IKEA UTESPELARE 194.910.36 Desk instructions manual

The IKEA UTESPELARE 194.910.36 is a height-adjustable gaming desk designed for stability and ergonomic comfort. It features a sturdy steel frame, a spacious tabletop with a cable management net, adjustable height settings, and a built-in cable management solution. Below are key sections for safety, assembly, features, setup, adjustment, care, and warranty information.

1. Features at a Glance 2. Package Contents & Tools Required 3. Safety Instructions 4. Assembly Instructions 5. Height Adjustment Guide 6. Cable Management Setup 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Steel frame with electric height adjustment, Tabletop, Cable management net, Control panel with memory presets.

FeatureDescription
Electric Height AdjustmentMotorized system for smooth height changes
TabletopSpacious, durable surface with a gaming-inspired design
Cable Management NetIntegrated net under the desk to organize cables
Control PanelButtons for up/down and 4 memory presets
Steel FrameSturdy construction for stability during use
Anti-Collision SystemAutomatically stops if an obstacle is detected
Cable Management TrayAdditional tray for power strips and adapters
Weight CapacitySupports up to 70 kg (154 lbs) evenly distributed
Height RangeAdjustable from 65 cm to 125 cm (25.6" to 49.2")
Power SupplyConnects to standard 120V AC outlet

Package Contents & Tools Required

Unpack and verify all parts are present before assembly.

  1. Tabletop (1 piece)
  2. Steel frame with motors (1 assembly)
  3. Cable management net (1 piece)
  4. Cable management tray (1 piece)
  5. Control panel (1 unit)
  6. Power cable (1)
  7. Screw bags (A, B, C)
  8. Assembly manual (this document)

Tools you need: Phillips screwdriver (provided: Allen key). A second person is recommended for assembly.

Safety Instructions

Read all instructions before assembly and use.

  1. Ensure the desk is on a flat, stable surface.
  2. Do not exceed the maximum weight capacity of 70 kg.
  3. Keep fingers and objects clear of moving parts during adjustment.
  4. Unplug the power cable before performing any maintenance.
  5. Use only the provided power supply and cables.

WARNING! This product contains moving parts. Keep children and pets away during operation. Do not sit or stand on the desk.

Assembly Instructions

Follow steps in order. Two people are recommended.

  1. Prepare the Frame: Lay the steel frame upside down on a soft surface (e.g., carpet).
  2. Attach Feet: Secure the feet to the frame using screws from bag A.
  3. Mount the Tabletop: With help, flip the frame upright. Place the tabletop on the frame, aligning the pre-drilled holes.
  4. Secure Tabletop: Use screws from bag B to attach the tabletop to the frame.
  5. Install Cable Management: Attach the cable management net to the underside of the tabletop using the provided clips (bag C). Mount the cable tray to the frame.
  6. Connect Electronics: Plug the control panel into the designated port on the frame. Connect the power cable to the frame and then to a wall outlet.
  7. Final Check: Ensure all screws are tight and cables are not pinched.

CAUTION! Do not overtighten screws. Ensure the desk is stable before use.

Height Adjustment Guide

Using the control panel to adjust desk height.

  1. Power On: Plug in the desk. The control panel will light up.
  2. Basic Adjustment: Press the UP (↑) or DOWN (↓) button to adjust the height. Release to stop.
  3. Setting Memory Presets:
    • Adjust the desk to your desired height.
    • Press and hold one of the numbered buttons (1-4) for 3 seconds until it beeps.
    • The height is now saved to that preset.
  4. Recalling a Preset: Briefly press the numbered button (1-4) to move the desk to the saved height.

Tip: Use presets for quick switching between sitting and standing positions.

Cable Management Setup

Organize cables for a clean workspace.

  1. Route power strips and bulky adapters into the cable management tray.
  2. Use the integrated net to hold cables for monitors, PCs, and peripherals.
  3. Use zip ties (not included) to bundle cables together within the net.
  4. Ensure cables have enough slack to move freely when the desk height changes.

Warning: Do not pinch cables between moving parts. Keep power cables away from sharp edges.

Care & Maintenance

Unplug the desk before cleaning.

CAUTION! Never use harsh chemicals, solvents, or scouring pads. Avoid excessive moisture.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Desk does not moveNot plugged in / Power issueEnsure power cable is securely connected at both ends. Check wall outlet.
Desk moves unevenly or jerksObstruction / OverloadCheck for and remove obstacles under the desk. Ensure weight limit is not exceeded.
Control panel is unresponsiveLoose connectionUnplug the desk. Check the connection between the control panel and the frame. Replug power.
Desk stops mid-movement (beeps)Anti-collision triggeredRemove any object blocking the desk's path. Press any button to reset.
Memory presets not workingPreset not saved / Power lossRe-save your height to a preset button. Presets may be lost after a prolonged power outage.
Wobbling or instabilityUneven floor / Loose screwsPlace desk on a flat surface. Tighten all frame and tabletop screws.

Reset: Unplug the desk for 60 seconds, then plug it back in to reset the electronic system.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included in your purchase for full terms and duration.

For Support:
Visit: www.ikea.com
Contact IKEA Customer Support: 1-888-888-4532
Always have your model number (194.910.36) and proof of purchase ready.

Recycling: At end of life, dispose of this product according to local electronic and furniture recycling regulations.

IKEA UTESPELARE 194.910.36 Desk instructions manual © - All Rights Reserved 2025