IKEA VINSTGIVANDE 104.621.42 Range Hood instructions manual

The IKEA VINSTGIVANDE 104.621.42 is a wall-mounted range hood designed for efficient kitchen ventilation. It features multiple fan speeds, integrated lighting, aluminum grease filters, and a recirculation or external exhaust option. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Installation 4. Specifications 5. Controls and Operation 6. Ventilation Modes 7. Maintenance & Cleaning 8. Replacing Parts 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Wall-mounted hood body, Control panel, Aluminum grease filters, Lighting unit, Exhaust duct adapter, Recirculation charcoal filter (optional), Mounting hardware.

FeatureDescription
Control PanelTouch or button controls for fan speed and lights
Fan Speeds3-4 speed settings (including boost)
LightingIntegrated LED or halogen lights
Grease FiltersRemovable aluminum mesh filters
Ventilation ModesDucted (external exhaust) or Ductless (recirculation)
Power SourcePlug-in or hardwired to household electrical
DimensionsStandard width to fit over common cooktops
MaterialsStainless steel or coated metal finish
Noise LevelVaries by speed setting (dB rating)
Safety Cut-offOptional thermal protection

Safety Information

Read all instructions before installation and use.

  1. Electrical Safety: Ensure power is disconnected during installation. Only connect to properly grounded outlet.
  2. Fire Safety: Do not flambé under the hood. Clean grease filters regularly to prevent fire hazard.
  3. Installation Height: Install at manufacturer's recommended height above cooking surface (typically 65-75 cm for electric, 75-85 cm for gas).
  4. Ventilation: Ensure ducting is short, straight, and with minimal bends for optimal performance.
  5. Children: Keep children away from controls. Supervise if they are using the appliance.

WARNING! Never disconnect the appliance under load. Risk of electric shock.

Installation

Unpack and inspect all parts. Verify wall structure can support hood weight.

  1. Choose Ventilation Mode: Decide between ducted (external) or ductless (recirculation) operation.
  2. Mount Template: Use provided paper template to mark drill holes on wall.
  3. Drill and Mount: Drill holes, insert wall plugs, and secure mounting bracket.
  4. Hang Hood: Lift hood onto bracket and secure with screws.
  5. Connect Ducting (Ducted Mode): Attach ductwork to hood outlet and route to exterior vent.
  6. Install Filters: Insert grease filters. For ductless mode, add charcoal filters.
  7. Electrical Connection: Connect to power supply following local electrical codes.
  8. Final Check: Ensure all screws are tight and hood is level.

CAUTION! Hood is heavy; use two people for lifting. Ensure secure mounting to prevent falling.

Specifications

Controls and Operation

Control panel located on front of hood.

Buttons/Functions:

Operation:

  1. Turn on lights if needed for cooking visibility.
  2. Select fan speed appropriate for cooking activity (low for simmering, high for frying).
  3. Run hood during cooking and for 5-10 minutes after to clear residual steam and odors.
  4. Use boost setting for maximum extraction.
  5. Turn off lights and fan when finished.

Ventilation Modes

Ducted (External Exhaust) Mode:

Ductless (Recirculation) Mode:

To Convert: Follow installation instructions to install or bypass the duct adapter and install charcoal filters if using recirculation.

Maintenance & Cleaning

Regular Cleaning:

  1. Exterior: Wipe with soft, damp cloth and mild detergent. Dry immediately. Do not use abrasive cleaners.
  2. Grease Filters: Clean every 4-8 weeks of use.
    • Remove filters by pulling latch or sliding out.
    • Soak in hot water with mild degreaser or in dishwasher (top rack).
    • Rinse and dry completely before reinstalling.
  3. Charcoal Filters (Ductless mode): Replace every 3-6 months. Not washable.
  4. Light Bulbs/LEDs: Replace when burnt out. Ensure power is off. Use specified bulb type (e.g., E14, 3W max).

CAUTION! Disconnect power before any maintenance. Do not immerse motor unit in water.

Replacing Parts

Common replaceable parts: Grease filters, Charcoal filters, Light bulbs/LED modules, Control panel buttons (if separate).

Ordering Parts: Use model number VINSTGIVANDE 104.621.42. Contact IKEA customer service or visit IKEA website for spare parts.

Regulatory Information

This appliance complies with relevant safety and EMC directives. Disposal: At end of life, dispose of according to local regulations for electronic waste. Do not dispose with household trash. For EU: Complies with Directive 2014/35/EU (LVD) and 2014/30/EU (EMC). Copyright and design rights owned by Inter IKEA Systems B.V.

Troubleshooting

SymptomPossible CauseCorrective Action
Hood does not turn onNo powerCheck if plugged in / circuit breaker. Ensure power switch is on.
Weak suctionClogged filters / ductClean grease filters. Check duct for blockages. Ensure damper (if any) opens freely.
Loud noise/vibrationLoose parts / fan imbalanceTighten all screws. Ensure filters are correctly seated. Check duct for restrictions.
Lights not workingBurnt out bulb / faulty connectionReplace bulb/LED. Ensure power is connected.
Motor runs but no airflow (Ductless)Charcoal filters saturatedReplace charcoal filters.
Unpleasant odor (Ductless)Filters need replacingReplace charcoal filters. Clean grease filters.
Button/control not respondingSticky residue / faulty controlClean control panel with damp cloth. Disconnect power for 1 minute then reconnect. If persists, contact service.

Reset: Disconnect from power for 5 minutes, then reconnect.

Service: For assistance, contact IKEA customer support or visit the IKEA website. Have model number ready.

IKEA VINSTGIVANDE 104.621.42 Range Hood instructions manual © - All Rights Reserved 2025