IKEA TULLSTORP 404.984.32 Cabinet instructions manual

The IKEA TULLSTORP 404.984.32 is a freestanding cabinet designed for living room or bedroom storage, featuring a classic design with two doors, adjustable shelves, and a sturdy construction. Below are key sections for safety, assembly, installation, use, care, and troubleshooting.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Installation & Placement 5. Adjusting Shelves 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Parts & Hardware

Key components: Cabinet frame, doors, shelves, hinges, screws, cam locks, dowels, and assembly tools.

Part NameQuantityDescription
Cabinet Side Panel2Left and right side panels with pre-drilled holes
Top Panel1Cabinet top with finished edges
Bottom Panel1Cabinet base with pre-attached feet
Back Panel1Fiberboard back for stability
Doors2Hinged doors with handles
Adjustable Shelves2Removable shelves with shelf pins
Hinge Set4Concealed hinges for door attachment
Cam Lock Screws8For panel connection
Dowel Pins12Wooden pins for alignment
Assembly Tool1Hex key provided

Safety Instructions

Read all instructions before assembly. Ensure safe handling and placement.

  1. Assemble on a soft, clean surface to avoid scratches.
  2. Use two people for lifting and positioning the cabinet.
  3. Secure cabinet to wall using provided wall attachment device to prevent tipping.
  4. Keep small hardware away from children to avoid choking hazards.
  5. Do not place heavy objects exceeding shelf weight capacity.

WARNING! Cabinet is heavy; lift with care to avoid injury. Always secure to wall.

Assembly Steps

Follow numerical order on instruction sheets. Estimated assembly time: 45-60 minutes.

  1. Lay side panels flat; insert dowels into pre-drilled holes.
  2. Attach top and bottom panels using cam locks and screws.
  3. Insert back panel into grooves; secure with provided nails or screws.
  4. Attach hinges to doors using screws; mount doors to side panels.
  5. Insert shelf pins at desired heights; place shelves on pins.
  6. Adjust door alignment using hinge screws for even gap.
  7. Attach handles to doors if not pre-attached.

CAUTION! Do not overtighten screws; use correct tool to avoid stripping.

Installation & Placement

Tip: Use furniture pads under feet to protect floor and aid leveling.

Adjusting Shelves

Shelves are adjustable via shelf pins.

  1. Remove all items from shelf.
  2. Lift shelf slightly and pull forward to remove from pins.
  3. Reposition shelf pins to desired height (multiple holes provided).
  4. Place shelf on new pins, ensuring it sits level and secure.

Note: Maximum load per shelf: 15 kg (33 lbs). Do not exceed.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

  1. Dust regularly with soft, dry cloth.
  2. For stains, use mild soap solution; wipe dry immediately.
  3. Do not use wax, polish, or chemical cleaners on surfaces.
  4. Tighten hinges and screws periodically if loosening occurs.

CAUTION! Avoid excess moisture; never soak or steam clean.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Doors not alignedHinge adjustment neededLoosen hinge screws, reposition door, retighten.
Shelf wobblesPins not fully insertedRemove shelf, ensure pins are securely in holes.
Cabinet unstableFloor uneven or not levelAdjust feet or use shims; attach to wall.
Hardware missingPackaging errorContact IKEA for replacement parts.
Scratches on surfaceAssembly on hard surfaceUse touch-up pen (available from IKEA).

Note: Do not modify structure; use only IKEA parts for repairs.

Warranty & Support

10-year limited warranty against manufacturing defects. Warranty does not cover damage from misuse, improper assembly, or accidents. For missing parts or support, visit www.ikea.com or contact IKEA customer service at 1-800-434-4532. Keep receipt as proof of purchase.

IKEA TULLSTORP 404.984.32 Cabinet instructions manual © - All Rights Reserved 2025