IKEA UPPSPEL 694.406.57 Peg Board instructions manual

The IKEA UPPSPEL 694.406.57 is a modular peg board system designed for organizing tools, accessories, and small items in home offices, workshops, or gaming setups. It features a sturdy metal frame, perforated board panels, and a variety of compatible hooks, shelves, and containers. Below are key sections for safety, components, assembly, installation, usage, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Tools Required 4. Assembly Instructions 5. Wall Mounting 6. Accessory Installation 7. Weight Limits & Safety 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Metal frame, perforated peg board panels, mounting brackets, and assortment of hooks and shelves.

Feature	Description
Modular Design	Allows for expansion and customization with additional panels
Perforated Panels	Standard 1/4" holes for compatibility with most peg board accessories
Metal Frame	Powder-coated steel for durability and stability
Wall Mounting	Includes brackets and hardware for secure installation
Accessory Hooks	Variety of hooks included for hanging tools and items
Adjustable Shelves	Small shelves for holding containers or frequently used items
Tool-Free Assembly	Most components snap together without tools
Cable Management	Integrated clips for routing cables behind panels
Load Capacity	Designed to hold up to 15 lbs per panel when properly mounted
Finish	Black matte finish for modern appearance

Package Contents

Unpack and verify all components before assembly.

Metal frame pieces (4 sides)
Peg board panels (2 pieces)
Wall mounting brackets (2 sets)
Assorted hooks (10 pieces various sizes)
Small shelves (2 pieces)
Mounting screws and wall anchors
Assembly manual (this document)

WARNING! Check for damaged parts before assembly. Do not use if any components are bent or broken.

Tools Required

Gather these tools before beginning assembly:

Phillips screwdriver
Level
Pencil for marking
Measuring tape
Electric drill (optional but recommended)
Stud finder (for optimal wall mounting)

CAUTION! Use appropriate safety equipment when drilling into walls.

Assembly Instructions

Follow these steps to assemble the peg board frame:

Lay all frame pieces on a flat, clean surface.
Connect the side pieces to form a rectangle, ensuring corners are square.
Insert the peg board panels into the frame, aligning the holes.
Secure panels with provided clips that snap into place.
Attach mounting brackets to the back of the frame at marked locations.
Verify all connections are secure before attempting to mount.

Tip: Assemble on a soft surface to avoid scratching the finish.

Wall Mounting

Proper mounting is essential for safety and stability.

Locate wall studs using a stud finder. Mounting into studs is recommended.
Hold assembled unit against wall at desired height (typically 48-60 inches from floor).
Use level to ensure unit is perfectly horizontal.
Mark screw holes through bracket openings.
Drill pilot holes at marked locations.
Insert wall anchors if not drilling into studs.
Secure brackets to wall with provided screws.
Hang assembled peg board onto mounted brackets.
Test stability by applying gentle pressure.

WARNING! Always mount to wall studs or use appropriate wall anchors for drywall. Do not mount to hollow doors or unstable surfaces.

Accessory Installation

Customize your peg board with included accessories:

Insert hooks into desired holes at various angles.
Attach shelves by inserting support brackets into holes, then placing shelf on top.
Use cable clips to route and organize cables behind panels.
Arrange accessories based on frequency of use - most used items at eye level.
Ensure heavy items are placed lower on the board for stability.

Tip: Plan your layout before installing accessories to optimize space.

Weight Limits & Safety

Maximum weight per panel: 15 lbs (6.8 kg)
Maximum weight per hook: 5 lbs (2.3 kg)
Maximum weight per shelf: 8 lbs (3.6 kg)
Do not hang: Extremely heavy tools, liquids in open containers, or hazardous materials
Keep away from: Heat sources, excessive moisture, and direct sunlight
Child safety: Do not allow children to climb on or hang from peg board

CAUTION! Exceeding weight limits may cause damage to wall or injury.

Care & Maintenance

Regular maintenance ensures longevity:

Dust regularly with soft, dry cloth.
For stubborn dirt, use mild soap solution and damp cloth, then dry immediately.
Check mounting hardware every 6 months for tightness.
Inspect hooks and shelves for wear or bending.
Do not use abrasive cleaners or solvents.
Avoid excessive moisture which may cause rust on metal components.

CAUTION! Do not use harsh chemicals; they may damage the finish.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Peg board feels loose	Loose wall mounting	Tighten all screws; ensure anchors are properly set in wall.
Hooks won't stay in place	Worn hook ends or wrong size	Replace with new hooks; ensure proper hook size for hole.
Shelf sags under weight	Exceeds weight limit	Remove items; redistribute weight; use multiple supports.
Frame won't assemble	Misaligned pieces	Disassemble and restart on level surface; check orientation.
Accessories fall off	Improper installation	Ensure hooks are fully inserted and rotated to lock position.
Board pulls away from wall	Insufficient wall support	Remount into studs or use heavier duty wall anchors.

Warranty & Support

IKEA limited warranty: 10 years against manufacturing defects. Warranty covers frame and panels but not accessories or damage from improper installation. For support, visit www.ikea.com or contact your local IKEA store. Keep your receipt as proof of purchase.

Recycling: Disassemble and separate materials (metal, wood/board) for proper recycling according to local regulations.