IKEA VÅGHÖJD 005.141.94 Floor Lamp instructions manual

The IKEA VÅGHÖJD 005.141.94 is a modern floor lamp featuring a sleek metal frame, adjustable height, and an integrated LED light source. Designed for easy assembly and versatile placement in living rooms, bedrooms, or offices. Below are key sections for safety, parts list, assembly, operation, care, and troubleshooting.

1. Parts & Components 2. Safety Instructions 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Light Source Information 7. Placement & Adjustment 8. Care & Cleaning 9. Warranty Information 10. Troubleshooting

Parts & Components

Key components included in the package: Metal base, adjustable pole sections, lamp head with integrated LED, power cord with switch, assembly hardware, and instruction manual.

PartDescription
BaseWeighted metal base for stability
Pole Sections3 adjustable metal poles (S, M, L)
Lamp HeadIntegrated LED light source, non-replaceable
Power Cord2-meter cord with inline ON/OFF switch
Assembly HardwareScrews, washers, and Allen key
Instruction ManualThis document

Safety Instructions

Read all instructions before assembly and use.

  1. Ensure power is disconnected during assembly.
  2. Place on a stable, level surface to prevent tipping.
  3. Do not use outdoors or in damp locations.
  4. Keep away from children and pets during assembly.
  5. Use only with specified power source (see Specifications).

WARNING! Risk of electric shock. Do not attempt to disassemble the LED light source. If damaged, discontinue use immediately.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools required: Provided Allen key.

  1. Attach base: Place base upside down on soft surface. Insert the largest pole section (L) into the base socket and tighten the set screw using the Allen key.
  2. Add middle section: Slide the medium pole (M) onto the first pole, aligning the holes. Secure with provided screw.
  3. Add top section: Attach the smallest pole (S) to the middle section using the same method.
  4. Attach lamp head: Place the lamp head onto the top pole section. Secure with the final screw and washer.
  5. Route power cord: Thread the power cord through the center of the poles from the base to the lamp head. Ensure it is not pinched.
  6. Final check: Ensure all connections are tight and the lamp stands upright without wobbling.

CAUTION! Do not overtighten screws as this may damage the threads.

Specifications

Operation & Controls

The lamp is operated via the inline switch on the power cord. No dimming function is included.

To Turn On: Press the "I" side of the rocker switch on the cord.

To Turn Off: Press the "O" side of the rocker switch.

Note: The integrated LED will reach full brightness immediately. There is no warm-up time.

Light Source Information

This lamp uses a non-replaceable, integrated LED module.

IMPORTANT: The LED light source is not user-serviceable. If it fails, the entire lamp head may need to be replaced. Contact IKEA customer service.

Placement & Adjustment

For optimal use and safety:

  1. Place the lamp on a firm, level floor.
  2. Ensure the power cord is not a tripping hazard.
  3. Do not place near heat sources (radiators, stoves).
  4. To adjust height: Loosen the pole connection screws, slide the pole to the desired height, and retighten securely.
  5. The lamp head is fixed and does not swivel.

Tip: Ideal for use next to a reading chair or sofa for ambient or task lighting.

Care & Cleaning

Unplug the lamp from the power outlet before cleaning.

  1. Use a soft, dry cloth to wipe the metal and plastic surfaces.
  2. For stubborn marks, use a slightly damp cloth. Do not use abrasive cleaners or solvents.
  3. Do not immerse any part of the lamp in water or other liquids.

CAUTION! Never spray cleaning agents directly onto the lamp. Moisture can enter the electrical components and cause a hazard.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the original packaging or available at www.ikea.com.

For warranty service, keep your proof of purchase (receipt) and contact your local IKEA store.

Troubleshooting

SymptomPossible CauseCorrective Action
Lamp does not turn onNo power / Faulty switchCheck if the power outlet works. Ensure the cord switch is in the "I" position. Try a different outlet.
Lamp flickersLoose connectionCheck that the power cord is fully plugged in. Ensure all pole sections are tightly connected.
Lamp is unstableUneven floor / Loose basePlace on a level surface. Tighten the set screw connecting the base to the bottom pole.
Light is dim or has changed colorLED end of lifeThe integrated LED may be failing. The lamp head may need replacement.
Plastic smell when first usedNew componentsNormal for new electrical products. Ensure room is ventilated. It should dissipate after a few hours of use.

Recycling: At end of life, do not dispose with household waste. Take to an appropriate electrical recycling point.

Customer Service: Visit www.ikea.com or contact your local IKEA store for support.

IKEA VÅGHÖJD 005.141.94 Floor Lamp instructions manual © - All Rights Reserved 2025