IKEA UTRUSTA 090.406.76 Drawer Front instructions manual

The IKEA UTRUSTA 090.406.76 is a drawer front panel designed for compatibility with various IKEA kitchen and storage systems. It features a clean, modern design, pre-drilled mounting holes for standard IKEA drawer runners, and is constructed from durable, easy-to-clean materials. Below are key sections for overview, specifications, installation, compatibility, care, and warranty information.

1. Product Overview 2. Specifications 3. Installation Instructions 4. Compatibility Guide 5. Care & Maintenance 6. Safety Information 7. Troubleshooting 8. Warranty & Support

Product Overview

Key components: Drawer front panel, mounting brackets (if included), and installation hardware.

Component	Description
Drawer Front Panel	Main facade piece, available in various finishes
Mounting Brackets	Metal brackets for securing front to drawer box
Mounting Screws	Hardware for attachment (size may vary)
Adjustment Key	Tool for fine-tuning alignment (if included)

Specifications

Article Number: 090.406.76
Product Name: UTRUSTA
Type: Drawer Front
Dimensions (HxWxD): Refer to packaging or IKEA website for specific size.
Material: Particleboard, foil, ABS plastic edges (example materials; verify for specific product).
Finish: White, high-gloss (example; actual finish may vary).
Weight: Varies by size.
Pre-drilled Holes: Standard 32mm system for handle mounting and drawer runner attachment.

Installation Instructions

Installation requires a screwdriver. Ensure the drawer box is properly installed in the cabinet.

Prepare: Lay the drawer front face down on a soft, protected surface.
Attach Brackets: If not pre-attached, secure the mounting brackets to the back of the drawer front using the provided screws. Align them with the pre-drilled holes on the drawer box.
Align Front: Hold the drawer front against the drawer box, ensuring even gaps on all sides relative to the cabinet frame.
Secure: From inside the drawer box, screw through the mounting holes into the brackets on the back of the front panel. Do not overtighten.
Adjust: Use the adjustment screws on the brackets (if available) to fine-tune the vertical and horizontal alignment.
Attach Handle: If using a handle, align it with the pre-drilled holes on the front and secure it from the back with the provided hardware.

WARNING! Use appropriate personal protective equipment when handling tools. Ensure the cabinet and drawer runners are securely fixed to the wall/unit before installing heavy fronts.

Compatibility Guide

The UTRUSTA drawer front is designed for use with IKEA's METOD, SEKTION, or other compatible kitchen and storage systems. It is intended to be paired with standard IKEA drawer boxes (e.g., MAXIMERA, FORBATTRA).

Verify the drawer front size matches your drawer box dimensions.
Ensure the mounting hole pattern on the drawer front aligns with the brackets or holes on your specific IKEA drawer box.
Check that your drawer runner system is correctly installed and can support the weight of the front when loaded.

Tip: Consult the assembly instruction of your specific IKEA cabinet or drawer system for detailed compatibility information.

Care & Maintenance

Clean with a damp cloth and mild detergent. Wipe dry immediately.

DO NOT use abrasive cleaners, scouring pads, or harsh chemicals as they may damage the surface. Avoid prolonged exposure to direct heat or steam.

Safety Information

This product is not a toy. Keep away from children during installation.
Ensure the furniture unit (cabinet) is securely anchored to the wall to prevent tipping, especially after installing drawers and loading them.
Do not exceed the maximum load capacity specified for your drawer runner system.
Check all fittings and screws periodically and retighten if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer front is uneven or crooked	Brackets not aligned; screws loose	Loosen screws, realign front, and retighten. Use adjustment screws on brackets.
Drawer does not close smoothly	Front misaligned; runner issue	Realign front. Check if drawer box is square and runners are properly installed/level.
Gaps around front are inconsistent	Improper alignment during installation	Loosen mounting screws, adjust position for even gaps, then retighten.
Handle feels loose	Screws not tightened	Tighten screws from the back of the drawer front. Do not overtighten.
Front does not mount to box	Incompatible bracket/hole pattern	Verify product compatibility. Ensure you are using the correct brackets and hardware for your drawer system.

Warranty & Support

This IKEA product is covered by IKEA's limited warranty. Refer to the IKEA warranty terms provided in store or online for specific duration and conditions.

For assembly help, missing parts, or other support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the specific assembly guide for your furniture system.

Note: Always keep your proof of purchase (receipt).