IKEA VOXNAN 603.426.23 Riser Rail instructions manual

The IKEA VOXNAN 603.426.23 is a riser rail designed to elevate a standard IKEA bed frame, creating valuable under-bed storage space. It is constructed from powder-coated steel for durability and stability. Below are key sections for safety, features, parts list, assembly instructions, usage guidelines, and care.

1. Features at a Glance 2. Parts & Tools Required 3. Safety Information 4. Assembly Instructions 5. Installation & Adjustment 6. Weight Capacity & Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Four sturdy riser legs, connecting rails, pre-attached rubber feet, and all necessary hardware.

Feature	Description
Material	Powder-coated steel frame
Function	Elevates bed frame to increase under-bed storage height
Compatibility	Designed for specific IKEA bed frames (check compatibility list)
Stability	Wide-legged design for enhanced stability
Protection	Integrated rubber feet to protect flooring
Assembly	Tool-free or minimal tool assembly (Allen key included)
Finish	Black or white powder-coat options

Parts & Tools Required

Unpack and verify all parts are present before starting assembly.

Parts Included: 4 Riser Legs, 2 Long Connecting Rails, 2 Short Connecting Rails, 8-12 Connecting Bolts, 8 Rubber Foot Pads (pre-attached), 1 Allen Key.
Tools You May Need: None typically required (Allen key provided). A rubber mallet may be helpful for snug fits.

WARNING! Do not discard packaging until assembly is complete and all parts are verified.

Safety Information

Read all instructions before assembly and use.

Weight Limit: Do not exceed the maximum weight capacity specified.
Stable Surface: Assemble and use only on a flat, stable, and level floor.
Two-Person Job: Lifting the bed frame during installation requires two people to prevent injury.
Secure Connections: Ensure all bolts are tightened securely according to instructions.
Child Safety: Ensure the elevated bed is stable and cannot tip. Do not allow children to play on or under the bed unsupervised.

CAUTION! An improperly assembled riser can collapse, causing serious injury or damage.

Assembly Instructions

Follow these steps in order. We recommend two people for assembly.

Prepare Area: Clear a large, flat space near where the bed will be located.
Connect the Frame: Lay the two long rails parallel. Connect the two short rails to the ends using the provided bolts and the Allen key. Ensure the frame is square.
Attach the Legs: Position a riser leg at each corner of the rectangular frame. Insert the bolts through the leg brackets into the pre-drilled holes on the frame rails. Tighten all bolts firmly with the Allen key.
Inspect: Check that all four legs are attached securely and the frame is rigid with no wobble.

Tip: Do not overtighten bolts, as this may strip the threads.

Installation & Adjustment

How to install the assembled riser rail under your IKEA bed frame.

Empty the Bed: Remove all bedding, mattress, and slats from the existing bed frame.
Position the Riser: Place the fully assembled riser on the floor where the bed will stand.
Lift and Place: With the help of a second person, carefully lift the empty bed frame and position it on top of the riser. Align the bed frame's legs or support points within the boundary of the riser frame.
Check Stability: Gently rock the bed frame. It should sit flat and stable on the riser without movement. Re-center if necessary.
Reassemble Bed: Replace the bed slats, mattress, and bedding.

WARNING! Never attempt to lift a bed with the mattress on it. Always lift from a stable position using your legs, not your back.

Weight Capacity & Specifications

Model Number: VOXNAN 603.426.23
Color: Black/White (as per packaging)
Material: Steel, Powder coating
Max. Load Capacity: [Please insert specific weight limit from product label, e.g., 300 kg / 661 lbs distributed weight]
Increased Height: Adds approximately 20-25 cm (8-10 inches) of under-bed clearance.
Package Dimensions & Weight: Check product packaging.

IMPORTANT: The total weight includes the bed frame, mattress, bedding, and occupants. Do not exceed the maximum load.

Care & Maintenance

To ensure longevity and safety.

Cleaning: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners or chemicals.
Regular Checks: Periodically (every 3-6 months) check that all bolts are tight.
Floor Protection: Inspect rubber feet regularly for wear and replace if damaged to prevent floor scratches.
Relocation: Always disassemble the bed (remove mattress and slats) before moving the riser with the bed frame.

CAUTION! Do not drag the riser or bed frame across the floor, as this may damage floors and the product.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bed wobbles on riser	Frame not centered; loose bolts; uneven floor	Re-center bed frame. Tighten all connection bolts. Ensure floor is level.
Riser feels unstable	Legs not fully attached; frame not square	Disassemble and reassemble, ensuring frame is square before tightening all bolts securely.
Squeaking noises	Metal parts rubbing; loose connections	Tighten all bolts. Apply a small amount of furniture wax or felt pad between contacting metal surfaces if necessary.
Scratches floor	Missing or damaged rubber feet	Check all four rubber feet. Replace if missing or worn.
Bed frame does not fit	Incompatible bed frame model	Verify VOXNAN compatibility with your specific IKEA bed model. Do not force a fit.

Warranty & Support

This IKEA product is backed by a limited warranty. Please refer to the IKEA warranty terms included with the product or available at IKEA stores.

For Assembly Help or Missing Parts: Visit the IKEA website (www.ikea.com) and use the product code 603.426.23 to find assembly guides, part diagrams, and contact information for spare parts.

Safety Notice: Always use genuine IKEA parts for repairs or replacements to maintain safety and warranty coverage.