IKEA VITVAL 704.112.77 Bunk Bed instructions manual

The IKEA VITVAL 704.112.77 is a modern, metal-framed bunk bed designed for safety, durability, and space-saving. It features a sturdy steel construction, integrated ladder, safety rails on the top bunk, and a versatile design suitable for children and teenagers. Below are key sections for safety warnings, parts list, tools required, step-by-step assembly instructions, care guidelines, and warranty information.

1. Safety Warnings & Important Information 2. Parts & Hardware List 3. Tools Required 4. Step-by-Step Assembly Instructions 5. Weight Limits & Mattress Specifications 6. Care & Maintenance 7. Disassembly & Moving Instructions 8. Troubleshooting & FAQs 9. Warranty & Contact Information

Safety Warnings & Important Information

Read all instructions before assembly. Failure to follow warnings can result in serious injury or death.

Warning	Description
Age Restriction	Top bunk suitable for children 6 years and older only.
Guardrails	Always use guardrails on both sides of top bunk. Ensure mattress thickness does not exceed guardrail height.
Ladder	Use only the provided ladder for accessing top bunk. Ensure it is securely attached.
Placement	Do not place bed near windows, ceiling fans, heaters, or blind/curtain cords.
Regular Checks	Periodically check and tighten all bolts, screws, and connections.
No Jumping	Do not allow jumping or rough play on the bed.
One Person	Only one person at a time on the top bunk.

Parts & Hardware List

Check that you have all parts before starting assembly. Contact IKEA if any parts are missing.

Main Frame: 4 x Side Rails (2 long, 2 short), 2 x End Frames (headboard & footboard).
Bed Slats: Set of metal slats for each bunk.
Ladder: 1 x Steel ladder with steps.
Guardrails: 2 x Full-length safety rails for top bunk.
Hardware Kit: Hex key (Allen wrench), bolts, nuts, washers, screws as per pack labeling.

IMPORTANT! Keep small parts away from children during assembly.

Tools Required

All necessary tools are included in the hardware pack.

Hex key (provided).
Phillips screwdriver (not included, may be needed for some steps).
Soft mallet or hammer (for tapping parts into place, use with care).

Tip: Assemble on a soft surface (e.g., carpet) to avoid scratching parts.

Step-by-Step Assembly Instructions

We recommend two adults for assembly. Follow steps in order.

Prepare Area: Clear space, lay out all parts, identify using instruction booklet diagrams.
Assemble End Frames: Connect headboard and footboard to side rails using bolts and hex key. Do not fully tighten until all connections are made.
Install Bed Slats: Place slats into slots on side rails for lower bunk first, then upper bunk. Ensure they are evenly spaced and secure.
Attach Guardrails: Secure guardrails to top bunk side rails using provided screws. Ensure they are firmly attached and immovable.
Install Ladder: Attach ladder to frame at designated points. Ensure all steps are tight and ladder is stable.
Final Tightening: Go back and tighten all bolts and screws securely. Check for stability.

CAUTION! Do not skip any steps. Ensure all connections are tight before use.

Weight Limits & Mattress Specifications

Top Bunk Max Weight: 220 lbs (100 kg) including mattress and occupant.
Lower Bunk Max Weight: No specific limit for static weight, but designed for standard adult use.
Mattress Size: Twin (39" x 75" / 99 cm x 190 cm) for each bunk.
Mattress Thickness (Top Bunk): Max 6 inches (15 cm) to ensure guardrail effectiveness.
Mattress Support: Bed slats are designed for use without a box spring.

Care & Maintenance

Regular care ensures longevity and safety.

Cleaning: Wipe metal frame with a soft, damp cloth. Dry immediately. Do not use abrasive cleaners.

Monthly Check: Inspect and tighten all bolts, screws, and ladder attachments. Check guardrails for stability.

Mattress: Air mattress regularly and follow mattress manufacturer's care instructions.

CAUTION! Never use harsh chemicals, steel wool, or power washers on the bed frame.

Disassembly & Moving Instructions

To disassemble for moving, reverse the assembly steps.

Remove mattress and bedding.
Using hex key, loosen and remove bolts in reverse order of assembly.
Detach ladder, then guardrails, then bed slats, and finally end frames.
Keep all hardware in a labeled bag taped to one of the main frame pieces.
Protect parts with moving blankets or cardboard during transport.

Tip: Take photos during disassembly to aid reassembly.

Troubleshooting & FAQs

Issue	Possible Cause	Corrective Action
Bed wobbles or squeaks	Loose connections	Tighten all bolts and screws. Check that frame is on level floor.
Guardrail feels loose	Screws not fully tightened or stripped	Check and tighten screws. If hole is stripped, contact IKEA for replacement part.
Ladder unstable	Not fully seated or tightened	Ensure ladder hooks are fully engaged on frame and attachment bolts are tight.
Mattress too thick for top bunk guardrail	Exceeds 6-inch limit	Use a thinner mattress to maintain safety gap below guardrail top.
Missing part	Not included or lost	Check all packaging. Contact IKEA customer service with product number (704.112.77).

Warranty & Contact Information

This product is covered by IKEA's limited warranty. Refer to the IKEA warranty document included with your purchase or available at IKEA stores.

For Assembly Support: Visit the IKEA website for assembly videos and guides.

For Missing Parts or Product Issues: Contact IKEA Customer Service at 1-888-888-4532 or visit www.ikea-usa.com. Have the product name (VITVAL) and article number (704.112.77) ready.

Safety Notices: Register your product online at IKEA to receive safety updates if applicable.