IKEA VADHOLMA 203.743.43 Storage instructions manual

The IKEA VADHOLMA 203.743.43 is a modular storage system designed for flexible organization in living spaces, home offices, or bedrooms. It features a sturdy metal frame, adjustable shelves, and optional door/drawer fronts for a customized look. Below are key sections for assembly, safety, installation, configuration, maintenance, and troubleshooting.

1. Product Overview & Features 2. Safety Information 3. Included Parts & Tools 4. Assembly Instructions 5. Installation & Placement 6. Configuration Options 7. Weight Limits & Capacity 8. Care & Maintenance 9. Disassembly & Moving 10. Warranty & Support 11. Troubleshooting

Product Overview & Features

Key components: Metal frame uprights and crossbars, adjustable shelf brackets, shelves (particleboard with foil finish), optional door/drawer fronts, wall anchoring kit.

Feature	Description
Modular Frame	Steel uprights and crossbars for customizable width and height
Adjustable Shelves	Brackets allow shelf height adjustment in 1-inch increments
Optional Fronts	Compatible with VADHOLMA door and drawer fronts (sold separately)
Wall Anchors	Included kit for securing unit to wall to prevent tipping
Finish Options	Available in black-brown or white stained oak veneer effect
Mounting Hardware	All screws, dowels, and brackets included
Tool-Free Adjustments	Shelves can be repositioned without tools after initial assembly
Load Capacity	Designed for typical household storage (see weight limits)

Safety Information

Read all instructions before assembly. Use proper lifting techniques.

Always secure unit to wall using provided anchors to prevent tipping, especially if children are present.
Do not exceed maximum weight limits per shelf (see specifications).
Assemble on a soft surface to avoid scratching components.
Keep small hardware away from children during assembly.

WARNING! Heavy items should be placed on lower shelves. Unit can tip if not properly anchored. Ensure all connections are tight.

Included Parts & Tools

Check contents against packing list before starting.

Frame uprights (4 pieces) – pre-drilled with holes for shelves.
Crossbars (variable number based on size) – connect uprights.
Shelf brackets (set of 8 or more) – clip into frame holes.
Shelves (particleboard) – rest on brackets.
Wall anchoring kit: brackets, screws, wall plugs.
Assembly hardware: screws, dowels, cam locks, wrench.
Instruction manual (this document).

CAUTION! Do not discard packing materials until assembly is complete and all parts are verified.

Assembly Instructions

Follow steps in order. Allow 60-90 minutes for assembly.

Step 1: Lay all parts on a clean, flat, padded surface.
Step 2: Connect uprights to crossbars using provided screws and cam locks. Tighten with wrench.
Step 3: Stand frame upright carefully, with assistance if needed.
Step 4: Insert shelf brackets into desired holes on uprights (click into place).
Step 5: Place shelves onto brackets, ensuring they are level and secure.
Step 6: Attach optional door/drawer fronts according to separate instructions if used.
Step 7: Secure unit to wall using anchoring kit (mandatory).

Installation & Placement

Choose location before assembly.

Place on even, stable floor. Use shims if floor is uneven.
Ensure adequate clearance for doors/drawers to open fully.
Keep away from direct heat sources or excessive humidity.
For wall mounting: Locate wall studs; use anchors if mounting into drywall.

Tip: Assemble unit near its final location to avoid moving fully assembled unit.

Configuration Options

Customize shelf layout for your needs.

Shelving: Adjust brackets to create spaces for books, bins, or display items. Brackets can be moved without tools after initial setup.

Doors/Drawers: Compatible VADHOLMA fronts (sold separately) attach with hinges or runners. Follow specific front instructions.

Combination Units: Multiple VADHOLMA units can be placed side-by-side. Ensure they are individually anchored to wall.

Weight Limits & Capacity

Max load per shelf: 66 lbs (30 kg) evenly distributed.
Total unit capacity: Varies by size; do not exceed 220 lbs (100 kg) for standard unit.
Drawer capacity (if equipped): 22 lbs (10 kg) per drawer.
Door loading: Do not hang heavy items on inside of doors unless designed for it.
Material: Particleboard shelves with foil finish; steel frame.
Environmental: For indoor use only in dry conditions.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

Dust regularly with soft, dry cloth.
For stains, use mild soap solution; wipe dry immediately.
Do not use wax, polish, or harsh chemicals on foil surfaces.
Tighten screws and check wall anchors annually.

CAUTION! Do not use wet cloth on unfinished edges or inside screw holes. Avoid prolonged moisture exposure.

Disassembly & Moving

To disassemble, reverse assembly steps.

Remove all items from shelves.
Detach optional fronts (doors/drawers) first.
Remove shelves, then brackets.
Unscrew crossbars from uprights.
Pack hardware in labeled bag for reassembly.
When reassembling, check all connections and re-anchor to wall.

WARNING! Unit is not designed for frequent disassembly/reassembly. Particleboard may weaken with repeated screw insertion.

Warranty & Support

IKEA limited warranty: 10 years for frame, 1 year for moving parts. Proof of purchase required.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Frame wobbles	Uneven floor or loose screws	Check floor level; tighten all frame connections and wall anchors.
Shelf sags	Overloaded or brackets not fully seated	Reduce weight; ensure brackets are clicked into holes completely.
Doors misaligned	Hinges loose or frame not square	Tighten hinge screws; adjust frame squareness during assembly.
Difficulty inserting brackets	Holes obstructed or misaligned	Clear holes of debris; align bracket pins with holes properly.
Scratches on finish	Assembly on hard surface	Assemble on carpet or cardboard; use touch-up pen (available separately).

Spare Parts: Available through IKEA customer service.

Service: www.ikea.com or local store for assistance.