IKEA VOXNAN 003.426.21 Bath Shower instructions manual

The IKEA VOXNAN 003.426.21 is a bath shower set designed for easy installation and reliable performance. It includes essential components for a complete shower system, suitable for standard bathroom setups. Below are key sections covering safety, product overview, installation, operation, maintenance, and troubleshooting.

Product Overview

Key components: Shower head with adjustable spray patterns, shower hose, wall bracket, mixer tap with temperature control, and mounting hardware.

Safety Instructions

Read all instructions before installation and use.

1. Ensure water supply is turned off before installation.
2. Check that water pressure is within specified limits (0.5-5 bar).
3. Do not overtighten connections to avoid damage.
4. Test for leaks after installation before regular use.

WARNING! Risk of scalding. Always test water temperature before entering shower. Do not leave children unattended.

Installation Guide

Follow these steps for proper installation.

1. Turn off main water supply and drain pipes.
2. Mark drilling positions for wall bracket using template.
3. Drill holes and insert wall plugs.
4. Mount wall bracket securely with provided screws.
5. Connect shower hose to mixer tap and shower head.
6. Connect hot and cold water lines to mixer tap.
7. Turn on water supply and check for leaks.
8. Adjust shower head height on bracket as needed.

CAUTION! Use appropriate tools. Ensure all connections are watertight.

Specifications

• Material: Chrome-plated brass, ABS plastic.
• Water Pressure: 0.5 - 5 bar (7-72 psi).
• Flow Rate: Max 9 liters per minute.
• Hose Length: 1.5 meters.
• Connections: 1/2" BSP standard.
• Temperature Range: Max 60°C (140°F).
• Warranty: 10 years against manufacturing defects.

Components and Parts

All parts included in package:

1. Shower head with adjustable face
2. 1.5m flexible shower hose
3. Wall mounting bracket
4. Single lever mixer tap
5. Mounting screws and wall plugs (6 pcs)
6. Rubber washers and O-rings
7. Instruction manual

Note: Check all parts before installation. Contact IKEA if any parts are missing.

Operating Instructions

Using your VOXNAN shower:

1. Turn lever upward to start water flow.
2. Move lever left for hotter water, right for colder.
3. Adjust shower head angle on bracket.
4. Rotate shower face to change spray pattern.
5. Pull diverter knob to switch between bath tap and shower.
6. After use, turn lever downward to stop water flow.

Tip: For water conservation, use the eco-flow setting on shower head.

Water Temperature Control

The mixer tap includes a temperature limiter for safety.

1. Default maximum temperature is set to 38°C (100°F).
2. To adjust temperature limit: Remove safety cap on lever.
3. Turn adjustment screw clockwise to increase limit, counterclockwise to decrease.
4. Replace safety cap after adjustment.

WARNING! Do not set maximum temperature above 60°C (140°F) to prevent scalding.

Maintenance and Cleaning

Regular maintenance ensures long performance.

1. Clean chrome surfaces with soft cloth and mild soap.
2. Do not use abrasive cleaners or scouring pads.
3. Descale shower head monthly by soaking in vinegar solution.
4. Check and replace washers annually if leaks occur.
5. Lubricate moving parts with silicone grease if needed.

CAUTION! Never use harsh chemicals that may damage chrome finish.

Warranty Information

10-year limited warranty. Covers manufacturing defects in materials and workmanship. Does not cover damage from improper installation, misuse, or normal wear. Keep receipt as proof of purchase. For warranty claims, contact IKEA customer service with product number 003.426.21.

Troubleshooting

Service: For assistance, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.