IKEA VIHALS 294.406.16 Cabinet instructions manual

The IKEA VIHALS 294.406.16 is a versatile cabinet designed for storage and organization. This manual provides essential information for safe assembly, installation, use, and maintenance of your cabinet. Below are key sections covering safety warnings, parts identification, assembly steps, installation guidelines, usage tips, care instructions, and troubleshooting.

1. Safety Information 2. Parts & Hardware 3. Assembly Instructions 4. Installation Guidelines 5. Usage & Features 6. Care & Maintenance 7. Troubleshooting 8. Specifications 9. Warranty & Support

Safety Information

Read all instructions before assembly. Ensure a safe environment.

Warning	Description
Tip-over hazard	Secure cabinet to wall using provided wall attachment device to prevent tipping.
Lifting injury	Cabinet is heavy; use two people for lifting and assembly.
Sharp edges	Handle parts with care; wear gloves if necessary.
Child safety	Keep small hardware away from children; do not let children climb on cabinet.
Surface stability	Place on a level, stable floor capable of supporting the weight.

Parts & Hardware

Unpack all contents and verify against parts list.

Main panels: Side panels (2), top panel (1), bottom panel (1), back panel (1), door(s) (1 or 2), shelves (as specified).
Hardware pack: Contains screws, cam locks, dowels, wall attachment device, Allen key.
Optional accessories: Drawer runners, handles (if included).

IMPORTANT! Do not discard any parts until assembly is complete. Check for damage before starting.

Assembly Instructions

Follow steps in order. Use provided tools.

Lay all parts on a soft, clean surface to prevent scratches.
Attach cam locks to side panels as indicated by pre-drilled holes.
Connect side panels to top and bottom panels using cam locks and dowels; tighten with Allen key.
Insert back panel into grooves; secure with provided screws.
Attach hinges to door(s) and then to side panels.
Install shelves by placing on shelf supports or using included pins.
Attach handles or knobs to door(s).
Install wall attachment device to back panel and secure to wall stud.

CAUTION! Do not overtighten screws; ensure all connections are snug but not forced.

Installation Guidelines

Location: Choose a dry, level area away from direct sunlight and heat sources.
Wall mounting: Mandatory. Use included wall attachment device and fix into wall studs using appropriate wall anchors if needed.
Leveling: Adjust feet (if applicable) to ensure cabinet is level.
Clearance: Allow space for doors to open fully (at least 90 degrees).

Tip: Use a stud finder to locate wall studs for secure mounting.

Usage & Features

Designed for general storage of books, media, or decorative items.

Feature	Description
Adjustable shelves	Shelves can be repositioned using shelf pins for flexible storage.
Door with hinge	Door opens smoothly; hinge tension can be adjusted with screwdriver if needed.
Wall attachment	Prevents tipping when drawers or doors are open or weight is applied.
Finish	Laminated surface; wipe clean with damp cloth.

WARNING! Do not exceed maximum load capacity of 55 lbs (25 kg) per shelf. Distribute weight evenly.

Care & Maintenance

Regular care ensures longevity.

Cleaning: Use a soft, damp cloth with mild detergent. Wipe dry immediately.
Avoid: Abrasive cleaners, scouring pads, solvents, or excessive water.
Inspection: Periodically check wall attachment and tighten screws if loose.
Door adjustment: If door sags or misaligns, adjust hinge screws with a screwdriver.

CAUTION! Never use steam cleaners or harsh chemicals on surfaces.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Door does not close properly	Hinge misaligned or loose	Tighten hinge screws; adjust door position.
Shelves sagging	Excessive weight	Reduce load; ensure weight is within limit and evenly distributed.
Cabinet wobbles	Uneven floor or loose assembly	Check level; adjust feet; tighten all cam locks and screws.
Difficulty assembling	Parts misidentified or reversed	Refer to diagram; ensure parts are oriented correctly.
Wall attachment loose	Not secured to stud or loose screw	Reattach into wall stud; use appropriate anchor; tighten screw.

Specifications

Model: VIHALS 294.406.16
Dimensions (HxWxD): 70.9" x 31.5" x 15.75" (180 cm x 80 cm x 40 cm)
Material: Particleboard, fiberboard, plastic, steel hardware
Finish: White laminate
Weight: 88 lbs (40 kg) approx.
Max load per shelf: 55 lbs (25 kg)
Tools required: Allen key (included), screwdriver (not included), hammer (for wall anchors if needed)

Warranty & Support

IKEA limited warranty applies. See warranty card for details.

Support: For missing parts or assembly help, contact IKEA customer service or visit www.ikea.com. Have model number (294.406.16) and purchase receipt ready.

Recycling: Dispose of packaging responsibly. Cabinet can be disassembled for recycling; check local regulations.