IKEA VITTSJÖ 192.944.89 Shelf instructions manual
The IKEA VITTSJÖ shelf unit (article number 192.944.89) is a modern, open storage solution with a black-brown/glass design. It features a sturdy metal frame, tempered glass shelves, and an airy construction suitable for living rooms, offices, or bedrooms. Below are key sections for safety, parts list, assembly, installation, care, and warranty information.
Parts & Hardware
Check that all parts are included before starting assembly. Contact IKEA if any parts are missing.
| Part Description | Quantity | Image Reference |
|---|
| Metal frame side panel (black-brown) | 2 | A |
| Metal frame top/bottom panel (black-brown) | 2 | B |
| Tempered glass shelf (clear) | 2 | C |
| Metal shelf support bracket | 4 | D |
| Wall attachment device (anti-tip kit) | 1 set | E |
| Screw pack (includes screws, plugs, Allen key) | 1 set | F |
| Protective floor glides | 4 | G |
Safety Instructions
Read all instructions before assembly. Keep children and pets away during assembly.
- Tip-over hazard: This furniture can tip over. Always secure to wall using provided anti-tip device.
- Glass warning: Shelves are made of tempered glass. Handle with care to avoid chipping or breaking.
- Lifting: Assemble on a soft surface to avoid scratching. Use two people for lifting and positioning.
- Tools: Use only the provided Allen key. Do not overtighten screws.
WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure to wall.
Assembly Steps
Follow steps in order. Estimated assembly time: 30-45 minutes.
- Prepare workspace: Lay out all parts on a clean, soft surface (e.g., carpet or blanket).
- Attach side panels to bottom panel: Insert screws through bottom panel (B) into side panels (A). Tighten with Allen key.
- Install top panel: Connect top panel (B) to side panels (A) using remaining screws.
- Attach shelf support brackets: Screw brackets (D) into pre-drilled holes on inner frame at desired height.
- Place glass shelves: Carefully lower glass shelves (C) onto support brackets. Ensure they sit evenly.
- Attach floor glides: Press plastic glides (G) into bottom of each leg.
CAUTION! Do not stand or sit on the shelves. Glass may break under excessive weight.
Installation & Leveling
Proper installation prevents tipping and ensures stability.
- Choose location: Place on a flat, level floor against a wall.
- Wall attachment:
- Locate wall stud(s) using a stud finder.
- Position shelf unit against wall.
- Attach anti-tip bracket (E) to wall stud(s) using provided screws.
- Secure unit to bracket with screws through back panel.
- Leveling: If floor is uneven, adjust by adding felt pads under glides.
Tip: Use a spirit level to check that unit is vertical and shelves are horizontal.
Weight Limits & Placement
- Max load per glass shelf: 13 kg (28.7 lbs).
- Total max load: 30 kg (66 lbs) distributed across both shelves.
- Recommended items: Books, decorative objects, small electronics, photo frames.
- Avoid: Heavy appliances, aquariums, excessive weight in one spot.
- Placement: Keep away from direct sunlight, heat sources, and high humidity to preserve materials.
Care & Maintenance
Regular care maintains appearance and longevity.
- Metal frame: Wipe with a soft, damp cloth. Dry immediately. Do not use abrasive cleaners.
- Glass shelves: Clean with glass cleaner or vinegar/water solution. Use a microfiber cloth to avoid streaks.
- Protective glides: Check periodically for wear. Replace if damaged to prevent floor scratches.
CAUTION! Do not use harsh chemicals, ammonia-based cleaners, or steel wool on glass or metal.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|
| Unit wobbles or is unstable | Floor uneven; screws loose; not attached to wall | Level with pads; tighten all screws; secure to wall with anti-tip device. |
| Glass shelf does not sit flat | Support brackets not level; debris on brackets | Adjust bracket height; clean brackets before placing shelf. |
| Scratches on metal frame | Assembly on hard surface; abrasive cleaning | Assemble on soft blanket; use recommended cleaning methods. |
| Screws not tightening | Cross-threaded; wrong screw used | Remove and restart screw; verify screw type from parts list. |
| Wall attachment difficult | No wall stud in desired location | Use appropriate wall anchors for drywall; ensure anchor supports weight. |
Specifications
- Article Number: 192.944.89
- Color: Black-brown/Glass
- Dimensions: Width: 80 cm (31 ½") | Height: 123 cm (48 ⅜") | Depth: 35 cm (13 ¾")
- Shelf dimensions: 75 cm x 30 cm (29 ½" x 11 ¾")
- Weight: 15.5 kg (34.2 lbs)
- Material: Steel, Epoxy/polyester powder coating, Tempered glass
- Package dimensions: 84 cm x 12 cm x 125 cm (33" x 4 ¾" x 49 ¼")
- Package weight: 18.5 kg (40.8 lbs)
Warranty & Support
IKEA Limited Warranty: 10 years for VITTSJÖ series. Covers material and manufacturing defects under normal use. Does not cover damage from improper assembly, accidents, or lack of wall attachment.
Support: For missing parts, assembly help, or warranty claims:
- Visit: www.ikea.com
- Contact your local IKEA store
- Phone: 1-888-888-4532 (US)
Recycling: Dispose of packaging responsibly. Glass and metal are recyclable.
IKEA VITTSJÖ 192.944.89 Shelf instructions manual © - All Rights Reserved 2025