IKEA VISSVASS 404.141.02 String Lights instructions manual

The IKEA VISSVASS 404.141.02 is a decorative string light set designed for indoor use, featuring energy-efficient LED bulbs, a plug-in power adapter, and a convenient on/off switch. This manual covers safety instructions, product features, installation steps, operation guidelines, care instructions, and troubleshooting tips to ensure safe and enjoyable use.

1. Safety Information 2. Product Overview & Contents 3. Installation Instructions 4. Operation & Controls 5. Care & Maintenance 6. Troubleshooting 7. Specifications & Warranty

Safety Information

Read all safety instructions before use to prevent injury or damage.

FOR INDOOR USE ONLY. Do not use outdoors or in damp locations.
Unplug the lights before installing, moving, or cleaning.
Keep away from children and pets to avoid entanglement or electric shock.
Do not place near heat sources, flammable materials, or curtains.
Do not overload electrical outlets. Use only with provided adapter.
Do not attempt to repair damaged cords or bulbs. Contact IKEA support.
LED bulbs may become warm during use; allow to cool before handling.

WARNING! Risk of electric shock if used improperly. Always follow instructions.

Product Overview & Contents

Package includes all components for setup.

Component	Description	Quantity
LED String Lights	Main light string with integrated LEDs	1
Power Adapter	Plug-in transformer (Input: 120V AC)	1
Mounting Clips	Adhesive clips for securing lights	10
User Manual	This instruction booklet	1

Key Features:

Energy-efficient LED technology
Flexible wire for easy shaping
Built-in on/off switch on adapter
Warm white light (2700K)
Total length: 13.1 feet (4 meters)
20 LED bulbs spaced evenly

Installation Instructions

Follow these steps for safe and proper installation.

Unpack: Remove all components from packaging and lay them out.
Plan Layout: Decide where to place lights (e.g., along shelves, walls, or windows). Ensure the power outlet is within reach.
Prepare Surface: Clean and dry the surface where mounting clips will be attached.
Attach Clips: Peel backing from adhesive clips and press firmly onto surface. Allow adhesive to set for 1 hour before hanging lights.
Hang Lights: Gently weave the light string through the clips. Do not pull tightly or bend wires sharply.
Connect Power: Plug the adapter into a standard 120V AC wall outlet. Keep adapter accessible and away from covered areas.
Test: Turn on using the switch on the adapter to verify all LEDs illuminate.

CAUTION! Do not use nails, staples, or tacks to secure lights, as this may damage wires.

Operation & Controls

Simple controls for everyday use.

On/Off Switch: Located on the power adapter. Press to turn lights on or off.

Power Indicator: A small LED on the adapter glows red when plugged in and powered.

Usage Tips:

Use for decorative ambient lighting only, not for task lighting.
Recommended maximum daily use: 8 hours to prolong LED life.
Unplug when not in use for extended periods.
Do not connect multiple VISSVASS light sets together.

Care & Maintenance

Proper care ensures longevity and safety.

Cleaning: Unplug lights. Wipe bulbs and wire with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.
Storage: When not in use, unplug and coil lights loosely. Store in a cool, dry place away from direct sunlight.
Bulb Replacement: LEDs are non-replaceable. If a bulb fails, the entire string may need replacement.
Inspection: Periodically check wires, adapter, and plugs for damage. Discontinue use if any defects are found.

CAUTION! Never immerse lights, adapter, or plugs in water or other liquids.

Troubleshooting

Refer to this table for common issues and solutions.

Symptom	Possible Cause	Corrective Action
Lights do not turn on	Not plugged in / Switch off / Outlet issue	Ensure adapter is firmly plugged into a working outlet. Flip the switch to ON position. Test outlet with another device.
Partial lights out	Loose bulb / Damaged wire	Gently press each LED to ensure it's seated. Check for visible wire damage. Do not attempt to repair.
Adapter is warm	Normal operation / Overheating	Some warmth is normal. Ensure adapter is in a well-ventilated area, not covered by fabrics.
Lights flicker	Loose connection / Adapter fault	Check all connections. Try a different outlet. If problem persists, adapter may be faulty.
Adhesive clips fail	Surface not clean / Weight overload	Clean surface with rubbing alcohol, let dry, reapply clip. Do not hang heavy objects on wire.

Reset: Unplug adapter for 30 seconds, then plug back in.

Specifications & Warranty

Model: VISSVASS 404.141.02
Light Source: 20 x Non-replaceable LEDs
Color Temperature: Warm White (2700K)
Cord Length: 13.1 ft (4 m) total
Input Voltage: 120V AC, 60Hz
Adapter Output: Low Voltage DC (Safety Extra Low Voltage - SELV)
Power Consumption: 2.4W
Estimated LED Life: 15,000 hours
Operating Temperature: 32°F to 95°F (0°C to 35°C)
Warranty: Refer to IKEA limited warranty included with product or visit IKEA website.

Disposal: Dispose of according to local regulations for electronic waste. Do not dispose with household trash.

Customer Support: For assistance, visit www.ikea.com or contact your local IKEA store.