IKEA UPPLÖV 794.930.37 Corner Cabinet instructions manual

The IKEA UPPLÖV 794.930.37 is a corner cabinet designed for efficient storage in kitchen or living spaces. It features a modern design, adjustable shelves, soft-closing hinges, and is constructed from particleboard with a white foil finish. Below are key sections for safety, assembly, installation, use, care, and troubleshooting.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Installation & Mounting 5. Adjustments & Features 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Cabinet frame panels, door, hinges, adjustable shelves, shelf supports, mounting brackets, screws, dowels, cam locks.

Part DescriptionQuantityIdentification Code
Cabinet side panel (left)1A1
Cabinet side panel (right)1A2
Cabinet back panel1B
Cabinet top panel1C
Cabinet bottom panel1D
Door panel1E
Adjustable shelf2F
Soft-closing hinge set2G
Mounting bracket set1 setH
Screw & dowel package1 packI

Safety Information

Read all instructions before assembly. Ensure a safe workspace.

  1. Assembly requires two people for safety and stability.
  2. Use provided tools only; do not overtighten screws.
  3. Keep children and pets away during assembly.
  4. Check wall structure before mounting; use wall studs or appropriate anchors.

WARNING! Cabinet is heavy; lift with care to avoid injury. Ensure cabinet is securely mounted to wall to prevent tipping.

Assembly Instructions

Follow steps in order. Allow approximately 45-60 minutes for assembly.

  1. Prepare panels: Lay all panels on a soft, clean surface to prevent scratches.
  2. Connect side and bottom panels: Insert dowels into pre-drilled holes in side panels (A1, A2). Attach to bottom panel (D) using cam locks.
  3. Attach back panel: Position back panel (B) and secure with provided screws.
  4. Install top panel: Place top panel (C) and secure with cam locks to side panels.
  5. Install shelf supports: Insert supports into desired height positions on side panels.
  6. Mount hinges: Attach soft-closing hinges (G) to door (E), then mount door to cabinet frame.
  7. Adjust door: Use hinge screws to align door horizontally and vertically.

CAUTION! Do not force parts; ensure all connections are flush before tightening.

Installation & Mounting

Corner cabinet must be secured to wall for safety.

  1. Locate wall studs in corner using a stud finder.
  2. Position cabinet in corner, ensuring it is level using a spirit level.
  3. Mark drilling points through mounting brackets (H) onto wall.
  4. Drill pilot holes into wall studs or use heavy-duty wall anchors if no stud is available.
  5. Secure cabinet to wall with provided screws through brackets.
  6. Double-check stability by gently pulling forward on cabinet.

Tip: For optimal corner fit, ensure adjacent cabinets or walls are square.

Adjustments & Features

Customize your cabinet for optimal use.

Shelves: Adjust height by moving shelf supports. Supports click into pre-drilled holes.

Door: Soft-closing hinges prevent slamming. Adjust door alignment via three screws on each hinge (height, depth, side pressure).

Interior: Maximize corner space with adjustable shelves. Recommended load per shelf: 15 kg (33 lbs).

Care & Maintenance

Clean with a damp, soft cloth. Use mild soap if needed; wipe dry immediately.

Avoid: Abrasive cleaners, scouring pads, solvents, or excessive water.

Periodic check: Tighten hinge screws and mounting brackets annually to maintain stability.

CAUTION! Do not place hot items directly on surfaces. Avoid prolonged moisture exposure.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Door does not close smoothlyHinge misalignmentAdjust hinge screws for height/depth.
Cabinet feels unstableNot securely mountedCheck wall anchors/screws; tighten mounting brackets.
Shelf does not sit levelSupports not fully insertedEnsure shelf supports are clicked into identical holes on both sides.
Gaps between panelsCam locks not fully tightenedTurn cam locks 90° clockwise until tight; ensure dowels are fully seated.
Door slams shutSoft-close mechanism issueCheck hinge for debris; ensure hinge is properly attached to door and frame.

Note: For missing or damaged parts, contact IKEA customer service with product number.

Warranty & Support

IKEA limited warranty applies. Refer to IKEA warranty terms for details.

For assembly support, missing parts, or product questions:

Safety Recall Information: Register your product at IKEA website to receive safety notices.

IKEA UPPLÖV 794.930.37 Corner Cabinet instructions manual © - All Rights Reserved 2025