IKEA TROTTEN 194.296.43 Cabinet instructions manual

The IKEA TROTTEN 194.296.43 is a versatile cabinet designed for office or home storage, featuring a clean Scandinavian design, adjustable shelves, integrated cable management, and a durable melamine finish. Below are key sections for safety, parts list, assembly, installation, use, care, and troubleshooting.

1. Parts and Hardware 2. Safety Information 3. Assembly Instructions 4. Installation and Mounting 5. Adjustments and Configuration 6. Care and Maintenance 7. Specifications 8. Warranty and Support 9. Troubleshooting

Parts and Hardware

Before assembly, check that you have all parts listed below. The hardware pack is included in the package.

Part NameQuantityDescription/Part Number
Cabinet Side Panel2Left and right melamine panels
Cabinet Top Panel1Main top surface
Cabinet Bottom Panel1Base panel
Back Panel1Fiberboard back
Adjustable Shelf2Interior shelves
Door Panel1Hinged door with handle
Cam Lock Nuts8For panel connections
Screws20Various lengths for assembly
Wall Attachment Device1 setFor securing cabinet to wall
Hinge Set2For door mounting
Door Stopper1Prevents over-opening
Cable Management Clip4For organizing cables

Safety Information

Read all instructions before assembly and use.

  1. Assemble on a clean, flat, protected surface to avoid damage.
  2. Use two people for assembly and lifting to prevent injury.
  3. Always secure the cabinet to the wall using the provided wall attachment device to prevent tipping.
  4. Do not place heavy objects on top that exceed the weight limit.
  5. Keep away from direct heat sources and excessive moisture.

WARNING! Serious or fatal crushing injuries can occur from furniture tipping over. Always secure this furniture to the wall using the provided anti-tip device.

Assembly Instructions

Follow the numbered steps in the included pictorial guide. Use the Allen key provided.

  1. Prepare: Unpack all parts and hardware. Identify each part using the guide.
  2. Connect Side Panels to Bottom: Attach the bottom panel to the two side panels using cam locks and screws.
  3. Attach Top Panel: Secure the top panel to the side panels using the same method.
  4. Install Back Panel: Place the cabinet face down on a soft surface. Nail or screw the back panel into the pre-drilled holes.
  5. Install Shelves: Insert the shelf pins at desired heights. Place the adjustable shelves onto the pins.
  6. Mount Door: Attach hinges to the door panel, then mount the door to the cabinet frame. Adjust for alignment.
  7. Install Door Stopper and Handle: Attach the door stopper inside the cabinet. Screw the handle to the door.
  8. Attach Cable Management Clips: Mount clips inside the cabinet or on the back for cable routing.

Tip: Do not fully tighten cam locks until all parts are aligned. Ensure all connections are secure before use.

Installation and Mounting

To prevent tipping, the cabinet MUST be anchored to the wall.

  1. Decide on final location, ensuring there is space for the door to open fully.
  2. Locate wall studs using a stud finder. Mark their positions.
  3. Position the cabinet against the wall. Use a level to ensure it is straight.
  4. Using the wall attachment bracket and screws provided, secure the cabinet to the wall stud(s).
  5. For concrete walls, use appropriate wall plugs (not included).
  6. Double-check that the cabinet is stable and does not rock.

CAUTION! The wall attachment device is required for safety. Do not skip this step.

Adjustments and Configuration

After assembly, you can make the following adjustments:

Care and Maintenance

To keep your cabinet looking new:

  1. Clean with a soft, damp cloth. Wipe dry immediately.
  2. For stubborn stains, use a mild soap solution. Do not use abrasive cleaners, scouring pads, or solvents.
  3. Do not place hot or wet items directly on the surface.
  4. Periodically check that all screws and wall attachments are tight.

CAUTION! Never use harsh chemicals, as they can damage the melamine finish.

Specifications

Warranty and Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document for full terms.

For assembly help, missing parts, or product support:

Copyright © IKEA. TROTTEN is a trademark of Inter IKEA Systems B.V.

Troubleshooting

SymptomPossible CauseCorrective Action
Cabinet wobblesUneven floor; loose connections; not wall-mountedLevel the cabinet with shims. Tighten all cam locks and screws. Ensure it is securely attached to the wall.
Door does not close properlyMisaligned hinges; warped panelAdjust the hinge screws. Check that the cabinet frame is square.
Shelf sags or is unstableOverloaded; shelf pins not fully seatedDo not exceed 22 lbs per shelf. Ensure shelf pins are firmly inserted into the correct holes.
Missing hardware or partNot included in package; lost during unpackingContact IKEA Customer Service for replacement parts. Provide article number (194.296.43).
Scratches on surface during assemblyAssembled on hard surfaceAlways assemble on a soft, clean blanket or carpet to protect the finish.

Note: If problems persist, disassemble and reassemble following the instructions step-by-step.

IKEA TROTTEN 194.296.43 Cabinet instructions manual © - All Rights Reserved 2025