IKEA UTTER 603.577.37 Table instructions manual
The IKEA UTTER 603.577.37 is a versatile table designed for home or office use, featuring a sturdy construction, easy assembly, and a modern aesthetic. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.
Parts and Tools Included
Before assembly, verify all parts are present. Key components: Tabletop, Legs, Screws, Cam Locks, Allen Key.
| Part Number | Description | Quantity |
| A | Tabletop | 1 |
| B | Table Leg | 4 |
| C | Cam Lock Screw | 8 |
| D | Cam Lock | 4 |
| E | Allen Key | 1 |
| F | Protective Felt Pads | 4 |
Safety Information
Read all instructions before assembly. Ensure a safe workspace.
- Assemble on a soft surface to avoid scratches.
- Use provided tools only; do not overtighten screws.
- Keep small parts away from children to prevent choking.
- Check stability after assembly; ensure all connections are secure.
WARNING! Table is heavy; lift with care to avoid injury. Do not stand or sit on the table.
Assembly Instructions
Follow steps in order; allow 30-45 minutes for assembly.
- Place tabletop upside down on a soft, flat surface.
- Attach legs: Align leg (B) with pre-drilled holes on tabletop (A).
- Insert cam lock screw (C) through leg into tabletop; hand-tighten.
- Insert cam lock (D) into slot on tabletop; turn clockwise with Allen key (E) to lock.
- Repeat for all four legs.
- Flip table upright; check stability.
- Attach protective felt pads (F) to bottom of each leg.
CAUTION! Do not overtighten screws; this may damage the material.
Specifications
- Model: UTTER 603.577.37
- Dimensions: 120cm (L) x 60cm (W) x 75cm (H)
- Material: Particleboard with melamine foil; Legs: Steel, epoxy/polyester powder coating
- Weight Capacity: Max load 50kg evenly distributed
- Color: White
- Packaging Weight: 15kg
- Recommended Use: Indoor use only
Care and Maintenance
Clean with a damp cloth; avoid abrasive cleaners.
- Wipe spills immediately with a soft, dry cloth.
- For stubborn stains, use mild soap and water; dry thoroughly.
- Do not place hot items directly on surface; use coasters or mats.
- Protect from direct sunlight and excessive moisture.
CAUTION! Do not use harsh chemicals, solvents, or abrasive pads.
Warranty Information
IKEA limited warranty: 10 years for tabletop and legs under normal domestic use.
- Coverage: Defects in material and workmanship.
- Exclusions: Damage from improper assembly, misuse, accidents, or commercial use.
- Claim Process: Contact IKEA customer service with proof of purchase.
- Support: Visit www.ikea.com or call 1-800-434-4532.
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
| Table wobbles | Uneven floor or loose legs | Check floor level; tighten all cam locks and screws. |
| Legs not aligning | Incorrect orientation | Ensure legs are oriented correctly (marked L/R). |
| Screw won't tighten | Stripped thread or misalignment | Do not force; realign hole and screw gently. |
| Surface stain | Liquid spill or heat mark | Clean as per care instructions; avoid heat sources. |
| Missing part | Packaging error | Contact IKEA customer service for replacement parts. |
Reassembly: If disassembling, keep all parts together; follow assembly steps in reverse.
Service: 1-800-434-4532; www.ikea.com
IKEA UTTER 603.577.37 Table instructions manual © - All Rights Reserved 2025