IKEA VIMMERN 103.052.89 Faucet instructions manual

The IKEA VIMMERN 103.052.89 is a single-handle kitchen faucet designed for easy installation and operation. It features a pull-out spray head with multiple spray patterns, a durable ceramic disc cartridge for smooth handle control and drip-free performance, a high-arc spout for ample sink clearance, and a brushed nickel or chrome finish. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup & Operation 4. Specifications 5. Controls and Functions 6. Connecting to Water Supply 7. Using the Spray Head 8. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Faucet body with single handle, Pull-out spray head with hose, Mounting hardware, Ceramic disc cartridge, Aerator.

Feature	Description
Single-handle control	Lever controls both water temperature and flow rate
Pull-out spray head	Extendable hose with spray/stream function
Ceramic disc cartridge	Ensures smooth operation and prevents leaks
High-arc spout	Provides clearance for large pots and pans
Durable finish	Brushed nickel or chrome for corrosion resistance
Quick-connect fittings	For simplified installation to water supply lines
Weighted hose	Helps retract the spray head back into place
Aerator	Reduces splashing and conserves water
Mounting hardware	Includes base plate, nuts, and washers for secure installation
Hose length	Approximately [Specify length, e.g., 1.5m] for flexible reach

Installation

Unpack and inspect all contents. Ensure you have the necessary tools (adjustable wrench, plumber's tape, bucket).

Prepare the sink: Ensure the mounting hole is clean and clear (standard 1-3/8" or 35mm diameter).
Connect supply lines: Attach flexible hoses to hot and cold water valves using plumber's tape on threads.
Mount the faucet: Insert the faucet through the sink hole, secure from below with mounting hardware.
Connect spray hose: Attach the pull-out hose to the faucet body and water supply lines.
Test for leaks: Turn on water supply slowly and check all connections before final tightening.

WARNING! Shut off main water supply before installation. Do not overtighten connections. Ensure all seals and washers are properly positioned.

First-Time Setup & Operation

After installation, perform initial checks and familiarize yourself with operation.

Check water flow: Move handle from left to right to adjust temperature, lift to increase flow.
Test spray head: Pull out the spray head, press the button to switch between stream and spray modes.
Adjust hose retraction: Ensure the weighted hose retracts smoothly; adjust if necessary.
Set preferred temperature: Mark or note handle position for your preferred warm water setting.

CAUTION! Test water temperature with hand before use to avoid scalding. Ensure spray head retracts fully to avoid hose damage.

Specifications

Model: VIMMERN 103.052.89
Type: Single-handle kitchen faucet with pull-out spray
Spout Height: Approximately [Specify, e.g., 10 inches] from base
Spout Reach: Approximately [Specify, e.g., 9 inches] from center
Finish: Brushed nickel / Chrome
Valve: Ceramic disc cartridge
Hose Length: [Specify, e.g., 1.5 meters]
Mounting: Single hole (35mm standard)
Water Pressure: Operates with standard household pressure (20-80 psi)
Compliance: Meets applicable plumbing codes and standards

Controls and Functions

Handle: Left for cold, right for hot, middle for mixed. Lift to increase flow, push down to shut off.

Spray Head Functions: Pull out to extend. Button on spray head toggles between: - Stream: Solid flow for filling containers. - Spray: Wider, softer pattern for rinsing.

Aerator: Screws onto spout tip to mix air with water, reducing splashing and saving water. Clean periodically if flow decreases.

Connecting to Water Supply

Use included flexible hoses with quick-connect fittings.

Shut off hot and cold water valves under sink.
Wrap plumber's tape clockwise on valve threads.
Hand-tighten hoses onto valves, then use wrench for a quarter turn more – do not overtighten.
Connect other ends to corresponding inlets on faucet (marked H/C).
Turn water supply back on slowly and check for leaks at all connections.

Tip: Have a bucket ready to catch any residual water when disconnecting old faucet or during testing.

Using the Spray Head

The pull-out spray head provides flexibility for cleaning the entire sink.

To extend: Simply pull the spray head from its dock on the faucet spout.
To switch modes: Press the button on the spray head while water is flowing.
To retract: Gently guide the hose back; the weighted hose should retract it automatically.
For difficult reaches: The hose length allows you to rinse corners and large items easily.

WARNING! Do not pull the hose forcefully or let it hang over the sink edge when extended, as this can damage the hose or connections. Ensure retraction path is clear.

Care & Cleaning

Regular cleaning maintains appearance and function.

Use a soft, damp cloth with mild soap to clean the faucet surface. Dry immediately.
For mineral deposits: Use a vinegar-water solution (50/50) on a cloth; do not use abrasive cleaners or pads.
Aerator cleaning: Unscrew aerator periodically, rinse to remove debris, and reinstall.
Spray head nozzle: If clogged, soak in vinegar solution and use a soft brush to clear holes.

CAUTION! Do not use harsh chemicals, abrasive cleaners, or scouring pads, as they can damage the finish. Never use chlorine bleach on or near the faucet.

Regulatory Information

This product complies with relevant plumbing standards and codes. It is certified for potable water use. The finish is designed to resist corrosion under normal household conditions. For warranty information and support, visit www.ikea.com or contact IKEA customer service. IKEA and VIMMERN are trademarks of Inter IKEA Systems B.V.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Low water pressure	Clogged aerator or supply valve partially closed	Clean aerator; ensure water valves are fully open.
Spray head not retracting	Hose kinked or weight obstructed	Check hose path for kinks; ensure weight moves freely under sink.
Leak around base	Loose mounting or seal failure	Tighten mounting nut; check seal under base plate.
Handle is stiff or hard to turn	Debris in cartridge or lack of lubrication	Contact IKEA support; may require cartridge replacement.
Water temperature fluctuates	Supply line issues or mixing valve problem	Check hot/cold water supply pressures; may require professional inspection.
Spray pattern uneven or dripping	Debris in spray head nozzle	Soak spray head in vinegar solution and clean nozzles with soft brush.

Note: For internal repairs (e.g., cartridge replacement), refer to IKEA documentation or contact support.

Service: IKEA customer support: Visit www.ikea.com or your local IKEA store.