IKEA TVÄRFOT 004.675.26 Table Lamp instructions manual

The IKEA TVÄRFOT 004.675.26 is a modern table lamp designed for home and office use, featuring a stable base, adjustable shade, and energy-efficient bulb compatibility. It requires simple assembly and provides warm, focused lighting. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Parts & Contents 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Bulb Replacement 7. Care & Cleaning 8. Troubleshooting 9. Warranty & Support

Parts & Contents

Key components included in the package: Lamp base, adjustable shade, lamp stem, bulb socket, power cord with switch, assembly hardware, and instruction manual.

PartDescription
Lamp BaseWeighted base for stability
Adjustable ShadeMetal/plastic shade with tilt mechanism
Lamp StemConnects base to socket and shade
Bulb SocketE26/E27 standard socket
Power Cord with SwitchOn/off switch on cord
Assembly HardwareScrews and fasteners
Instruction ManualThis document

Safety Information

Read all instructions before assembly and use.

  1. Use only with recommended bulb type and wattage (max 60W incandescent or equivalent LED).
  2. Unplug lamp before assembly, cleaning, or bulb replacement.
  3. Place on stable, flat surface away from edges.
  4. Keep away from water, heat sources, and flammable materials.

WARNING! Risk of electric shock or fire if used improperly. Do not modify cord or socket.

Assembly Instructions

Estimated assembly time: 10-15 minutes. Tools required: None (hand-tighten).

  1. Attach stem to base: Insert stem into base hole and tighten clockwise.
  2. Connect socket: Thread socket onto top of stem; ensure secure.
  3. Attach shade: Place shade over socket; align and secure with provided ring.
  4. Route cord: Feed cord through stem channel; plug into socket terminals.
  5. Insert bulb: Screw in compatible bulb (not included).
  6. Test: Plug into wall outlet; switch on to verify operation.

CAUTION! Do not overtighten parts. Ensure all connections are firm.

Specifications

Operation & Controls

Power cord includes an inline on/off switch. Adjust shade angle by gently tilting.

Features: Stable weighted base, adjustable shade for directed lighting, energy-efficient design.

Usage Tips: Place on bedside table, desk, or shelf. Use with soft-white LED bulb for warm light. Adjust shade to avoid glare.

Bulb Replacement

Compatible with E26/E27 base bulbs: LED, CFL, or incandescent (max 60W).

  1. Unplug lamp and allow bulb to cool.
  2. Gently grasp bulb; turn counterclockwise to remove.
  3. Insert new bulb; turn clockwise until snug.
  4. Plug in and test.

WARNING! Never exceed max wattage. Do not touch bulb with wet hands.

Care & Cleaning

Unplug before cleaning. Use dry, soft cloth to dust. For stains, use damp cloth with mild soap; dry immediately.

CAUTION! Do not immerse in water. Avoid abrasive cleaners. Do not spray directly.

Troubleshooting

SymptomPossible CauseCorrective Action
Lamp does not turn onBulb burnt out; loose connectionReplace bulb; check plug and socket connections.
Flickering lightLoose bulb; faulty bulbEnsure bulb is tight; try different bulb.
Lamp unstableBase not assembled tightlyCheck and tighten stem-to-base connection.
Shade looseRetaining ring not secureGently tighten shade retaining ring.
OverheatingBulb wattage too highUse bulb within max wattage rating.

Note: If issues persist, discontinue use and contact support.

Warranty & Support

IKEA limited warranty: 1 year from date of purchase against manufacturing defects. Keep receipt for warranty claims.

For assistance: Visit IKEA store or www.ikea.com. Contact IKEA customer service at 1-888-888-4532.

Recycling: Dispose of lamp according to local electronic waste regulations.

IKEA TVÄRFOT 004.675.26 Table Lamp instructions manual © - All Rights Reserved 2025