IKEA VASSHOLMEN 305.037.40 Chair instructions manual

The IKEA VASSHOLMEN 305.037.40 is an outdoor chair designed for durability and comfort. It features a powder-coated steel frame for weather resistance, a seat and back made from synthetic rattan for a classic look and easy maintenance, and a stackable design for convenient storage. Suitable for patios, balconies, and gardens. Below are key sections for safety, assembly, care, usage, and warranty information.

1. Product Overview & Features 2. Safety Instructions 3. Parts & Tools Included 4. Assembly Instructions 5. Care & Maintenance 6. Usage Guidelines 7. Specifications 8. Troubleshooting 9. Warranty & Support

Product Overview & Features

Key components: Powder-coated steel frame, Synthetic rattan seat and backrest, Plastic feet caps.

Feature	Description
Frame Material	Powder-coated steel for durability and rust resistance
Seat & Back Material	Woven synthetic rattan (polyethylene) for outdoor use
Design	Stackable for space-saving storage
Weight Capacity	Max. load: 110 kg / 243 lbs
Feet	Plastic caps to protect floors and surfaces
Intended Use	Outdoor use on patios, balconies, gardens
Color	Black frame with dark brown synthetic rattan

Safety Instructions

Read all instructions before assembly and use.

Assembly: Assemble on a soft surface to avoid scratching parts. Keep children away during assembly.
Usage: Do not exceed the maximum weight limit of 110 kg (243 lbs).
Stability: Ensure all parts are securely tightened. Check tightness periodically.
Outdoor Use: Designed for outdoor use but prolonged exposure to extreme weather may affect longevity. Store indoors during harsh winter conditions if possible.

WARNING! Chair is heavy; lift with care to avoid injury. Do not stand on the chair.

Parts & Tools Included

Check that all parts are present before starting assembly.

Frame Parts: Front legs/seat support (1), Back legs/back support (1), Side frames (2).
Seat & Back: Pre-woven synthetic rattan seat panel (1), Pre-woven synthetic rattan back panel (1).
Hardware: Screws (quantity as per manual), Plastic caps/plugs.
Tools Provided: Allen key (hex key) included in package.

Note: Some parts may be pre-assembled. Refer to the numbered diagram in the paper manual.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Follow steps in order.

Prepare: Unpack all parts and lay them on a clean, soft surface (e.g., carpet).
Attach Side Frames: Connect the left and right side frames to the front leg/seat support unit using the provided screws and Allen key. Do not fully tighten yet.
Attach Back Support: Connect the back legs/back support unit to the side frames. Ensure all alignment holes match.
Tighten All Screws: Once the frame is square and all parts are aligned, fully tighten all screws securely with the Allen key.
Attach Seat Panel: Place the pre-woven seat panel onto the frame. It should click or rest securely into place on the supports.
Attach Back Panel: Place the pre-woven back panel onto the back support frame. Secure it according to the manual (may use screws or clips).
Attach Foot Caps: Press the plastic protective caps onto the bottom of each leg.
Final Check: Ensure the chair is stable, all parts are secure, and there are no sharp edges or protruding screws.

Tip: Two people may make assembly easier.

Care & Maintenance

Regular care will prolong the life of your chair.

Cleaning Frame: Wipe with a soft, damp cloth. Use mild soapy water if needed. Dry thoroughly. Do not use abrasive cleaners or solvents.
Cleaning Rattan: Clean synthetic rattan with a soft brush or cloth and mild soapy water. Rinse with clean water and allow to air dry completely.
Storage: For long-term storage or during winter, store in a dry, covered place. Chairs can be stacked to save space.
Inspection: Periodically check and tighten screws if they become loose.

CAUTION! Do not use pressure washers or harsh chemicals as they can damage the materials.

Usage Guidelines

For optimal performance and safety.

Use only on stable, level surfaces.
Do not drag the chair; lift it to move.
The chair is designed for seating only. Do not stand, kneel, or jump on it.
Stack chairs carefully, ensuring they are clean and dry before stacking to prevent scratching.
Keep away from direct heat sources like fire pits or grills.

Specifications

Article Number: 305.037.40
Dimensions (assembled): Width: 54 cm, Depth: 60 cm, Height: 83 cm, Seat Height: 46 cm.
Weight: Approx. 6.5 kg
Max Load: 110 kg / 243 lbs
Material Frame: Steel, Epoxy/polyester powder coating
Material Seat/Back: Polyethylene rattan, Polypropylene
Color: Black/Brown
Packaging: Flat-pack. Package dimensions and weight vary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chair feels wobbly	Screws not fully tightened	Check and tighten all screws with the Allen key.
Rattan seat/back is loose	Not properly clipped or secured	Re-seat the panel according to assembly step 5/6. Ensure it clicks into place.
Scratches on floor	Protective foot caps missing or damaged	Attach or replace the plastic foot caps on each leg.
Rust spots on frame	Coating damaged, prolonged moisture	Clean area, dry thoroughly. Touch up with matching outdoor paint to prevent spread.
Difficulty stacking	Chairs not aligned, debris on surfaces	Clean chairs, stack gently by aligning the backrests and legs.

Warranty & Support

IKEA products come with a warranty. Refer to the IKEA guarantee for terms and duration specific to your country.

Replacement Parts: For missing or defective parts, contact your local IKEA store with the article number (305.037.40) and proof of purchase.

Support: For assembly help or other questions, visit the IKEA website (www.ikea.com) or contact your local IKEA customer service.

Important: Retain your receipt as proof of purchase for warranty claims.