IKEA YNGVAR 604.007.45 Bar Stool instructions manual

The IKEA YNGVAR 604.007.45 is a modern bar stool featuring a sturdy steel frame, a comfortable seat, and a footrest. Designed for use at kitchen islands or high tables, it requires assembly and includes all necessary parts and tools. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Tools Included 2. Safety Instructions 3. Assembly Steps 4. Specifications 5. Adjustments & Use 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Parts & Tools Included

Before assembly, verify all parts are present. Key components: Seat, Frame (legs and footrest), Screws, Allen key.

Part NumberDescriptionQuantity
100001Seat unit1
100002Steel frame with legs1
100003Footrest bar1
100004Screw pack (M6 x 20mm)4
100005Allen key (4mm)1

Safety Instructions

Read all instructions before assembly. Ensure a safe workspace.

  1. Assembly: Requires two people. Keep children and pets away during assembly.
  2. Inspect parts: Check for damage before assembly. Do not use damaged parts.
  3. Tool use: Use provided Allen key only. Do not overtighten screws.
  4. Stability: Ensure all screws are fully tightened before use. Test stability on flat surface.

WARNING! Maximum load: 110 kg (242 lbs). Do not exceed. Do not stand on stool or footrest.

Assembly Steps

Follow steps in order. Estimated assembly time: 15-20 minutes.

  1. Attach legs to frame: Align legs with frame holes. Insert and tighten screws using Allen key.
  2. Install footrest: Slide footrest bar into designated slots on legs. Secure with screws.
  3. Attach seat: Place seat onto frame top. Align holes and insert remaining screws. Tighten firmly.
  4. Final check: Ensure all screws are tight. Wobble test on flat floor.

Tip: Do not fully tighten any screw until all parts are aligned.

Specifications

Adjustments & Use

This model is not height-adjustable. For optimal use:

  1. Place on flat, stable surface.
  2. Ensure all four legs contact the floor evenly.
  3. Use footrest for comfort; do not stand on it.
  4. Do not lean back excessively or tilt stool.

CAUTION! Avoid placing near heat sources or in damp areas.

Care & Maintenance

Clean regularly to maintain appearance.

  1. Frame: Wipe with a soft, damp cloth. Dry immediately. Do not use abrasive cleaners.
  2. Seat: Clean with mild soap and water. Avoid solvents.
  3. Periodically check and tighten screws if needed.

Warning: Do not use steam cleaners or high-pressure washers.

Troubleshooting

IssuePossible CauseSolution
Stool wobblesUneven floor or loose screwsCheck floor level; tighten all screws firmly.
Screw won't tightenCross-threaded or strippedRemove screw, realign parts, insert carefully.
Part doesn't fitWrong alignment or orientationRefer to diagram; ensure correct side/position.
Scratches on frameAssembly on rough surfaceAssemble on soft cloth or carpet. Touch up with matching paint if needed.

Missing parts? Contact IKEA customer service with article number.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or receipt for details.

Note: Keep receipt and assembly instructions for warranty claims.

IKEA YNGVAR 604.007.45 Bar Stool instructions manual © - All Rights Reserved 2025