IKEA VAPPEBY 205.176.05 Bluetooth Speaker instructions manual

The IKEA VAPPEBY 205.176.05 is a portable Bluetooth speaker designed for wireless audio streaming. It features Bluetooth connectivity, a built-in rechargeable battery, an AUX-in port for wired connections, a power button, volume controls, and a USB-C charging port. Below are key sections for safety, features, setup, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. First-Time Setup 4. Specifications 5. Controls and Indicators 6. Connecting to Devices 7. Charging the Speaker 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable speaker unit, USB-C charging cable, user manual.

Feature	Description
Bluetooth	Wireless audio streaming from compatible devices
Rechargeable Battery	Built-in lithium-ion battery for portable use
USB-C Charging Port	For charging the internal battery
AUX-in Port (3.5mm)	For wired audio connection
Power Button	Turns the speaker on/off
Volume Controls	Buttons to increase/decrease volume
Bluetooth Pairing Button	Initiates pairing mode
LED Indicator	Shows power, pairing, and battery status
Compact Design	Portable and lightweight for easy carrying
Water Resistance	Splash-resistant design (check specific IP rating)

Package Contents

Unpack and inspect all contents. Ensure nothing is missing or damaged.

IKEA VAPPEBY Bluetooth Speaker (1 unit).
USB-C Charging Cable (1 piece).
Quick Start Guide / User Manual (this document).

WARNING! Keep plastic bags away from children to avoid suffocation hazard. Retain packaging for future transport or service.

First-Time Setup

Prepare your speaker for first use.

Charge the speaker: Connect the USB-C cable to the speaker and a USB power adapter (not included) or computer. The LED will indicate charging status.
Power on: Press and hold the Power button until the LED lights up. You will hear a startup sound.
Pair with a device: Press the Bluetooth pairing button. The LED will blink rapidly. On your phone/tablet/computer, enable Bluetooth, search for "VAPPEBY", and select it to connect.
For wired connection: Connect a 3.5mm audio cable (not included) from the AUX-in port on the speaker to your device's headphone jack.

CAUTION! Use only the provided USB-C cable or a certified equivalent. Do not use damaged cables.

Specifications

Model: VAPPEBY 205.176.05
Connectivity: Bluetooth (version as per model), 3.5mm AUX input.
Battery: Rechargeable lithium-ion.
Charging: USB-C port.
Playback Time: Up to [X] hours on a full charge (varies with volume).
Charging Time: Approximately [Y] hours to full charge.
Driver: Full-range speaker unit.
Water Resistance: IPX4 (Splash resistant - check specific model rating).
Operating Range: Bluetooth range up to 10 meters (33 feet) in open space.
Weight & Dimensions: Compact and lightweight design for portability.

Controls and Indicators

Locate the controls on the speaker body.

Buttons: Power (On/Off), Bluetooth Pairing, Volume Up (+), Volume Down (-).

Ports: USB-C (charging), AUX-in (3.5mm audio input).

LED Indicator Patterns: - Solid light: Power on. - Slow blinking: Battery low. - Fast blinking: Bluetooth pairing mode active. - Pulsing/breathing: Connected via Bluetooth and playing audio. - Solid red (while plugged in): Charging. - Solid green/off (while plugged in): Fully charged.

Connecting to Devices

Wireless (Bluetooth) and Wired (AUX) methods.

Bluetooth Pairing: Ensure speaker is on. Press Bluetooth button to enter pairing mode (LED blinks fast). On your source device, go to Bluetooth settings, find "VAPPEBY", and tap to connect. You will hear a confirmation sound.
Reconnecting: The speaker will usually automatically reconnect to the last paired device when powered on if that device's Bluetooth is on and in range.
Wired Connection: Connect a 3.5mm audio cable from your device's headphone/audio output to the speaker's AUX-in port. The speaker will automatically switch to AUX input mode.

Tip: For best Bluetooth performance, keep the speaker and source device within 10 meters without major obstructions.

Charging the Speaker

Use the provided USB-C cable.

Connect the USB-C end to the charging port on the speaker.
Connect the USB-A end to a standard USB power adapter (5V/1A or greater recommended) or a computer USB port.
The LED will typically glow red to indicate charging.
When fully charged, the LED may turn green or turn off (behavior varies by model).
Disconnect the cable once charging is complete.

WARNING! Do not charge the speaker near heat sources or in direct sunlight. Do not attempt to disassemble the battery. Use only approved chargers.

Care & Maintenance

Unplug the charging cable before cleaning. Use a soft, slightly damp cloth to wipe the exterior. Do not immerse in water.

CAUTION! Do not use abrasive cleaners, solvents, or chemicals. Although splash-resistant, avoid direct water jets or submersion. Do not expose to extreme temperatures.

Regulatory Information

This device complies with relevant radio equipment and safety standards. Contains a rechargeable lithium-ion battery; dispose of according to local regulations. For EU: This symbol indicates separate collection for electrical and electronic equipment. Copyright and trademarks are property of Inter IKEA Systems B.V. For more information, visit www.ikea.com or contact your local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Speaker won't turn on	Battery depleted	Connect to charger and allow to charge for at least 30 minutes before trying again.
Cannot pair via Bluetooth	Not in pairing mode / Device issue	Press and hold Bluetooth button until LED blinks rapidly. Ensure your source device's Bluetooth is on and searching. Move devices closer together.
No sound from speaker	Volume low / Wrong input / Muted	Check volume on both speaker and source device. Ensure correct input is selected (Bluetooth vs. AUX). Check if source device is muted.
Poor Bluetooth connection / Audio cuts out	Distance / Obstructions / Interference	Reduce distance between speaker and device. Remove physical obstructions. Move away from other wireless devices (Wi-Fi routers, microwaves).
Speaker not charging	Faulty cable/power source / Port debris	Try a different USB cable and power adapter. Ensure the USB-C port is clean and free of debris. Check the power outlet.
Distorted sound	Volume too high / Low battery	Reduce the volume level. Charge the speaker fully.

Reset: If problems persist, try resetting the speaker: Turn it off. Press and hold the Power and Bluetooth buttons together for 10 seconds. Then turn it on and try pairing again.

Service & Support: For warranty service or further assistance, contact your local IKEA store or visit www.ikea.com.