IKEA VIRRMO 604.871.83 Work Lamp instructions manual

The IKEA VIRRMO 604.871.83 is a versatile work lamp designed for focused task lighting. It features an adjustable arm and head for precise light direction, an energy-efficient LED light source, a stable clamp base for secure attachment to desks or shelves, an on/off switch, and a flexible gooseneck. Suitable for home offices, workshops, or study areas. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Mounting 4. Specifications 5. Controls and Operation 6. Adjusting the Lamp 7. Replacing the Light Source 8. Safety Information 9. Care & Maintenance 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable LED lamp head, Flexible gooseneck arm, Clamp base with protective pads, On/Off switch, Power cord.

Feature	Description
LED Light Source	Energy-efficient, long-lasting, cool operation
Adjustable Gooseneck	Flexible arm for precise positioning
Clamp Base	Securely attaches to surfaces up to 2.4" thick
Swivel Lamp Head	Rotates to direct light where needed
On/Off Switch	Integrated switch on the cord or base
Protective Pads	Prevents damage to clamped surface
Power Cord	Standard AC power connection
Weighted Base Option	Alternative to clamp for free-standing use
Dimmable (if applicable)	Check model for dimming capability
Color Temperature	Warm white or cool white light output

Assembly Instructions

Unpack all parts and check contents against parts list.

Attach the clamp base: If using the clamp, ensure the protective pads are in place.
Connect the gooseneck: Insert the end of the gooseneck into the receptacle on the base and tighten the securing knob.
Attach the lamp head: Connect the lamp head to the top of the gooseneck and secure it.
Route the power cord: Arrange the cord neatly along the arm or base as designed.

WARNING! Ensure all connections are tight before use. Do not force parts during assembly.

Installation & Mounting

Choose a suitable location for the lamp.

For clamp mounting: Open the clamp, position it on the edge of a desk, shelf, or board (max thickness 2.4"/6 cm). Tighten the clamp screw firmly.
For weighted base: Place the base on a flat, stable surface. Ensure it is not near the edge.
Plug into power outlet: Use a standard 120V AC outlet. Do not overload the circuit.
Test the lamp: Turn on the switch to verify operation.

CAUTION! Ensure the clamp is securely fastened and the surface can support the lamp's weight.

Specifications

Model: VIRRMO 604.871.83
Light Source: Integrated LED (non-replaceable or replaceable - check model)
Power Consumption: [e.g., 7W]
Lumen Output: [e.g., 600 lumens]
Color Temperature: [e.g., 4000K]
Adjustability: Gooseneck arm, swivel head
Mounting: Clamp (max. 2.4"/6 cm thickness) or weighted base
Cord Length: [e.g., 5.9 ft / 1.8 m]
Input Voltage: 120V AC, 60Hz
Dimensions: Height adjustable; base dimensions as specified.

Controls and Operation

Primary control is the On/Off switch located on the power cord or lamp base.

Operation: Press or toggle the switch to turn the lamp on or off. If dimmable, a separate dial or switch may be present.

Positioning: Gently bend the gooseneck to direct light. Rotate the lamp head to adjust the beam angle.

Note: Avoid excessive bending or twisting of the gooseneck beyond its designed limits.

Adjusting the Lamp

The lamp is designed for flexible positioning.

Bend the gooseneck: Apply gentle pressure to shape the arm. Hold the base steady.
Swivel the head: Grasp the lamp head and rotate it to the desired angle.
Lock position (if applicable): Some models have a tension adjustment knob to secure the arm.
For clamp: Loosen the clamp screw to reposition the entire lamp on a surface, then retighten.

Tip: Adjust the lamp while it is off to avoid touching a hot surface (if using an older non-LED bulb).

Replacing the Light Source

This model may feature an integrated LED (non-replaceable) or a replaceable LED bulb.

Ensure the lamp is unplugged and cool.
If replaceable: Access the bulb compartment, usually by twisting or pulling the diffuser cover.
Remove the old bulb and insert a new one of the same type and rating (e.g., E12 base, 7W max).
Replace the cover and plug in the lamp to test.

WARNING! Never attempt to replace an integrated LED module. For integrated LEDs, contact IKEA for service if light fails.

Safety Information

Read all instructions before use.

Use only with specified voltage.
Do not use outdoors or in damp locations.
Keep away from children. The clamp is a pinch point.
Do not cover the lamp or place flammable materials near it.
Unplug before cleaning or maintenance.
Do not look directly into the LED light source.

CAUTION! Risk of electric shock or fire if misused. Do not modify the cord or plug.

Care & Maintenance

Unplug the lamp before cleaning. Wipe the base, arm, and shade with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth. Do not use abrasive cleaners or chemicals.

CAUTION! Do not immerse any part of the lamp in water or other liquids.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included with the product or available at www.ikea.com. Warranty covers defects in materials and workmanship under normal household use. Keep your receipt as proof of purchase. For service, contact your local IKEA store or the IKEA customer support line.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / faulty switch	Check if plugged in; try a different outlet; check the switch.
Lamp flickers	Loose connection / bulb issue	Ensure plug is secure; check bulb (if replaceable) is properly seated.
Lamp arm is loose	Tension adjustment needed	Tighten the tension knob (if present) at the base of the gooseneck.
Clamp slips	Insufficient tightening / surface too thick	Tighten clamp screw; ensure surface thickness is within limit (2.4"/6cm).
Light is dim or uneven	End of LED life / power issue	If integrated LED, the unit may need replacement. Check power source.

Disposal: Dispose of according to local regulations for electronic waste. Do not dispose of with household trash.

Customer Support: Visit www.ikea.com or contact your local IKEA store.