IKEA VICKLEBY 404.844.87 Floor Lamp instructions manual

The IKEA VICKLEBY 404.844.87 is a modern floor lamp featuring a metal base, adjustable height, fabric shade, and energy-efficient LED bulb compatibility. Designed for easy assembly and versatile placement in living rooms, bedrooms, or offices. Below are key sections for safety, parts list, assembly instructions, operation, care, and troubleshooting.

1. Parts List & Tools Needed 2. Safety Instructions 3. Assembly Steps 4. Specifications 5. Lamp Operation 6. Bulb Replacement 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts List & Tools Needed

All parts included in the package. Check contents before assembly.

Part Number	Description	Quantity
1	Base plate (metal)	1
2	Lower tube section	1
3	Upper tube section	1
4	Fabric shade	1
5	Shade holder ring	1
6	Socket assembly with switch	1
7	LED bulb (E26 base, 9W, 800 lumens)	1
8	Screws and fasteners	Set
9	Allen key (included)	1

Tools needed: No additional tools required (Allen key included).

Safety Instructions

Read all instructions before assembly and use.

Electrical Safety: Unplug lamp before assembly, cleaning, or bulb replacement.
Bulb Compatibility: Use only LED bulbs with E26 base, max 13W (included).
Placement: Place on stable, level surface away from heat sources and water.
Cord Management: Keep cord away from foot traffic to prevent tripping.
Children: Supervise children near lamp; small parts are a choking hazard.

WARNING! Do not use incandescent bulbs exceeding 13W to avoid overheating.

Assembly Steps

Estimated assembly time: 15-20 minutes.

Attach Base: Place base plate on flat surface. Insert lower tube into base and secure with provided screw using Allen key.
Connect Tubes: Slide upper tube into lower tube. Align holes and secure with locking pin (click sound confirms).
Install Socket: Thread socket assembly onto top of upper tube. Tighten by hand (do not over-tighten).
Attach Shade: Place fabric shade over socket. Secure with shade holder ring by twisting clockwise until snug.
Insert Bulb: Screw included LED bulb into socket (E26 base). Do not touch bulb with bare hands.
Cord Setup: Route power cord through tube channels and out base opening. Plug into wall outlet.

Tip: Ensure all connections are tight to prevent wobbling.

Specifications

Model: VICKLEBY 404.844.87
Height: Adjustable from 48" to 60" (122-152 cm)
Base Diameter: 9.8" (25 cm)
Shade Material: Polyester fabric (light gray)
Frame Material: Powder-coated steel (black)
Bulb Type: LED, E26 base, 9W (included), 2700K warm white
Max Wattage: 13W LED equivalent
Cord Length: 6.5 ft (2 m)
Voltage: 120V AC, 60Hz (for US/Canada)
Weight: 5.5 lbs (2.5 kg) assembled

Lamp Operation

Simple on/off operation with integrated switch.

Power On: Plug cord into wall outlet. Ensure switch on socket is in OFF position.
Turn On: Flip switch on socket upward (ON position). Lamp should illuminate.
Adjust Height: Loosen locking knob on lower tube, slide upper tube to desired height, retighten knob.
Turn Off: Flip switch downward (OFF position). Unplug when not in use for extended periods.

Note: Lamp does not have dimming function unless used with compatible dimmer switch and dimmable LED bulb.

Bulb Replacement

Replace bulb only with compatible LED, E26 base, max 13W.

Unplug lamp and allow bulb to cool completely (if recently used).
Gently grip fabric shade and lift upward to remove from holder ring.
Unscrew old bulb counterclockwise. Avoid touching new bulb with bare hands (use cloth).
Screw new bulb clockwise until snug (do not over-tighten).
Replace shade by aligning with ring and pressing down until secure.
Plug in lamp and test.

CAUTION! Never use bulbs exceeding recommended wattage to prevent fire hazard.

Care & Maintenance

Regular care ensures longevity and appearance.

Cleaning: Unplug lamp. Wipe metal parts with dry, soft cloth. For fabric shade, use vacuum with brush attachment or lint roller.
Stains: Spot clean shade with mild soap and damp cloth; air dry completely before use.
Storage: Disassemble if storing long-term. Keep in dry place away from moisture.

WARNING! Do not immerse lamp in water or use abrasive cleaners.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power/bulb issue	Check outlet; ensure plug is secure; replace bulb; verify switch is ON.
Flickering light	Loose bulb or incompatible bulb	Tighten bulb; ensure bulb is LED, max 13W; try different outlet.
Lamp wobbles	Uneven surface/loose assembly	Place on level floor; tighten all screws and locking knobs.
Shade not staying	Holder ring not secure	Remove shade and reattach, twisting ring clockwise until snug.
Overheating	Wrong bulb wattage	Immediately unplug; replace with correct LED bulb (max 13W).

Warranty & Support

IKEA limited warranty: 1 year from date of purchase against manufacturing defects. Keep receipt for warranty claims.

Support: For missing parts or assembly help, contact IKEA customer service:

Phone: 1-888-888-4532 (US) or 1-866-866-4532 (Canada)
Website: www.ikea.com
In-store: Visit IKEA returns desk with receipt and product.

Recycling: Dispose of packaging responsibly. Recycle bulb at approved electronics recycling center.