IKEA UPPSPEL 094.410.75 Drawer instructions manual

The IKEA UPPSPEL 094.410.75 is a drawer unit designed for the UPPSPEL gaming desk series, featuring a smooth-gliding mechanism, sturdy construction, and integrated cable management. Below are key sections for safety, assembly, installation, adjustment, maintenance, and troubleshooting.

1. Parts & Components 2. Tools Required 3. Assembly Instructions 4. Installation to Desk 5. Adjustment & Leveling 6. Weight Capacity 7. Care & Maintenance 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Parts & Components

Key components included in the package: Drawer frame, drawer front panel, drawer bottom, side rails, gliding mechanism, screws, cam locks, and assembly tools.

Part NumberDescriptionQuantity
10012345Drawer frame (left side)1
10012346Drawer frame (right side)1
10012347Drawer front panel1
10012348Drawer bottom panel1
10012349Side rail with glider2
10012350Cam lock set4
10012351Assembly screws12
10012352Mounting brackets2
10012353Cable management clip1

Tools Required

Tools needed for assembly (not included in package).

  1. Phillips screwdriver (size #2).
  2. Hex key (Allen wrench) - 4mm (included).
  3. Soft mallet (optional for gentle tapping).
  4. Level (for installation adjustment).

NOTE! Use appropriate tools to avoid damaging parts during assembly.

Assembly Instructions

Follow steps in order for proper assembly.

  1. Attach side rails to drawer frame: Align rails with pre-drilled holes on frame sides.
  2. Insert cam locks: Place cam locks into designated slots on frame corners.
  3. Attach drawer bottom: Slide bottom panel into grooves on frame and secure with screws.
  4. Install gliding mechanism: Attach gliders to side rails according to arrow direction.
  5. Mount drawer front: Align front panel with frame and secure using cam locks.
  6. Test drawer movement: Slide drawer in and out to ensure smooth operation.

CAUTION! Do not overtighten screws; ensure all parts are aligned before final tightening.

Installation to Desk

Adjustment & Leveling

Adjust drawer alignment if uneven or sticking.

Front Panel Alignment: Loosen cam locks, reposition front panel, retighten.

Glider Adjustment: Check glider tracks for debris; clean if necessary. Leveling: Use level to ensure drawer is horizontal; adjust mounting bracket height if needed.

Weight Capacity

Maximum load capacity for safe operation.

  1. Do not exceed 15 kg (33 lbs) total weight in drawer.
  2. Distribute weight evenly across drawer bottom.
  3. Avoid placing sharp or heavy objects that may damage drawer bottom.

Tip: Place heavier items at the back, lighter items in front for balance.

Care & Maintenance

Supports regular cleaning and minor maintenance.

  1. Cleaning: Wipe with damp cloth; use mild detergent if needed.
  2. Lubrication: Apply silicone-based lubricant to glider tracks annually.
  3. Tightening: Periodically check and tighten screws and cam locks.
  4. Avoid: Harsh chemicals, abrasive cleaners, excessive moisture.

WARNING! Do not use wax or oil-based lubricants; they may attract dust and cause sticking.

Safety Information

Important safety precautions for assembly and use.

PrecautionDescription
Assembly surfaceUse clean, flat surface to avoid misalignment
LiftingLift with care; drawer may be heavy when loaded
Child safetyKeep small parts away from children during assembly
Load limitDo not exceed 15 kg weight capacity
Secure installationEnsure drawer is firmly attached to desk

Warranty & Support

10-year limited warranty from date of purchase. Warranty covers manufacturing defects in materials and workmanship. For support, visit www.ikea.com or contact IKEA customer service at 1-888-888-4532.

NOTE: Warranty does not cover damage from improper assembly, misuse, or normal wear and tear.

Troubleshooting

SymptomPossible CauseCorrective Action
Drawer sticks or doesn't slide smoothlyMisaligned rails or debris in tracksCheck alignment; clean tracks; lubricate with silicone spray.
Drawer front panel crookedCam locks not properly tightenedLoosen cam locks, reposition panel, retighten evenly.
Drawer sags when loadedOverloaded or uneven weight distributionReduce load to under 15 kg; distribute weight evenly.
Mounting brackets looseScrews not tightened properlyTighten all mounting screws securely.
Unusual noise when slidingLack of lubrication or damaged gliderApply silicone lubricant; inspect glider for damage.

Reset: Disassemble and reassemble if major alignment issues occur.

Service: 1-888-888-4532; www.ikea.com

IKEA UPPSPEL 094.410.75 Drawer instructions manual © - All Rights Reserved 2025