IKEA TROTTEN 194.296.57 Cabinet instructions manual

The IKEA TROTTEN 194.296.57 is a versatile cabinet designed for home or office storage, featuring a modern design, durable construction, and adjustable shelves. It requires assembly and includes all necessary hardware. Below are key sections for safety, parts list, assembly instructions, installation, care, and troubleshooting.

1. Parts and Hardware Included 2. Safety Information 3. Assembly Instructions 4. Installation and Mounting 5. Adjustments and Configuration 6. Care and Maintenance 7. Specifications 8. Troubleshooting 9. Warranty and Support

Parts and Hardware Included

Before assembly, verify all parts are present. Key components: Cabinet panels, doors, shelves, hinges, screws, cam locks, dowels, and mounting hardware.

Part Description	Quantity	Identification Code
Cabinet side panel (left)	1	A
Cabinet side panel (right)	1	B
Top panel	1	C
Bottom panel	1	D
Back panel	1	E
Adjustable shelf	2	F
Door panel	2	G
Hinge set	4	H
Cam lock with screw	8	I
Wooden dowel	12	J
Mounting bracket	2	K
Door handle	2	L

Safety Information

Read all instructions before assembly. Ensure a safe workspace.

Assembly requires two people for safety and stability.
Keep children and pets away from assembly area.
Use tools carefully to avoid injury.
Assemble on a soft surface to prevent scratches.

WARNING! Cabinet is heavy; lift with care to avoid injury. Ensure all connections are secure before use. Do not climb or stand on the cabinet.

Assembly Instructions

Follow steps in order. Use included Allen key.

Prepare panels: Lay all panels flat with finished sides facing down.
Insert dowels: Insert wooden dowels (J) into pre-drilled holes on side panels (A, B).
Attach top and bottom: Align top (C) and bottom (D) panels with side panels. Secure with cam locks (I).
Install back panel: Place back panel (E) into grooves. Secure with provided screws.
Mount shelves: Insert adjustable shelves (F) into shelf support pins at desired height.
Attach doors: Install hinges (H) to doors (G), then mount doors to cabinet frame. Adjust for alignment.
Install handles: Attach door handles (L) to doors using screws.

CAUTION! Do not overtighten screws; this may damage the material. Ensure all cam locks are fully tightened and flush.

Installation and Mounting

For wall mounting to prevent tipping, especially in households with children.

Locate wall studs using a stud finder.
Position cabinet against wall in desired location.
Attach mounting brackets (K) to cabinet back panel using provided screws.
Mark bracket holes on wall, drill pilot holes into studs.
Secure cabinet to wall with suitable screws (not included for all wall types).

Tip: Ensure cabinet is level before final tightening. Use wall anchors if not attaching to studs.

Adjustments and Configuration

Customize your cabinet for optimal use.

Shelf Height: Shelves are adjustable. Remove shelf, reposition support pins, and replace shelf.

Door Alignment: If doors are uneven, adjust hinges:

Loosen screws on hinge attached to cabinet.
Move door up/down or left/right as needed.
Tighten screws to secure position.

Magnetic Catches: Adjust screw on magnetic catch inside cabinet to ensure door closes securely.

Care and Maintenance

To maintain appearance and longevity.

Clean with a damp, soft cloth. Wipe dry immediately.
Use mild soap solution if needed. Avoid abrasive cleaners.
Do not use wax, polish, or silicone-based products.
Protect from direct sunlight and excessive humidity.

CAUTION! Do not use harsh chemicals, scouring pads, or excessive water. Never spray liquids directly onto surfaces.

Specifications

Product Name: TROTTEN
Article Number: 194.296.57
Dimensions (W x H x D): 80 cm x 120 cm x 40 cm
Weight: 25 kg (approx.)
Material: Particleboard, Fiberboard, Plastic, Steel
Color: White
Max Load per Shelf: 15 kg
Door Swing: 90 degrees
Required Tools for Assembly: Allen key (included), Phillips screwdriver, hammer (for dowels).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Cabinet wobbles	Uneven floor; loose connections	Place on level surface; check and tighten all cam locks and screws.
Doors not closing properly	Misaligned hinges; magnetic catch	Adjust hinges as per section 6; adjust magnetic catch screw.
Shelf does not sit level	Support pins not fully inserted	Ensure all shelf support pins are pushed completely into their holes.
Difficulty inserting dowels	Misalignment; debris in hole	Align panels precisely; clear any packaging debris from holes.
Cam lock won't tighten	Cross-threaded or stripped	Loosen completely, realign, and retighten. Do not force.
Scratches on surface	Assembly on hard surface	Assemble on carpet or cardboard. Minor scratches can be touched up with matching paint.

Missing Parts? Contact IKEA customer service with article number (194.296.57).

Warranty and Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at IKEA stores.

For assembly help, spare parts, or product support:

Visit: www.ikea.com
Contact your local IKEA store.
Use the IKEA app for interactive assembly instructions.

Recycling: At end of life, disassemble and recycle materials according to local regulations.