IKEA VIVALLA 605.157.89 Table Stand instructions manual

The IKEA VIVALLA 605.157.89 is a versatile table stand designed for stability and style, suitable for various table types and home environments. It features a sturdy metal frame, adjustable leveling feet, easy assembly with included hardware, and a sleek finish. Below are key sections for safety, parts list, assembly, installation, adjustment, care, and warranty information.

1. Parts & Hardware Included 2. Safety Instructions 3. Assembly Steps 4. Installation Guide 5. Adjustments & Leveling 6. Weight Capacity & Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Metal frame sections, leveling feet, mounting brackets, screws, and assembly tools.

Part Description	Quantity	Identification
Main Frame (Left/Right)	2	Labeled A1, A2
Cross Support Bar	1	Labeled B
Adjustable Leveling Feet	4	Labeled C
Mounting Brackets	4	Labeled D
Screws (M6 x 25mm)	12	Included in hardware pack
Allen Key (5mm)	1	Tool for assembly

Safety Instructions

Read all instructions before assembly. Ensure a safe working environment.

Work on a clean, flat surface to prevent parts from rolling or falling.
Use proper lifting techniques; the frame is heavy and may require two people.
Keep small hardware away from children to avoid choking hazards.
Do not exceed the maximum weight capacity specified.

WARNING! Failure to follow safety instructions may result in injury or damage to the product.

Assembly Steps

Follow these steps in order for proper assembly.

Lay out all parts and hardware as shown in the diagram.
Attach the cross support bar (B) between the two main frames (A1, A2) using four M6 screws.
Secure the mounting brackets (D) to each corner of the frame using the remaining screws.
Screw the adjustable leveling feet (C) into the bottom of each mounting bracket.
Tighten all screws firmly with the provided Allen key, but do not overtighten.

Tip: Ensure all connections are secure before proceeding to installation.

Installation Guide

Position the assembled stand correctly under your table.

Place the stand upside down on a soft surface to protect the finish.
Position your table top upside down onto the mounting brackets.
Align the brackets with pre-drilled holes in the table (if applicable).
Secure the table to the stand using appropriate screws (not included for table).
Carefully flip the table and stand upright with assistance.

CAUTION! Use at least two people to flip the table to avoid injury or damage.

Adjustments & Leveling

Adjust the feet to ensure the table stands level on uneven floors.

Leveling Feet: Rotate each foot clockwise to lower, counterclockwise to raise.
Check Level: Use a spirit level on the table surface after adjustment.
Stability: Ensure all four feet make solid contact with the floor.
Locking: Some models may include locking nuts; tighten to secure adjustment.

Weight Capacity & Specifications

Model: VIVALLA 605.157.89
Material: Steel frame, powder-coated finish.
Color: Black (as per packaging).
Max Load Capacity: 50 kg (110 lbs) evenly distributed.
Adjustable Height Range: 70-75 cm (27.5-29.5 inches) from floor to table top.
Footprint: 60 x 40 cm (23.6 x 15.7 inches).
Warranty: See limited warranty section.

Care & Maintenance

Proper care ensures longevity and appearance.

Clean the frame with a soft, dry cloth. For stubborn marks, use a damp cloth with mild soap.
Avoid abrasive cleaners or solvents that may damage the finish.
Periodically check and tighten screws to maintain stability.
Do not expose to excessive moisture or extreme temperatures.

CAUTION! Never use steel wool or harsh chemicals on the surface.

Troubleshooting

Issue	Possible Cause	Solution
Table wobbles	Uneven floor or loose feet	Adjust leveling feet; ensure all are in contact with floor.
Squeaking noise	Loose connections	Tighten all screws and brackets with Allen key.
Difficulty assembling	Misaligned parts	Refer to diagram; ensure parts are oriented correctly.
Scratches on frame	Improper handling	Assemble on soft surface; avoid dragging.
Exceeds weight limit	Overloading	Reduce load to within specified capacity.

Warranty & Support

IKEA provides a limited warranty for this product. For details, refer to the warranty card included in the packaging or visit the IKEA website.

Customer Support: For assembly questions or missing parts, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.

Recycling: Dispose of packaging materials responsibly according to local regulations.