IKEA VINGMAST 294.308.82 Lamp Shade instructions manual

The IKEA VINGMAST 294.308.82 is a stylish and functional lamp shade designed for use with compatible IKEA lamp bases. It features a classic design, is easy to assemble and install, and helps diffuse light for a pleasant ambiance. Below are key sections for safety, features, assembly, installation, care, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Safety Information 4. Assembly Instructions 5. Installation 6. Care & Cleaning 7. Troubleshooting 8. Specifications 9. Warranty & Support

Features at a Glance

Key components: Lamp shade frame, fabric/paper shade diffuser, mounting hardware.

Feature	Description
Design	Classic, versatile design suitable for various room styles
Material	Durable frame with fabric or paper light diffuser
Compatibility	Designed for specific IKEA lamp bases (check compatibility)
Light Diffusion	Softens light to reduce glare and create ambient lighting
Assembly	Tool-free or minimal tool assembly required
Mounting	Secure attachment to lamp base via included hardware

Parts Included

Unpack and verify all parts are present before assembly.

1 x Lamp Shade Frame (main structure)
1 x Shade Diffuser (fabric/paper)
1 x Set of Mounting Screws/Clips (as required)
1 x Instruction Manual (this document)

NOTE: Lamp base and light bulb are sold separately unless specified.

Safety Information

Read all instructions before assembly and use.

Ensure the lamp is unplugged before assembly or maintenance.
Use only with compatible IKEA lamp bases and recommended bulb wattage (see specifications).
Do not use with bulbs exceeding the maximum wattage rating.
Keep away from heat sources, water, and flammable materials.
Do not modify the shade or use damaged parts.

WARNING! Risk of fire or electric shock if used improperly. Ensure proper installation.

Assembly Instructions

Follow these steps for correct assembly. Work on a clean, flat surface.

Prepare Frame: Unfold the lamp shade frame carefully.
Attach Diffuser: Align the shade diffuser with the frame. Gently stretch or slide it over the frame, ensuring it sits evenly without wrinkles.
Secure Diffuser: If included, use any clips or fasteners to secure the diffuser to the frame at the top and/or bottom.
Check Fit: Ensure the diffuser is taut and properly seated on the frame.

CAUTION! Handle the diffuser material gently to avoid tearing.

Installation

Install the assembled shade onto your compatible IKEA lamp base.

Ensure the lamp base is unplugged and the existing bulb (if any) is cool to the touch.
Position the lamp shade over the bulb socket/harp of the lamp base.
Align the mounting points on the shade frame with those on the lamp base.
Secure the shade using the provided screws, clips, or locking mechanism. Tighten firmly but do not overtighten.
Install a compatible light bulb (not exceeding max wattage).
Plug in the lamp and test.

Tip: Refer to your lamp base manual for specific installation details.

Care & Cleaning

Unplug the lamp and allow the bulb to cool completely before cleaning.

Dusting: Use a soft, dry cloth or a feather duster to remove dust from the shade.
Spot Cleaning: For fabric shades, use a slightly damp cloth with mild soap if necessary. Test on an inconspicuous area first. Do not soak.
Drying: Allow the shade to air dry completely before re-installing or powering on.
Frame: Wipe the frame with a dry cloth.

CAUTION! Do not use abrasive cleaners, solvents, or immerse in water. Do not clean while the lamp is on or the bulb is hot.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Shade wobbles or is loose	Not securely attached	Turn off lamp. Check and tighten all mounting screws/clips. Ensure it's seated correctly on the base.
Shade appears uneven or wrinkled	Diffuser not aligned during assembly	Remove shade, reposition diffuser on frame evenly, and re-secure.
Light appears too dim or uneven	Bulb wattage too low/shade not compatible	Use a bulb with appropriate wattage and type (e.g., clear vs. frosted). Ensure shade is designed for your lamp base.
Shade material discoloring	Bulb wattage too high / heat damage	Immediately replace with a bulb that does not exceed the maximum wattage rating. Keep shade away from other heat sources.
Cannot attach to lamp base	Incompatible base or missing parts	Verify lamp base compatibility. Check you have all required mounting hardware.

Specifications

Product Name: VINGMAST
Article Number: 294.308.82
Type: Lamp Shade
Dimensions (approx.): [Height] x [Width/Diameter] (Refer to packaging)
Material (Frame): Metal/Steel
Material (Diffuser): Fabric/Paper
Max Bulb Wattage: [e.g., 60W] or equivalent LED (Check label on shade or frame)
Compatible Bases: Specific IKEA lamp models (check IKEA website or product page)

Warranty & Support

This IKEA product is covered by the IKEA commercial warranty. Refer to the IKEA warranty terms for details.

For assembly help, spare parts, or other support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the product page for the specific VINGMAST 294.308.82 manual or guides.

Note: Always keep your proof of purchase.