IKEA VINDKAST 305.392.11 Table Lamp instructions manual

The IKEA VINDKAST 305.392.11 is a stylish and functional table lamp designed for ambient lighting. It features a stable base, a fabric shade, an integrated on/off switch, and uses a standard E26/E27 bulb socket (max 7W LED or equivalent). Below are key sections for safety, features, assembly, operation, care, and troubleshooting.

Features at a Glance

Key components: Fabric shade, metal/plastic base, bulb socket with integrated switch, power cord.

Parts Included

Unpack and verify all parts before assembly.

1. Lamp base (1 piece)
2. Fabric shade (1 piece)
3. Bulb socket with pre-attached cord/switch (1 set)
4. Hardware (screws/washers if required)
5. Instruction manual (this sheet)

WARNING! Check for damage before assembly. Do not use damaged parts.

Assembly Instructions

Follow steps in order. Ensure lamp is unplugged during assembly.

1. Attach base: If base is multi-part, connect sections as shown in diagram.
2. Install socket: Thread cord through base opening; secure socket to top of base.
3. Attach shade: Place fabric shade over socket; secure with provided ring or clips.
4. Insert bulb: Screw in a compatible bulb (max 7W LED).
5. Plug in: Connect power cord to wall outlet.

CAUTION! Do not overtighten parts. Ensure shade is securely attached.

Specifications

• Model: VINDKAST 305.392.11
• Bulb Socket: E26/E27 standard
• Max Wattage: 7W LED or equivalent (do not exceed)
• Power Supply: 120V AC, 60Hz
• Cord Length: Approximately 6 feet
• Materials: Fabric, metal, plastic
• Dimensions: Height: ~12 inches; Base diameter: ~6 inches
• Weight: ~2.2 lbs (assembled)

Controls and Operation

Operation is simple via the integrated switch.

Switch: Located on power cord or base. Press or slide to turn lamp ON/OFF.

Bulb: Use only recommended bulb type and wattage for optimal performance and safety.

Tip: For ambient lighting, place lamp on stable surface away from direct sunlight or heat sources.

Bulb Replacement

Replace bulb when light output diminishes or bulb fails.

1. Turn lamp OFF and unplug from outlet.
2. Allow bulb to cool completely if recently used.
3. Gently unscrew old bulb from socket.
4. Screw in new compatible bulb (max 7W LED). Do not overtighten.
5. Plug in lamp and turn ON to test.

WARNING! Never use bulbs exceeding max wattage. Risk of fire or damage.

Placement & Usage

For best results and safety, follow placement guidelines.

1. Place on stable, level surface (table, desk, nightstand).
2. Keep away from edges where it could be knocked over.
3. Ensure cord is not pinched or under tension.
4. Do not place near water sources (sinks, baths) or high heat.
5. Use for ambient lighting; not intended as primary task light.

Tip: Position shade to direct light as desired.

Safety Information

Read all safety instructions before use.

• Use only with specified bulb type and wattage.
• Unplug before cleaning, maintenance, or bulb replacement.
• Do not use if cord or plug is damaged.
• Keep out of reach of children and pets.
• Do not cover lamp or shade during operation.
• Not for outdoor use.

CAUTION! Risk of electric shock or fire if misused.

Care & Cleaning

Unplug lamp before cleaning.

1. Fabric shade: Use soft brush or vacuum with brush attachment to remove dust.
2. Base and socket: Wipe with dry or slightly damp cloth. Do not use abrasive cleaners.
3. Cord: Wipe with dry cloth.

CAUTION! Do not immerse in water. Do not use harsh chemicals.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or receipt for details.

For product support, assembly help, or spare parts:

• Visit: www.ikea.com
• Contact IKEA customer service: 1-888-888-4532
• Reference model number: VINDKAST 305.392.11

Troubleshooting

Disposal: Dispose of according to local regulations. Recycle where possible.

Service: For issues not resolved above, contact IKEA customer service.