IKEA VINDÖGA 605.536.96 Lighting instructions manual

The IKEA VINDÖGA 605.536.96 is a modern LED lighting solution designed for indoor use, featuring energy-efficient LED technology, adjustable brightness levels, multiple color temperature settings, and a sleek Scandinavian design. It includes a remote control for convenient operation, a wall mount bracket, and is compatible with standard household voltage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Remote Control Operation 8. Smart Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED light panel, Remote Control, Wall mount bracket, Power adapter, Mounting screws.

FeatureDescription
LED PanelEnergy-efficient LED array with long lifespan
Remote ControlWireless control for on/off, brightness, and color temperature
Wall Mount BracketFor secure mounting on walls
Power AdapterConverts AC power to DC for LED operation
Brightness ControlAdjustable from 10% to 100% intensity
Color TemperatureSwitch between Warm White (3000K), Neutral White (4000K), and Cool White (6000K)
Timer FunctionAuto-off timer settings (30 min, 60 min, 120 min)
Memory FunctionRemembers last brightness and color temperature setting
Low Voltage OperationSafe for indoor use
Slim DesignMinimalist Scandinavian design

Installation

Unpack and inspect contents. Ensure all parts are present.

  1. Choose mounting location: Select a clean, dry wall surface away from direct heat or moisture.
  2. Mount bracket: Use included screws to secure wall bracket to wall at desired height.
  3. Attach light panel: Align light panel with bracket and slide into place until it clicks securely.
  4. Connect power: Plug power adapter into wall outlet, then connect DC plug to light panel input.

WARNING! Ensure power is disconnected during installation. Do not mount near water sources. Use appropriate wall anchors for your wall type.

First-Time Setup

After installation, power on the light for initial setup.

  1. Power connection: Ensure power adapter is properly connected to both light panel and wall outlet.
  2. Remote control setup: Insert 2 AAA batteries into remote control (included).
  3. Test functions: Press power button on remote to turn light on/off.
  4. Adjust settings: Use remote to set preferred brightness and color temperature.

CAUTION! Do not look directly at LED light at close range. Ensure proper ventilation around light panel.

Specifications

Controls and Settings

Primary control via included remote control. No physical buttons on light panel.

Remote Control Functions: POWER ON/OFF, Brightness +/-, Color Temperature (3 settings), Timer (30/60/120 min), Memory Recall.

Brightness Control: Adjust from minimum (10%) to maximum (100%) in smooth increments. Color Temperature: Cycle through Warm White (3000K), Neutral White (4000K), Cool White (6000K). Timer Settings: Auto-off after selected time period. Memory Function: Automatically recalls last used brightness and color temperature when powered on.

Connecting to Power

Use only included power adapter. Do not use with other power sources.

  1. Ensure light is turned off via remote before connecting power.
  2. Connect DC plug to light panel input port (fits only one direction).
  3. Plug power adapter into standard wall outlet (100-240V AC).
  4. Power on using remote control.

Tip: Use a surge protector for added safety. Ensure power outlet is easily accessible.

Remote Control Operation

Remote control requires line-of-sight to light panel's IR receiver.

  1. Power: Press to turn light on/off.
  2. Brightness: Use +/- buttons to adjust light intensity.
  3. Color Temperature: Press to cycle through three color settings.
  4. Timer: Press to set auto-off timer (30/60/120 minutes).
  5. Memory: Press to restore factory default settings.

WARNING! Keep remote control away from water and extreme temperatures. Replace batteries when control becomes unresponsive.

Smart Features

Memory Function: Remembers last brightness and color temperature setting when powered off and on. Timer Function: Automatically turns light off after selected time period (useful for bedtime reading). Energy Saving: Automatically reduces brightness to 50% after 4 hours of continuous operation (can be disabled).

Care & Cleaning

Disconnect from power before cleaning. Use soft, dry cloth only. Do not use liquid cleaners or abrasive materials.

CAUTION! Do not spray any liquids on light panel. Do not use chemical cleaners. Avoid scratching the LED surface.

Regulatory Information

CE Certified: Complies with European safety standards. RoHS Compliant: Free of hazardous substances. Energy Class: A+ (EU Energy Label). Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Recycle according to local regulations. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

SymptomPossible CauseCorrective Action
Light does not turn onPower connection/remote batteriesCheck power adapter connections; replace remote batteries; ensure remote pointed at IR receiver.
Flickering lightLoose connection/power issueCheck all connections; try different power outlet; ensure using included power adapter.
Remote not workingBatteries/obstructionsReplace batteries; ensure line-of-sight to light panel; remove obstacles.
Light too dimBrightness settingAdjust brightness using remote; check if timer or energy saving mode is active.
Color temperature not changingRemote functionPress color temperature button repeatedly to cycle through options; replace remote batteries.
Timer not workingSetting errorRe-set timer function; ensure correct button sequence.

Reset: Press and hold Memory button on remote for 5 seconds to restore factory settings.

Service: Contact IKEA customer service or visit www.ikea.com for warranty claims.

IKEA VINDÖGA 605.536.96 Lighting instructions manual © - All Rights Reserved 2025