IKEA ÄNGARNA 904.960.15 Table Lamp instructions manual

The IKEA ÄNGARNA 904.960.15 is a stylish and functional table lamp designed for ambient lighting. It features a fabric shade, a sturdy base, an E26/E27 socket compatible with LED bulbs (max 7W), an inline switch on the cord, and requires simple user assembly. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Safety Information 2. Parts & Tools Included 3. Assembly Instructions 4. Lamp Operation 5. Bulb Replacement 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Safety Information

Read all instructions before assembly and use.

Electrical Safety: Use only with 120V AC, 60Hz. Ensure power cord is undamaged.
Bulb Compatibility: Use only LED bulbs, max 7W. Do not exceed wattage.
Placement: Place on stable, level surface away from heat sources and water.
Supervision: Do not leave lamp unattended when in use for extended periods.
Children: Keep out of reach of young children during assembly and operation.

WARNING! Risk of electric shock. Unplug lamp before assembly, bulb replacement, or cleaning.

Parts & Tools Included

Inspect contents upon unboxing.

Part Name	Quantity	Description
Lamp Base	1	Main body with pre-attached cord
Fabric Shade	1	Soft, diffusing shade with metal frame
Shade Ring	1	Metal ring to secure shade to base
Bulb (not included)	0	Requires 1x E26/E27 LED bulb, max 7W
Instruction Manual	1	This document

Note: No tools required for assembly.

Assembly Instructions

Follow steps in order. Ensure lamp is unplugged.

Prepare Base: Place lamp base on a soft, flat surface to prevent scratches.
Install Bulb: Screw a compatible LED bulb (max 7W) into the socket clockwise until snug. Do not overtighten.
Attach Shade: Slide fabric shade over bulb, aligning the shade's frame with the base's top.
Secure Shade: Place the metal shade ring over the shade's frame and screw it onto the base threads clockwise until firm.
Final Check: Ensure shade is straight and secure. Gently tug cord to confirm it is not pinched.

CAUTION! Do not force parts. If resistance is met, check alignment.

Lamp Operation

Simple on/off control.

Plug In: Insert plug into a standard 120V wall outlet.
Turn On: Press the inline switch on the power cord to the "I" position.
Turn Off: Press the inline switch to the "O" position.
Adjustment: Lamp is stationary; position entire lamp for desired light direction.

Tip: Use for ambient lighting in living rooms, bedrooms, or offices.

Bulb Replacement

Replace bulb when light output diminishes or fails.

Unplug lamp and allow bulb to cool completely (at least 10 minutes).
Unscrew shade ring counterclockwise and remove fabric shade.
Unscrew old bulb counterclockwise and dispose of properly.
Screw in new E26/E27 LED bulb (max 7W) clockwise.
Reattach shade and secure with shade ring.
Plug in and test.

WARNING! Never use incandescent or halogen bulbs exceeding 7W to prevent overheating.

Care & Maintenance

Regular care ensures longevity.

Cleaning: Unplug lamp. Wipe base with dry, soft cloth. Use a vacuum brush attachment on fabric shade to remove dust.
Stains: Do not wet clean fabric shade. Spot clean gently with a slightly damp cloth if necessary; air dry completely.
Storage: Disassemble, wrap parts separately, and store in a cool, dry place.

CAUTION! Do not immerse lamp in water or use abrasive cleaners.

Specifications

Product Name: ÄNGARNA
Article Number: 904.960.15
Type: Table Lamp
Socket: E26/E27 (standard)
Max Bulb Wattage: 7W LED only
Power Supply: 120V AC, 60Hz
Cord Length: Approx. 6 feet (1.8 m)
Switch: Inline on cord
Materials: Steel base, fabric shade, plastic components
Dimensions (approx.): Height: 15", Base Diameter: 6"

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in; switch off; bulb burnt out	Plug into outlet; flip switch to "I"; replace bulb.
Lamp flickers	Loose bulb; incompatible bulb	Turn off, unplug, and tighten bulb. Ensure it's a max 7W LED.
Shade is loose or crooked	Shade ring not fully tightened	Unplug lamp. Tighten shade ring clockwise.
Overheating	Bulb wattage too high; ventilation blocked	Use only 7W LED bulb. Ensure lamp is in open area.
Damaged cord	Physical wear or tear	Stop use immediately. Unplug and contact IKEA support.

Note: This lamp contains no user-serviceable parts beyond bulb replacement.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or original receipt for details.

For Support:
Visit: www.ikea.com
Contact IKEA Customer Service: 1-888-888-4532
Reference Article Number: 904.960.15

Recycling: Dispose of electronic components and bulbs according to local regulations.