IKEA TVETÖ 804.688.57 Umbrella instructions manual

The IKEA TVETÖ 804.688.57 is a freestanding outdoor umbrella designed for patios, decks, and gardens. It features a durable polyester canopy, a sturdy aluminum and steel pole, a crank mechanism for easy opening and closing, a tilt function for sun angle adjustment, and a weighted base for stability. Below are key sections for safety, assembly, operation, care, and troubleshooting.

Features at a Glance

Key components: Polyester canopy, Aluminum/steel pole, Crank handle, Tilt mechanism, Weighted base, Ventilation top.

Assembly Instructions

Unpack all parts and check contents. Assemble on a flat, clean surface.

1. Assemble the pole: Connect the pole sections together, ensuring they are securely locked.
2. Attach the ribs: Slide the umbrella ribs into the slots on the top runner and secure them.
3. Attach the canopy: Drape the canopy over the ribs and secure it with the provided fasteners or ties.
4. Install the crank handle: Insert the crank handle into the designated hole on the pole and secure it.
5. Attach the tilt mechanism (if applicable): Follow the specific instructions for your model.
6. Prepare the base: Fill the base with sand or water as per the weight recommendations for stability.
7. Insert the pole: Place the assembled pole into the base and secure it according to instructions.

WARNING! Umbrella is heavy; use two people for assembly to avoid injury. Ensure all connections are tight and secure.

First-Time Setup

After assembly, follow these steps for initial use.

1. Position the umbrella: Place the assembled umbrella on a flat, stable surface away from obstacles.
2. Secure the base: Ensure the base is properly weighted (sand/water) to prevent tipping.
3. Test the crank: Turn the crank handle clockwise to open the canopy fully. Turn counterclockwise to close.
4. Test the tilt: Engage the tilt mechanism (if available) to adjust the canopy angle.
5. Check stability: Gently shake the umbrella to ensure it is firmly anchored.

CAUTION! Do not use the umbrella in high winds. Always close and secure it when not in use or during inclement weather.

Specifications

• Product Name: TVETÖ
• Article Number: 804.688.57
• Type: Freestanding Garden Umbrella
• Canopy Diameter: Approx. 3 m (9.8 ft)
• Canopy Material: 100% polyester (water-resistant)
• Frame Material: Aluminum, steel
• Pole Diameter: 48 mm
• Mechanism: Crank open/close, tilt function
• Base: Weighted (fill with sand/water), approx. 20 kg capacity
• Color: Varies (e.g., beige, grey)
• Weight: Approx. 15 kg (without base filling)
• Recommended Use: Outdoor, residential

Controls and Operation

Primary controls: Crank handle, Tilt lock, Canopy ties.

Opening: Turn the crank handle clockwise until the canopy is fully extended and taut.

Closing: Turn the crank handle counterclockwise until the canopy is fully closed. Secure with the strap provided.

Tilt Adjustment: Locate the tilt lock mechanism (usually a pin or lever). Release it, adjust the canopy to the desired angle, and re-engage the lock.

Ventilation: The vent at the top helps reduce wind resistance. Ensure it is clear of debris.

Tilt Adjustment

The tilt function allows you to block the sun at different angles throughout the day.

1. Ensure the umbrella is fully open and stable.
2. Locate the tilt lock mechanism on the pole (often a push-button or lever).
3. Release the lock to allow the canopy to tilt.
4. Gently push or pull the canopy to the desired angle.
5. Re-engage the lock to secure the position.

Tip: Do not force the tilt mechanism. If it is stiff, check for obstructions or debris.

Care & Maintenance

Regular care extends the life of your umbrella.

1. Cleaning: Use a soft brush or cloth with mild soap and water to clean the canopy. Rinse thoroughly and allow it to dry completely before closing.
2. Frame: Wipe the metal frame with a damp cloth to remove dirt. Dry immediately to prevent rust.
3. Lubrication: Apply a small amount of silicone-based lubricant to the crank mechanism and tilt joints annually to ensure smooth operation.
4. Inspection: Periodically check all screws, bolts, and fabric ties for tightness and wear.

CAUTION! Do not use abrasive cleaners, bleach, or high-pressure water on the canopy or frame.

Storage

Proper storage protects the umbrella during off-seasons or bad weather.

1. Close the umbrella completely and secure it with the strap.
2. Clean the canopy and frame as described in the Care section.
3. Ensure the umbrella is completely dry to prevent mold and mildew.
4. If possible, disassemble the umbrella and store it in a cool, dry place.
5. If leaving it assembled, use a protective cover designed for garden umbrellas.

WARNING! Never store the umbrella while wet. Always remove it from the base if high winds are forecast.

Safety Information

Important safety guidelines for use.

• Always secure the base with the recommended weight (sand or water).
• Do not use the umbrella in winds exceeding 20 mph (32 km/h).
• Keep children and pets away from the mechanism during operation.
• Ensure the umbrella is fully closed and secured when not in use.
• Do not hang heavy items from the ribs or canopy.
• Place the umbrella away from overhead power lines, trees, or structures.
• Inspect regularly for damage, especially after storms.

DANGER! An unsecured umbrella can become a projectile in strong winds, causing property damage or injury.

Warranty & Support

IKEA limited warranty applies. For product support, contact IKEA customer service.

Warranty: Refer to the IKEA warranty card included with your product for specific terms and duration.

Spare Parts: Some spare parts (e.g., crank handle, canopy ties) may be available. Check with IKEA.

Contact: Visit www.ikea.com or your local IKEA store for assistance. Have the article number (804.688.57) ready.

Troubleshooting

Note: For issues not resolved above, discontinue use and contact IKEA customer support.

Service: www.ikea.com or visit your local IKEA store.