The IKEA TUFFING 302.994.47 is a versatile loft bed designed to maximize space in a room. It features a sturdy metal frame, a sleeping area on the top level, and open space below for a desk, seating, or storage. The assembly requires careful attention to safety and step-by-step instructions. Below are key sections for safety warnings, parts list, tools required, assembly instructions, usage guidelines, care, and warranty information.
Read all instructions before assembly. Keep for future reference.
| Warning | Description |
|---|---|
| Guardrails | Always use guardrails on both sides of the upper bunk to prevent falls. |
| Weight Limit | Do not exceed maximum weight capacity for top bunk (see specifications). |
| Age Recommendation | Not recommended for children under 6 years. Use top bunk only if child can safely climb. |
| Assembly Surface | Assemble on a soft, clean surface to avoid scratching parts. |
| Secure to Wall | For stability, secure bed frame to wall using provided hardware and wall anchors. |
| Regular Checks | Periodically check all bolts, screws, and connections for tightness. |
| No Jumping | Do not allow jumping or rough play on the bed. |
| Ladder Use | Always use the provided ladder for access; do not use other furniture. |
| Clearance | Ensure minimum clearance from ceiling fixtures (fans, lights) is maintained. |
| Mattress Fit | Use only mattress of specified size and thickness to prevent gaps. |
Check that all parts are present before starting assembly. Contact IKEA if any parts are missing.
WARNING! Do not substitute hardware; use only provided parts for safety.
You will need the following tools (not included):
CAUTION! Use tools carefully to avoid damaging parts or injury.
Follow steps in order. Two people are recommended for assembly.
Use only a mattress that fits properly for safety and comfort.
Required Mattress Size: Twin (38" W x 75" L) / (96.5 cm x 190.5 cm).
Thickness: Not to exceed 6 inches (15 cm). A thicker mattress can reduce the effective height of the guardrail.
Support: The slatted bed base provides ventilation and support. No box spring needed.
Clean with a soft, damp cloth. Do not use abrasive cleaners or chemicals on the metal finish.
CAUTION! Do not use the bed if any part is loose, damaged, or missing.
To disassemble, reverse the assembly steps.
Tip: Take photos during disassembly to aid reassembly.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Bed wobbles or shakes | Bolts not tight; not secured to wall | Tighten all frame connections. Ensure bed is anchored securely to wall studs. |
| Guardrail feels loose | Bracket screws loose | Tighten all screws connecting guardrail brackets to bed frame. |
| Ladder unstable | Attachment points not secure | Check and tighten the 4 screws connecting ladder to footboard. |
| Squeaking noises | Metal parts rubbing; loose joints | Tighten all connections. Apply a small amount of furniture wax or lubricant to joints if necessary. |
| Mattress slides | Mattress too small; slats not secured | Use correct size twin mattress. Ensure support slats are properly attached and evenly spaced. |
Reset: If instability persists, disassemble and reassemble following instructions precisely.
Service: For missing parts or support, visit www.ikea.com or contact your local IKEA store.
This product is covered by IKEA's limited warranty. Refer to the warranty card included in the packaging for specific terms and duration.
Safety Standards: Meets ASTM F1427 and CPSC safety standards for bunk beds.
Copyright © IKEA. TUFFING is a trademark of Inter IKEA Systems B.V.
For customer support, assembly videos, or to order missing parts: www.ikea.com or call 1-888-888-4532.