IKEA UTRUSTA 993.962.24 Shelf instructions manual

The IKEA UTRUSTA 993.962.24 is a versatile wall-mounted shelf system designed for storage and display. It features a clean, modern design, adjustable shelf heights, sturdy metal brackets, and solid wood or engineered wood shelves. Below are key sections for safety, parts list, tools required, assembly instructions, mounting guidelines, weight limits, care, and troubleshooting.

1. Parts Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Wall Mounting 6. Weight Capacity & Specifications 7. Adjusting Shelf Height 8. Care & Maintenance 9. Warranty Information 10. Troubleshooting

Parts Included

Check that all parts are present before starting assembly.

Part	Quantity	Description
Shelf board	2	Main shelf panels (wood/engineered wood)
Wall bracket	4	Metal L-shaped brackets for mounting
Screw pack	1 set	Wall anchors and screws for different wall types
Mounting template	1	Paper guide for bracket placement
Allen key	1	Tool for bracket adjustment
Instruction manual	1	This document

Tools Required

You will need the following tools (not included):

Drill with appropriate drill bits
Hammer (for wall anchors)
Level
Pencil
Tape measure
Screwdriver (Phillips head)

Note: Ensure tools are in good condition before use.

Safety Instructions

Read all instructions before assembly. Failure to follow may result in injury or damage.

Work with a partner: Shelves are heavy; use two people for lifting and mounting.
Check wall type: Identify if wall is drywall, plaster, concrete, or masonry. Use appropriate anchors.
Locate studs: For optimal support, mount brackets into wall studs where possible.
Keep children away: Ensure assembly area is clear of children and pets.
Wear safety gear: Consider safety glasses when drilling.

WARNING! Do not mount shelf above beds, sofas, or seating areas. Ensure wall can support the shelf's weight capacity.

Assembly Steps

Follow these steps in order for proper assembly.

Prepare brackets: Attach adjustable shelf supports to brackets using provided screws and Allen key.
Mark wall: Use mounting template and level to mark drill holes for brackets. Ensure marks are level and spaced correctly.
Drill holes: Drill holes at marked points using drill bit size recommended for your wall anchors.
Insert anchors: Tap wall anchors into holes gently with a hammer.
Mount brackets: Align brackets with holes, insert screws, and tighten securely with screwdriver.
Place shelves: Lift shelf boards onto brackets, ensuring they sit evenly and securely.
Final check: Gently test stability by applying light downward pressure.

Tip: Do not fully tighten screws until all brackets are positioned and leveled.

Wall Mounting

Proper mounting is critical for safety.

Stud mounting: Ideal method. Use stud finder to locate studs; attach brackets directly into studs with wood screws.
Drywall/plaster: Must use included hollow-wall anchors. Ensure anchors are rated for shelf's weight.
Concrete/brick: Use masonry drill bits and appropriate anchors (may need to purchase separately).
Spacing: Brackets should be mounted at least 16 inches apart for standard shelves, or as per template.

CAUTION! Never rely on drywall alone without proper anchors. Overloading or improper mounting can cause shelf to detach from wall.

Weight Capacity & Specifications

Max load per shelf: 33 lbs (15 kg) evenly distributed.
Total system capacity: 66 lbs (30 kg) for both shelves.
Dimensions: Each shelf: 31.5" L x 7.875" D x 1.5" H (80 cm x 20 cm x 3.8 cm).
Material: Shelf: Particleboard, foil; Bracket: Steel, epoxy/polyester powder coating.
Color: White.
Adjustable height range: 4" to 12" (10 cm to 30 cm) between shelves (bracket dependent).

Note: Do not exceed weight limits. Distribute weight evenly; avoid placing heavy items on one end.

Adjusting Shelf Height

Shelves can be repositioned on brackets for flexible storage.

Remove all items from shelf.
Lift shelf straight up off bracket supports.
Reposition bracket supports to desired height using Allen key.
Place shelf back onto supports, ensuring it clicks into place or sits securely.
Check level and stability.

Tip: Adjust both brackets to same height to keep shelf level.

Care & Maintenance

To keep your shelf in good condition:

Cleaning: Wipe with damp cloth and mild detergent. Dry immediately. Do not use abrasive cleaners.
Avoid moisture: Do not place in constantly damp areas. Wipe spills promptly.
Sunlight: Prolonged direct sunlight may cause fading.
Inspection: Periodically check tightness of screws and brackets. Retighten if loose.

CAUTION! Do not use harsh chemicals, ammonia, or scouring pads.

Warranty Information

IKEA limited warranty applies. See IKEA terms or receipt for details. Warranty covers material and manufacturing defects under normal household use. Does not cover damage from improper assembly, mounting, accidents, or modifications. For warranty service, contact IKEA customer service with proof of purchase.

Troubleshooting

Issue	Possible Cause	Solution
Shelf is not level	Uneven brackets or wall	Loosen bracket screws, adjust with level, retighten.
Brackets feel loose	Screws not tight or anchors not secure	Tighten screws. If anchor spins, remove and use larger anchor or different wall location.
Shelf wobbles	Uneven wall or brackets not aligned	Check bracket alignment; ensure both are mounted at same height and distance from wall.
Cannot drill into wall	Wrong drill bit or hitting obstruction	Use correct bit for wall material. Check for pipes/wires with stud finder.
Shelf sags under weight	Exceeds weight limit or weight uneven	Remove items. Redistribute weight evenly. Do not exceed 33 lbs per shelf.
Parts missing	Package incomplete	Contact IKEA customer service with product number (993.962.24) for replacement parts.

Support: For additional help, visit IKEA website or contact your local IKEA store.