IKEA VINDKAST 905.390.91 Floor Lamp instructions manual

The IKEA VINDKAST 905.390.91 is a modern floor lamp featuring a sleek metal frame, adjustable height, energy-efficient LED light source, touch dimmer control, and a stable weighted base. It provides ambient lighting suitable for living rooms, bedrooms, or offices. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Safety Instructions 4. Assembly Instructions 5. Specifications 6. Operation & Controls 7. Light Adjustment & Placement 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Adjustable metal stand, weighted base, integrated LED light panel, touch-sensitive dimmer control, and cable management.

Feature	Description
Adjustable Height	Extendable pole from 120cm to 150cm
Light Source	Integrated non-replaceable LED panel
Dimmer Control	Touch-sensitive with 3 brightness levels
Base	Weighted circular base for stability
Frame Material	Powder-coated steel
Power Input	Standard 120V AC wall plug
Cable Length	1.8 meters (6 feet)
Light Color	Warm white (2700K)
Weight	3.5 kg (7.7 lbs) assembled
Recommended Room	Living room, bedroom, study

Parts Included

Unpack and verify all parts before assembly.

Base plate (weighted)
Main pole section (3 pieces)
Light head assembly with LED panel
Set of screws and Allen key
Power cord with plug
Instruction manual

IMPORTANT! Check for any damage during shipping. Contact IKEA if parts are missing.

Safety Instructions

Read all instructions before assembly and use.

Use only with 120V AC power outlet.
Do not disassemble the integrated LED light source.
Keep away from water and humid environments.
Ensure the lamp is on a flat, stable surface.
Do not cover the lamp or place near heat sources.
Unplug before cleaning or moving.

WARNING! Risk of electric shock if used improperly. Not for outdoor use.

Assembly Instructions

Estimated assembly time: 15-20 minutes.

Attach the base: Place base plate on flat surface, insert bottom pole section, tighten screw with provided Allen key.
Extend the pole: Add middle and top pole sections, adjusting to desired height. Secure each connection.
Attach light head: Place light head assembly on top pole, align, and secure with final screw.
Route the cable: Thread power cord through cable guides along the pole.
Final check: Ensure all screws are tight and the lamp stands upright without wobbling.

Tip: Assemble on a soft surface to avoid scratching the finish.

Specifications

Model: VINDKAST 905.390.91
Height: Adjustable 120-150 cm (47-59 inches)
Base Diameter: 30 cm (12 inches)
Light Output: 800 lumens
Power Consumption: 10W
Color Temperature: 2700K (Warm White)
Dimmable: Yes, 3 levels (Low/Medium/High)
Voltage: 120V AC, 60Hz
Certifications: ETL listed, Energy Star compliant
Warranty: 1-year limited warranty

Operation & Controls

Touch control panel located on the light head or pole (model dependent).

Basic Operation:

Plug into wall outlet.
Touch the control panel once to turn on at low brightness.
Touch again to cycle through medium and high brightness.
Touch and hold (2 seconds) to turn off.

Note: The lamp remembers the last brightness setting when turned off and on again.

Light Adjustment & Placement

For optimal lighting and ambiance.

Place lamp in a corner or beside furniture to create indirect lighting.
Adjust height based on seating area—higher for general light, lower for reading light.
Angle the light head slightly for directed light if adjustable.
Use the dimmer to match room activity: low for relaxing, high for reading.

Tip: Avoid placing directly opposite TV or computer screens to reduce glare.

Care & Maintenance

Unplug lamp before any cleaning.

Wipe metal surfaces with a soft, dry cloth.
For stubborn marks, use a slightly damp cloth, then dry immediately.
Clean the LED panel with a microfiber cloth—no liquids or cleaners.
Check screw tightness every few months.

CAUTION! Do not use abrasive cleaners, solvents, or spray directly on the lamp.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Power outage	Check wall outlet and plug connection. Try another outlet.
Touch control unresponsive	Dirty sensor / System lock	Clean touch area with dry cloth. Unplug for 30 seconds, then retry.
Lamp flickers	Loose connection / Faulty outlet	Ensure all pole connections are tight. Test with different outlet.
Lamp wobbles	Uneven floor / Loose base	Place on flat surface. Tighten base screw with Allen key.
Light dimmer not cycling	Control panel fault	Unplug for 1 minute to reset. If persists, contact support.

Reset: Unplug from power for 60 seconds to reset electronic controls.

Warranty & Support

This IKEA product is covered by a 1-year limited warranty from date of purchase. Warranty covers defects in materials and workmanship. Not covered: damage from misuse, improper assembly, accidents, or normal wear. For support, visit www.ikea.com or contact IKEA customer service at 1-888-888-4532. Keep your receipt as proof of purchase.