IKEA VARMBLIXT 005.315.32 Wall Lamp instructions manual

The IKEA VARMBLIXT 005.315.32 is a decorative wall lamp designed to provide ambient lighting. It features a unique, sculptural design, is intended for indoor use, and operates with a standard E14 bulb (max 6W LED recommended). Below are key sections for safety, features, installation, setup, operation, and care.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Wall-mounted lamp shade, mounting bracket, screws/plugs, and bulb socket.

Feature	Description
Design	Sculptural, decorative shade for ambient light diffusion
Bulb Socket	E14 (small Edison screw)
Recommended Bulb	Max 6W LED or equivalent energy-saving bulb
Mounting	Fixed wall mounting with included hardware
Material	Plastic/Polymers (shade), Metal (bracket)
Intended Use	Indoor residential use only

Installation

Unpack and inspect all parts. Ensure you have the correct tools (screwdriver, drill, wall plugs if not suitable for wall type).

Choose location: Select a suitable wall area near a power source. Ensure wall can support weight.
Mark holes: Use the mounting bracket as a template to mark screw holes on the wall.
Drill holes: Drill holes at marked points and insert the provided wall plugs (if needed for your wall type).
Attach bracket: Secure the mounting bracket to the wall using the provided screws.
Wire connection: IMPORTANT: Turn off power at the circuit breaker. Connect the lamp wires to your household wiring (Live, Neutral, Earth) as per local electrical codes. If unsure, consult a qualified electrician.
Attach shade: Clip or screw the lamp shade onto the mounted bracket as per design.
Insert bulb: Screw in an E14 bulb (max 6W LED recommended).

WARNING! Electricity is dangerous. Installation should be performed by a competent person if you are not confident. Ensure power is OFF during installation.

First-Time Setup

After installation, restore power and test the lamp.

Power on: Turn the power back on at the circuit breaker.
Switch on: Use the wall switch or inline cord switch (if part of your setup) to turn on the lamp.
Check operation: Verify the bulb illuminates correctly.
Adjustment: Ensure the shade is securely attached and positioned as desired.

CAUTION! Do not touch the bulb when it is on or immediately after turning off, as it may be hot. Allow to cool before handling.

Specifications

Product Name: VARMBLIXT
Article Number: 005.315.32
Bulb Base: E14
Max Wattage: 6W LED recommended (check local regulations for max allowed)
Voltage: 220-240V (or as per regional variant, e.g., 120V for North America)
Frequency: 50/60 Hz
Dimensions: (Approx.) Please refer to IKEA packaging or website for exact dimensions.
Weight: (Approx.) Please refer to IKEA packaging.
IP Rating: Not rated for damp/wet locations (Indoor use only).

Controls and Settings

This is a fixed lamp with no built-in controls. Operation is solely via the connected wall switch or power outlet switch.

Light Adjustment: The light output and ambiance can only be adjusted by changing the bulb type (e.g., warm white vs cool white LED) or using a dimmable bulb in conjunction with an external dimmer switch installed on the circuit. Ensure any external dimmer is compatible with LED bulbs if used.

Connecting to Power

The lamp must be connected to a standard household electrical circuit.

Always turn off the mains power before any electrical work.
Connect wires: Follow color codes (Brown/Live, Blue/Neutral, Green-Yellow/Earth) or local standards.
Secure connections: Use appropriate wire connectors (not included).
No plug: This unit is typically hardwired. For plug-in variants, connect to a properly rated socket.

Tip: Use a voltage tester to confirm power is off before touching wires.

Operation

Simple on/off operation via your wall switch.

To turn on: Flip the connected wall switch to the ON position.
To turn off: Flip the switch to the OFF position.
Bulb replacement: Ensure lamp is off and cool. Unscrew old bulb, screw in new E14 bulb (max 6W LED).

WARNING! Do not exceed the maximum recommended wattage. Using a higher wattage bulb may cause overheating and damage the lamp or create a fire hazard.

Care & Cleaning

Always turn off and disconnect power before cleaning.

Dust regularly: Use a soft, dry cloth or a feather duster to remove dust from the shade and bracket.
For marks: Use a slightly damp cloth with mild soap if necessary. Wipe dry immediately.
Do not immerse any part of the fixture in water or other liquids.

CAUTION! Do not use abrasive cleaners, solvents, or chemical cleaners as they may damage the finish.

Regulatory Information

This product complies with applicable EU directives and standards for electrical safety and electromagnetic compatibility. For EU: Conforms to Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU. The symbol of the crossed-out wheeled bin indicates separate collection of waste electrical equipment (WEEE). Dispose of according to local regulations. © Inter IKEA Systems B.V.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power off / Bulb faulty / Loose connection	Check wall switch and circuit breaker. Replace bulb. Ensure power is connected securely.
Lamp flickers	Loose bulb / Incompatible dimmer / Faulty bulb	Tighten bulb. Remove dimmer or use a compatible dimmable LED bulb. Try a new bulb.
Overheating	Bulb wattage too high	Immediately turn off. Replace with a bulb of the correct type and max 6W LED.
Shade is loose	Not properly attached to bracket	Turn off power. Check attachment mechanism and secure properly.
Buzzing sound	Incompatible transformer (for low voltage) / Faulty ballast (not applicable for LED) / Cheap magnetic dimmer	Ensure correct bulb type for mains voltage. If using a dimmer, ensure it's compatible with LED bulbs.

Safety First: If problems persist, disconnect from power and consult the retailer or a qualified electrician.

IKEA Support: Visit www.ikea.com or contact your local IKEA store for spare parts or advice.