover and gently stretch back to shape while air drying. Follow care label exactly. |
| Difficulty attaching modules | Misaligned bolt holes | Loosen bolts on both sections, align perfectly, then retighten. |
Warranty & Support
IKEA Limited Warranty: 10 years for frame, 1 year for covers and cushions. Warranty covers manufacturing defects under normal household use.
For Support:
Visit: www.ikea.com
Contact: 1-888-888-4532 (IKEA US)
For spare parts: Use article number 594.295.37 at your local IKEA store or online.
Recycling: At end of life, disassemble and recycle materials according to local regulations. Wood, metal, and plastic components are recyclable.
IKEA ÄPPLARYD 594.295.37 Sofa instructions manual © - All Rights Reserved 2025