IKEA VOXTORP 094.600.83 Door instructions manual

The IKEA VOXTORP 094.600.83 is a door panel designed for VOXTORP kitchen cabinets, featuring a modern handle-less design with an integrated push-open mechanism. It is constructed from particleboard with a foil finish, available in various colors, and is compatible with VOXTORP frames and hinges. Below are key sections for safety, features, installation, adjustment, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Tools Required 4. Installation Instructions 5. Hinge Adjustment 6. Push-Open Mechanism Setup 7. Care & Cleaning 8. Specifications 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Door panel, integrated push-open mechanism, pre-drilled holes for hinges, foil finish.

FeatureDescription
DesignHandle-less, modern push-to-open style
MaterialParticleboard with durable foil finish
MechanismIntegrated push-open system (no external handle)
CompatibilityVOXTORP cabinet frames and IKEA hinges
Pre-drilled holesFor easy hinge mounting (standard 35mm system)
Finish optionsAvailable in multiple colors (e.g., black-brown, white, gray)
DimensionsSee Specifications section for exact size
WeightLightweight for easy installation

Package Contents

Unpack and verify all parts before installation.

  1. VOXTORP door panel (1 piece)
  2. Mounting screws for hinges (included with hinges, not with door)
  3. Instruction manual (this document)

NOTE: Hinges are sold separately. Ensure you have compatible IKEA hinges (e.g., UTRUSTA).

Tools Required

Gather these tools before starting installation.

Tip: Use the correct screwdriver to avoid damaging screw heads.

Installation Instructions

Follow these steps to mount the door to your VOXTORP cabinet frame.

  1. Prepare the frame: Ensure the cabinet frame is securely mounted to the wall or base.
  2. Attach hinges: Mount the hinges to the cabinet frame using provided screws. Tighten securely but do not overtighten.
  3. Align door: Hold the door against the frame, aligning hinge plates with pre-drilled holes on the door.
  4. Secure door: Insert screws through hinge plates into door holes. Tighten screws gradually, checking alignment.
  5. Check operation: Open and close the door to ensure smooth movement. Adjust hinges if necessary (see Hinge Adjustment section).

WARNING! Ensure cabinet is stable and securely fixed before attaching the door to prevent tipping or injury.

Hinge Adjustment

Modern IKEA hinges allow fine-tuning for perfect door alignment.

  1. Height adjustment: Loosen the screw on the hinge arm, move door up/down, then retighten.
  2. Depth adjustment: Turn the screw on the hinge cup to move door closer to or farther from the frame.
  3. Side adjustment: Adjust the screw on the hinge plate to shift door left or right.
  4. Final check: Ensure door is level, evenly spaced, and opens/closes smoothly without rubbing.

CAUTION! Make small adjustments and test frequently to avoid misalignment.

Push-Open Mechanism Setup

The door uses a push-to-open system; no handle is required.

  1. Verify mechanism: The push-open mechanism is integrated into the hinge system.
  2. Adjust pressure: If door does not open easily, adjust the hinge tension screw (if available on your hinge model).
  3. Test function: Gently push the door inward, then release; it should pop open slightly. Push again to close.
  4. Troubleshoot: If mechanism is stiff, ensure hinges are properly aligned and not overtightened.

NOTE: For best results, use with IKEA push-open hinges designed for VOXTORP series.

Care & Cleaning

Proper care maintains appearance and functionality.

CAUTION! Never use solvents or abrasive cleaners; they can damage the foil finish.

Specifications

Safety Information

Important safety guidelines for installation and use.

  1. Always secure cabinet frames to wall to prevent tipping.
  2. Use appropriate tools and follow instructions carefully.
  3. Ensure door is properly aligned to avoid pinching fingers.
  4. Keep away from heat sources and direct sunlight to prevent warping.
  5. Do not overload door or use as a step or support.

WARNING! Children should not play with or hang on doors. Regularly check hinge tightness.

Warranty & Support

IKEA limited warranty applies. For assistance:

NOTE: Warranty does not cover damage from improper installation, misuse, or unauthorized modifications.

Troubleshooting

SymptomPossible CauseCorrective Action
Door does not open with pushHinge tension too tight; mechanism misalignedAdjust hinge tension screw; ensure hinges are properly installed.
Door sags or is misalignedLoose hinges; frame not levelTighten hinge screws; adjust hinge height/depth; check frame level.
Door rubs against frameMisaligned hingesAdjust side/depth screws on hinges for even gap.
Finish peeling or damagedExposure to moisture/heat; abrasive cleaningAvoid wet areas and direct heat; clean gently per instructions.
Screws not holdingStripped holes; incorrect screw sizeUse correct screws; if holes are stripped, fill with wood filler and redrill.

Reset: Loosen all hinge screws, realign door from scratch, then tighten gradually.

Service: For persistent issues, contact IKEA support or visit an IKEA store.

IKEA VOXTORP 094.600.83 Door instructions manual © - All Rights Reserved 2025