IKEA UTÅKER 292.278.09 Stackable Bed instructions manual

The IKEA UTÅKER 292.278.09 is a versatile and space-saving stackable bed frame designed for flexibility and efficient use of space. It can be used as a single bed, bunk bed, or triple-stacked bed configuration. Made from solid pine and particleboard with a clear lacquer finish. Below are key sections for safety, features, assembly, configuration, care, and troubleshooting.

Features at a Glance

Key components: Solid pine bed frame, metal support brackets, slatted bed base, guard rails, ladder, and all necessary hardware.

Safety Information

Read all instructions before assembly and use.

1. Ensure all parts are securely tightened before use.
2. For bunk/triple beds: Use guard rails on all open sides of upper bunks.
3. Maximum weight: See specifications section.
4. Ladder must be properly attached before climbing.
5. Regularly check tightness of all connections.

WARNING! Never allow children under 6 years on upper bunk. Use mattress of proper size and thickness. Do not modify bed structure.

Parts & Hardware

Verify all parts before assembly. Contact IKEA if any parts are missing.

1. Bed frames (2 per bed unit)
2. Headboard/Footboard ends (4 per bed unit)
3. Slatted bed base (1 per bed unit)
4. Metal support brackets (set)
5. Guard rails (2 per upper bed)
6. Ladder (1)
7. Screws, bolts, washers, dowels (packaged)
8. Allen key (included)

CAUTION! Keep small hardware away from children during assembly.

Assembly Instructions

• Tools Needed: Allen key (included), hammer, Phillips screwdriver.
• Assembly Time: Approximately 60-90 minutes per bed unit.
• Difficulty: Moderate - requires two people.
• Space Required: Clear area larger than bed dimensions.

Basic Single Bed Assembly:

1. Lay headboard and footboard on soft surface.
2. Insert dowels into pre-drilled holes.
3. Attach side rails using provided screws.
4. Secure metal support brackets to inner frame.
5. Place slatted bed base on support brackets.
6. Flip bed upright and check stability.

Configuration Options

Three main configurations: Single bed, Bunk bed, Triple stack bed.

Single Bed: Use one bed unit at desired height (low, medium, high).

Bunk Bed: Stack two units using stacking pins. Attach guard rails to upper bunk. Secure ladder.

Triple Bed: Stack three units (maximum). Ensure all stacking pins are fully engaged. Use all guard rails.

Height Adjustment: Loosen bolts on bed posts, adjust to desired height setting, retighten securely.

Weight Limits & Dimensions

Antenna: Rear connector. AV: AV1/AV2 for composite/S-Video. PC: VGA + audio.

1. Single Bed: Max weight 220 lbs (100 kg)
2. Upper Bunk: Max weight 176 lbs (80 kg)
3. Mattress Thickness: Max 6 inches (15 cm) for bunk beds
4. Overall Dimensions (Single): 81.5" L x 41.75" W x variable H
5. Bed Height Settings: Low: 12", Medium: 24", High: 36"
6. Guard Rail Height: 11.8" above mattress surface

Tip: Always use proper mattress size to prevent gaps.

Playing DVD Media

Supports DVD-Video, audio CDs.

1. Insert disc: Press OPEN/CLOSE, load DVD.
2. Play: Press PLAY; select title/chapter with numeric buttons or arrows.
3. Stop: Press STOP (twice for complete stop); eject with OPEN/CLOSE.
4. Skip: PREV/NEXT for chapters/tracks.
5. Random/shuffle: Press P.MODE during play.
6. Zoom: Press ZOOM to magnify/reduce.
7. Angle change: Use ANGLE button if multiple angles available.
8. Last memory: Resume play from stop point on power on.

WARNING! Do not force disc; eject properly. Keep fingers from slot.

Care & Maintenance

Clean with damp cloth and mild detergent. Dry immediately.

Weekly: Check all bolts and connections for tightness.

Monthly: Inspect wood for cracks or damage.

Annually: Consider reapplying protective finish if needed.

CAUTION! Do not use abrasive cleaners. Avoid excessive moisture.

Disassembly & Moving

To disassemble: Reverse assembly order. Keep all hardware organized.

1. Remove mattress and bedding.
2. Remove slatted bed base.
3. Loosen and remove all screws/bolts.
3. Carefully separate components.
4. Pack hardware in labeled bags.
5. Protect wood surfaces during transport.

Note: Label parts if storing for reassembly.

Troubleshooting

Customer Service: 1-888-888-4532; www.ikea.com

Warranty: Limited 10-year warranty against manufacturing defects.