IKEA TYSSEDAL 903.188.05 Drawer instructions manual

The IKEA TYSSEDAL 903.188.05 is a drawer designed for use with compatible IKEA furniture frames, featuring a smooth-gliding runner system, durable construction, and easy assembly. Below are key sections for safety, parts identification, step-by-step assembly, installation, adjustment, care, and troubleshooting.

Parts Overview

Key components included in the package: Drawer front panel, drawer box (sides, back, bottom), runner assemblies, screws, cam locks, and assembly hardware.

Tools Required

No specialized tools needed; basic household tools are sufficient.

1. Phillips screwdriver (size #2 recommended).
2. Hammer (optional, for tapping parts into place).
3. Soft mallet (optional, to avoid damaging surfaces).
4. Clean, flat workspace.

NOTE: Ensure you have all parts listed before beginning assembly. Check package contents against parts list.

Assembly Instructions

Follow steps in order; do not overtighten screws.

1. Join side panels to back panel: Insert cam locks into side panels, align with back panel holes, turn locks clockwise to secure.
2. Attach bottom panel: Slide bottom into grooves on side and back panels; ensure it sits flush.
3. Secure bottom (if required): Some models use screws to secure bottom; insert provided screws.
4. Attach runners: Align runner with pre-drilled holes on drawer sides; secure with screws.
5. Attach front panel: Align front panel with drawer box; secure from inside using screws.

CAUTION! Assemble on soft surface to avoid scratching parts. Do not force connections.

Installation into Frame

• Compatible frames: Designed for IKEA TYSSEDAL and other compatible cabinet frames.
• Runner mounting: Secure cabinet runners to inner sides of frame using provided screws.
• Alignment: Ensure runners are level and at equal height.
• Insertion: Engage drawer runners with cabinet runners; push gently until click.
• Test operation: Open and close drawer to ensure smooth movement.

Drawer Adjustment

For optimal performance, adjust if drawer is uneven or sticks.

Height adjustment: Loosen screws on cabinet runners, adjust up/down, retighten.

Depth adjustment: Some runners have depth stops; adjust to control how far drawer extends.

Alignment: If drawer front is uneven, adjust screws on front panel attachment points.

Lubrication: Do not oil runners; clean with dry cloth if sticking occurs.

Weight Capacity

Maximum load: 55 lbs (25 kg) evenly distributed.

1. Do not exceed weight limit to prevent damage to runners or drawer bottom.
2. Distribute weight evenly; avoid placing heavy items only at front or back.
3. For heavy items, place toward back of drawer for better balance.

WARNING! Overloading may cause drawer to sag, runners to fail, or injury.

Care & Maintenance

Clean with damp cloth; avoid harsh chemicals.

1. Wipe exterior with soft, damp cloth; dry immediately.
2. For interior, use mild soap solution if needed; do not soak.
3. Clean runners with dry cloth to remove dust/debris.
4. Avoid abrasive cleaners; they may damage finish.

CAUTION! Do not use solvents, ammonia, or abrasive pads.

Safety Information

Keep away from children during assembly; secure furniture to wall.

Warranty & Support

IKEA limited warranty applies; see IKEA warranty terms for details.

For missing parts or support: Contact IKEA customer service with product number (903.188.05) and purchase details. Visit www.ikea.com or your local IKEA store.

Replacement parts: Available through IKEA; do not use non-IKEA parts as they may affect safety.

Troubleshooting

Note: If problems persist, contact IKEA customer support for assistance.