IKEA UPPSPEL 294.373.98 Cabinet instructions manual
The IKEA UPPSPEL 294.373.98 is a gaming cabinet designed for ergonomic storage and organization of gaming equipment, featuring cable management solutions, adjustable shelves, ventilation openings, and a sturdy construction. Below are key sections for safety, assembly, features, installation, use, care, and troubleshooting.
Features at a Glance
Key components: Cabinet frame, adjustable shelves, cable routing holes, rear ventilation panel, door with magnetic catch, leveling feet, and mounting hardware.
| Feature | Description |
|---|
| Adjustable Shelves | Multiple height positions for flexible storage |
| Cable Management | Integrated routing holes and clips |
| Ventilation Openings | Rear panel slots for airflow to prevent overheating |
| Magnetic Door Catch | Keeps door securely closed |
| Leveling Feet | Adjustable for stability on uneven floors |
| Sturdy Construction | Made from particleboard and steel fittings |
| Tool-Free Adjustments | Shelves can be repositioned without tools |
| Modular Design | Compatible with other UPPSPEL series components |
Package Contents & Tools Needed
Unpack and verify all parts before starting assembly.
- Package Contents: Cabinet panels (sides, top, bottom, back), adjustable shelves, door, hinges, magnetic catch, screws, cam locks, dowels, leveling feet, cable clips.
- Tools Needed: Phillips screwdriver, hammer (for dowels), level, measuring tape.
WARNING! Check for damaged parts before assembly. Contact IKEA support if anything is missing.
Safety Instructions
Follow these guidelines to ensure safe assembly and use.
- Assemble on a soft surface to avoid scratching parts.
- Use two people for lifting and positioning the cabinet.
- Secure the cabinet to the wall using the provided anti-tip device to prevent tipping.
- Do not exceed the maximum load capacity: 55 lbs (25 kg) per shelf.
- Keep away from direct heat sources and moisture.
CAUTION! The cabinet is heavy; lift with your legs, not your back.
Assembly Steps
Follow the numbered assembly guide included in the package.
- Step 1: Attach the sides to the bottom panel using cam locks and dowels.
- Step 2: Install the back panel by inserting into slots and securing with screws.
- Step 3: Attach the top panel using the provided screws.
- Step 4: Install the adjustable shelf supports at desired heights.
- Step 5: Mount the door using the hinges and adjust for proper alignment.
- Step 6: Attach the magnetic catch to keep the door closed.
- Step 7: Install the leveling feet and adjust for stability.
- Step 8: Secure the cabinet to the wall using the anti-tip bracket.
Tip: Do not fully tighten screws until all parts are aligned.
Installation & Placement
Choose a suitable location for your cabinet.
- Place the cabinet on a flat, stable surface.
- Ensure at least 2 inches (5 cm) of clearance at the back for ventilation and cable routing.
- Adjust the leveling feet until the cabinet is stable and does not rock.
- Secure to the wall using the provided anti-tip device and suitable wall anchors.
WARNING! Never place heavy objects on top of the cabinet. Distribute weight evenly on shelves.
Adjustments & Configuration
Customize the cabinet to fit your needs.
- Shelf Height: Lift shelf to remove, reposition supports, and place shelf at new height.
- Door Alignment: Loosen hinge screws to adjust door vertically/horizontally, then retighten.
- Magnetic Catch: Adjust screw position to increase or decrease holding force.
- Leveling Feet: Turn clockwise to lower, counterclockwise to raise each corner.
Cable Management
Use the integrated system to organize cables.
- Route cables through the rear holes before connecting devices.
2. Use the adhesive cable clips to bundle and secure cables along the back panel.
- Leave slack for devices that may need to be moved or adjusted.
- Ensure cables do not block ventilation openings.
Tip: Label cables for easy identification during maintenance.
Care & Maintenance
Proper care will extend the life of your cabinet.
- Clean surfaces with a soft, damp cloth. Do not use abrasive cleaners.
- For stubborn stains, use a mild soap solution. Dry immediately.
- Periodically check and tighten screws and fittings.
- Ensure ventilation openings are free of dust and debris.
CAUTION! Never use solvents, ammonia, or abrasive pads on surfaces.
Specifications
- Model: UPPSPEL 294.373.98
- Dimensions (HxWxD): 70.9" x 23.6" x 18.9" (180 x 60 x 48 cm)
- Weight: 88 lbs (40 kg)
- Material: Particleboard, foil, steel fittings
- Color: Black-brown
- Max Shelf Load: 55 lbs (25 kg) per shelf
- Door Swing: 90 degrees
- Ventilation: Rear panel openings
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
|---|
| Cabinet wobbles | Uneven floor or unadjusted feet | Adjust leveling feet; ensure all touch the floor. |
| Door does not close properly | Misaligned hinges or catch | Adjust hinge screws; reposition magnetic catch. |
| Shelf sags or is unstable | Overloaded or supports not locked | Reduce weight; ensure shelf supports are fully engaged. |
| Difficulty assembling parts | Parts misaligned or screws overtightened | Loosen screws, realign parts, then tighten gradually. |
| Scratches on surface | Assembly on hard surface | Assemble on carpet or cardboard; use touch-up pen if available. |
Note: Refer to the assembly drawings for part identification.
Warranty & Support
This product is covered by IKEA's limited warranty. For assistance:
- Visit the IKEA website: www.ikea.com
- Contact IKEA customer support: 1-888-888-4532
- Refer to your purchase receipt for warranty details.
- Spare parts can be ordered through IKEA services.
Copyright © IKEA of Sweden. UPPSPEL is a trademark of Inter IKEA Systems B.V.
IKEA UPPSPEL 294.373.98 Cabinet instructions manual © - All Rights Reserved 2025