IKEA VITVAL 704.112.39 Loft Bed instructions manual

The IKEA VITVAL 704.112.39 is a versatile loft bed frame designed for sleep and study, featuring a sturdy metal construction, integrated desk space underneath, safety rails, and a slatted bed base for mattress support. It is suitable for children and adults, with a maximum load capacity as specified. Below are key sections for safety, parts list, assembly, setup, usage, and care.

1. Safety Information 2. Parts & Hardware List 3. Assembly Instructions 4. Specifications 5. Setup & Adjustment 6. Usage Guidelines 7. Care & Maintenance 8. Disassembly & Moving 9. Warranty Information 10. Troubleshooting

Safety Information

Key safety warnings: Ensure bed is assembled correctly on a level surface; use all provided parts; check tightness of connections regularly.

Warning	Description
Maximum load	Do not exceed weight limit for top bunk and desk area
Guardrails	Always use guardrails on both sides of top bunk
Age recommendation	Not recommended for children under 6 years in top bunk
Mattress thickness	Use mattress of recommended thickness to prevent falls
Placement	Keep away from ceiling fans, lights, and windows
Regular inspection	Check screws and joints every two weeks for tightness
No jumping	Do not allow jumping or rough play on bed
Ladder use	Always use ladder for climbing; face ladder when ascending/descending
Clearance	Ensure adequate clearance above and around bed
Tool safety	Use correct tools; keep away from children during assembly

Parts & Hardware List

Unpack and verify all parts before assembly. Check against packing list.

Main frame sections: Side rails, end panels, support beams.
Guardrails: Left and right safety rails with brackets.
Ladder: Metal ladder with steps and attachment hardware.
Desk components: Desk top, support brackets, shelf (if included).
Slatted bed base: Wooden slats and center support beam.
Hardware pack: Screws, bolts, washers, hex keys, instructions.

WARNING! Do not discard any parts until assembly is complete. Missing parts? Contact IKEA customer service.

Assembly Instructions

Assemble with two people in a clear space. Follow steps in order.

Prepare tools: Phillips screwdriver, hammer (if needed), hex key provided.
Assemble main frame: Connect side rails to end panels using bolts and washers.
Attach support beams: Secure cross beams for stability and slat support.
Install guardrails: Attach to top bunk frame using provided brackets and screws.
Mount ladder: Secure to frame at designated points; ensure steps are level.
Install desk: Attach desk top to support brackets under loft bed.
Place slatted bed base: Lay slats on support beams; secure if required.
Final check: Tighten all screws and bolts; ensure no sharp edges are exposed.

CAUTION! Do not overtighten screws; follow torque guidelines. Ensure guardrails are securely attached.

Specifications

Model: VITVAL 704.112.39
Material: Steel frame, powder-coated finish; wooden slats
Dimensions (assembled): Height: [Insert height] cm, Width: [Insert width] cm, Length: [Insert length] cm
Mattress size: Fits standard twin mattress (approx. 99x190 cm)
Weight capacity (top bunk): [Insert weight] kg
Desk dimensions: [Insert desk width] cm wide x [Insert depth] cm deep
Finish: White/black (as per variant)
Tools required: Included hex key; Phillips screwdriver recommended
Warranty: Limited warranty as per IKEA terms

Setup & Adjustment

Place bed on level floor; adjust feet if uneven. Ensure adequate room for ladder and desk chair.

Desk height: Fixed position under bed; ensure chair fits comfortably.

Guardrail height: Non-adjustable; ensure mattress thickness does not exceed rail top. Slat tension: Check slats are evenly spaced and secure. Ladder position: Can be mounted on left or right side as preferred; ensure steps are stable.

Usage Guidelines

Top bunk: Use guardrails at all times; no children under 6. Desk: Use for study/work; weight limit applies. Ladder: Climb facing ladder; one person at a time.

Inspect bed weekly for loose screws or damage.
Use recommended mattress size and thickness.
Do not hang heavy items from bed frame or guardrails.
Keep desk area organized to prevent overloading.

Tip: Use non-slip pads under mattress to prevent shifting.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners. Check hardware tightness every two weeks.

Frame: Wipe with soft, damp cloth; dry immediately.
Wooden slats: Dust regularly; avoid moisture.
Hardware: Tighten any loose screws or bolts promptly.
Mattress: Rotate periodically for even wear.
Desk surface: Clean with mild soap and water; avoid scratches.

WARNING! Do not use harsh chemicals; they may damage finish. Do not disassemble for cleaning.

Disassembly & Moving

To disassemble, reverse assembly steps. Label parts for reassembly.

CAUTION! Use two people; bed is heavy. Keep hardware in labeled bags.

Warranty Information

IKEA limited warranty covers manufacturing defects for specified period. Proof of purchase required. For warranty claims, contact IKEA customer service or visit www.ikea.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bed wobbles or shakes	Loose screws/bolts; uneven floor	Tighten all connections; adjust bed feet or place on level surface.
Guardrail feels loose	Brackets not tight; missing screws	Check bracket attachment; tighten screws; ensure all parts used.
Ladder unstable	Not fully attached; steps loose	Reattach ladder to frame; tighten step screws.
Squeaking noises	Metal joints rubbing; loose parts	Tighten bolts; apply lubricant to joints if needed.
Slats sagging or breaking	Excess weight; improper installation	Check weight limit; replace damaged slats; ensure center support is installed.
Desk surface uneven	Brackets not level; frame uneven	Adjust bracket placement; ensure frame is level.
Mattress doesn't fit	Wrong size mattress	Use recommended twin-size mattress (approx. 99x190 cm).
Missing parts	Not included in pack; lost during assembly	Contact IKEA for replacement parts using model number.

Service: For missing parts or assembly help: IKEA customer service: 1-888-888-4532; www.ikea.com.