IKEA UTRUSTA 094.182.11 Hinge instructions manual

The IKEA UTRUSTA 094.182.11 is a concealed hinge designed for kitchen cabinets and furniture, featuring adjustable settings in three dimensions (height, depth, and side-to-side) for precise door alignment. It is compatible with system holes of 35mm diameter and requires specific mounting plates. Below are key sections for safety, features, installation, adjustment, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Tools Required 4. Installation Steps 5. Adjustment Instructions 6. Compatibility & Specifications 7. Care & Maintenance 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: Hinge arm, mounting plate, adjustment screws, cup for door mounting.

Feature	Description
Concealed design	Hides inside cabinet for clean appearance
3-way adjustment	Height, depth, and side-to-side alignment
Soft-close function	Prevents slamming; ensures quiet closing
Mounting plate	Attaches to cabinet frame
35mm cup hole	Standard diameter for door drilling
Adjustment screws	For fine-tuning door position
Compatibility	Designed for IKEA UTRUSTA system cabinets
Material	Steel construction with nickel coating
Opening angle	Up to 110 degrees
Load capacity	Suitable for standard cabinet doors

Parts Included

Unpack and verify all components.

Hinge arm (with cup) – 1 piece.
Mounting plate – 1 piece.
Screws for mounting plate – 4 pieces.
Screws for hinge cup – 2 pieces.
Adjustment screws (integrated) – 3 types.

NOTE: Ensure all parts are present before starting installation.

Tools Required

Gather necessary tools before installation.

Drill with 35mm Forstner bit or hinge boring bit.
Screwdriver (Phillips #2) or cordless screwdriver.
Tape measure and pencil for marking.
Level for alignment check.
Clamps (optional) to hold door in place.

CAUTION! Use safety glasses when drilling.

Installation Steps

Follow steps in order for proper installation.

Prepare the door: Mark center for 35mm hole; drill to depth of 13mm.
Attach hinge cup: Insert hinge arm into hole; secure with provided screws.
Mount plate to cabinet: Position plate on cabinet frame; mark screw holes; drill pilot holes; attach plate.
Hang the door: Align hinge arm with mounting plate; click into place.
Initial tightening: Hand-tighten screws; do not fully tighten until adjustment is complete.

WARNING! Ensure door is supported during installation to prevent injury or damage.

Adjustment Instructions

Use adjustment screws for perfect alignment.

Height adjustment (vertical): Turn screw at top/bottom of hinge to move door up or down.

Depth adjustment (in/out): Turn screw at side of hinge to move door closer to or farther from cabinet frame.

Side-to-side adjustment (left/right): Turn screw at front of hinge to shift door horizontally.

Final check: Open and close door multiple times; ensure smooth operation and even gaps.

Compatibility & Specifications

Model: UTRUSTA 094.182.11
Type: Concealed hinge with soft-close
Drill hole: 35mm diameter, 13mm depth
Mounting plate: Requires 2 screws (included)
Adjustment range: ±2mm height, ±3mm depth, ±2mm side
Material: Steel, nickel-plated
Finish: Silver metallic
Weight capacity: Up to 4kg per hinge
Compatible with: IKEA UTRUSTA system cabinets and similar frames

Care & Maintenance

Clean with dry cloth only; avoid abrasive cleaners.

Lubrication: If hinge becomes stiff, apply small amount of silicone-based lubricant to moving parts.

Tightening: Periodically check screws for looseness; tighten as needed.

CAUTION! Do not use oil-based lubricants; they may attract dust.

Safety Information

Install on stable cabinets only. Keep children away during installation. Use appropriate personal protective equipment.

WARNING! Ensure door is properly secured before releasing support. Do not exceed weight limit.

Warranty & Support

IKEA limited warranty applies; see local store for details. For support, visit www.ikea.com or contact IKEA customer service.

NOTE: Warranty does not cover improper installation or misuse.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Door does not close smoothly	Misalignment or obstruction	Re-adjust height/depth screws; check for interference.
Hinge feels loose	Screws not tightened	Tighten all screws on hinge and mounting plate.
Soft-close not working	Damaged mechanism or overload	Check for defects; ensure door weight is within limit.
Door sags over time	Wear or screw loosening	Tighten screws; consider adding second hinge for support.
Hinge not clicking into plate	Misaligned plate or hinge	Loosen plate screws, realign, and retighten.

Replacement: If hinge is damaged, replace with identical model UTRUSTA 094.182.11.

Service: Contact IKEA customer service for further assistance.