IKEA UPPLYST 004.407.87 Wall Lamp instructions manual

The IKEA UPPLYST 004.407.87 is a modern wall lamp designed for ambient lighting. It features a sleek, minimalist design suitable for various interior styles. This manual provides essential information for safe installation, operation, and maintenance of your wall lamp. Below are key sections covering safety, parts, installation, operation, care, and troubleshooting.

1. Safety Information 2. Parts Included 3. Tools Required 4. Installation Instructions 5. Operation 6. Specifications 7. Care & Cleaning 8. Troubleshooting 9. Warranty & Support

Safety Information

Read all safety instructions before installation and use.

Warning	Description
Electrical Safety	Ensure power is turned OFF at the circuit breaker before installation. Use only with specified voltage.
Installation Location	Install on a stable, dry wall. Keep away from water, heat sources, and flammable materials.
Bulb Specification	Use only LED bulbs with max wattage as specified. Do not exceed recommended wattage.
Children & Pets	Keep out of reach of young children and pets. Lamp surface may become warm during use.
Maintenance	Always unplug or turn off power before cleaning or performing any maintenance.

Parts Included

Check that all parts are present before starting installation.

Wall lamp shade (1 piece)
Mounting bracket with screws (1 set)
Wire connectors (2 pieces)
Instruction manual (this document)

NOTE: Light bulb(s) are not included. Purchase separately.

Tools Required

You will need the following tools (not included):

Phillips screwdriver
Drill (if mounting on hard surfaces)
Wall anchors (if not mounting on stud)
Wire stripper/cutter
Voltage tester
Pencil and level

Installation Instructions

Follow these steps carefully for proper installation.

Turn Off Power: Switch off electricity at the main circuit breaker for the installation area.
Mark Position: Hold mounting bracket against wall at desired height. Use level to ensure it is straight. Mark screw holes with pencil.
Drill Holes: Drill holes at marked points. Insert wall anchors if needed.
Mount Bracket: Align bracket with holes and secure with provided screws.
Connect Wires: Connect lamp wires to house wiring: black/red to live (L), white to neutral (N), green/yellow to ground (G). Use wire connectors and secure connections.
Attach Lamp: Align lamp base with mounted bracket. Secure according to lamp design (may involve tightening a screw or snapping into place).
Install Bulb: Insert recommended LED bulb. Do not touch bulb with bare hands; use cloth if necessary.
Restore Power & Test: Turn power back on at circuit breaker. Switch lamp on to test operation.

WARNING! If you are unsure about electrical work, consult a qualified electrician.

Operation

Your UPPLYST wall lamp is operated via a standard wall switch or connected switch cord.

On/Off: Use the wall switch connected to the lamp's circuit.
Dimming: This lamp is compatible with leading-edge (TRIAC) dimmers if using dimmable LED bulbs. Ensure dimmer and bulb are compatible.
Ambient Lighting: The lamp provides diffused, upward/downward light ideal for creating a soft atmosphere.

Tip: For optimal light distribution, avoid placing objects directly in front of the lamp.

Specifications

Model: UPPLYST 004.407.87
Type: Wall Lamp, Sconce
Material: Steel/Plastic (Finish: White/Black)
Dimensions (approx.): Height: 8.7 in (22 cm), Width: 5.9 in (15 cm), Projection: 4.3 in (11 cm)
Max Bulb Wattage: 7W LED max (equivalent to 60W incandescent)
Bulb Base: E26/E27 (Standard)
Input Voltage: 120V AC, 60Hz (for North America)
Dimmable: Yes, with compatible dimmable LED bulb and dimmer switch.
IP Rating: IP20 - For indoor dry locations only.
Weight: 1.1 lbs (0.5 kg)

Care & Cleaning

Proper care ensures longevity and safe operation.

Power Off: Always turn off and let the lamp cool completely before cleaning.
Exterior: Wipe the lamp shade and body with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, chemicals, or solvents.
Bulb: Clean bulb only when cool with a dry cloth.
Inspection: Periodically check that the lamp is securely mounted and that wires/connections are not exposed or damaged.

CAUTION! Never immerse the lamp in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power off, bulb faulty, loose connection	Check circuit breaker/wall switch. Replace bulb. Ensure all wire connections are tight.
Lamp flickers	Loose bulb, incompatible dimmer, faulty bulb	Tighten bulb. Ensure dimmer and LED bulb are compatible. Try a different bulb.
Lamp is dim	Dimmer setting low, incorrect bulb wattage	Adjust dimmer. Ensure bulb meets recommended specifications.
Lamp gets very hot	Bulb wattage too high, poor ventilation	Immediately turn off. Replace with a bulb of correct max wattage. Ensure lamp is not covered.
Buzzing sound from dimmer	Incompatible dimmer with LED	Replace dimmer switch with an LED-compatible model.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at purchase or on IKEA's website.

For Support:
Visit: www.ikea.com
Contact your local IKEA store.
Have your product name (UPPLYST) and article number (004.407.87) ready.

Recycling: Dispose of the product and any electronic components according to local regulations. Do not dispose of with household waste.