IKEA TROTTEN 094.295.68 Underframe instructions manual

The IKEA TROTTEN 094.295.68 Underframe is a height-adjustable desk underframe designed for stability and ergonomic flexibility. It supports various tabletop sizes, features electric height adjustment, memory presets, and a robust steel construction. Below are key sections for safety, assembly, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Assembly & Installation 5. Specifications 6. Controls and Operation 7. Height Adjustment 8. Mounting the Tabletop 9. Care & Maintenance 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Steel underframe with electric lift columns, Control Panel with up/down buttons and memory presets, mounting brackets for tabletop, cable management tray, and power supply.

Feature	Description
Electric height adjustment	Smooth motorized adjustment between sitting and standing heights
Memory presets	Store up to 4 favorite height positions
Load capacity	Supports tabletops up to specified weight limit
Cable management	Integrated tray to organize power and device cables
Stability design	Wide footprint and reinforced crossbars for wobble-free use
Control panel	LED display with touch controls for height adjustment
Mounting brackets	Adjustable brackets to fit various tabletop dimensions
Power supply	Included AC adapter for motor operation
Safety features	Anti-collision and overload protection
Finish	Powder-coated steel in black or white

Package Contents

Unpack and verify all parts before assembly.

TROTTEN underframe (main frame with integrated motors)
Control panel with attached cable
Mounting brackets and screws (set of 4)
Cable management tray
Power supply unit with cord
Assembly tool (Allen key)
Instruction manual

WARNING! Check for any shipping damage before assembly. Do not use damaged parts.

Safety Instructions

Read all instructions before assembly and use.

Use on stable, level floor only.
Ensure power cord is not pinched or damaged during assembly.
Keep children away during assembly and adjustment.
Do not exceed maximum load capacity.
Disconnect power before performing any maintenance.
Use only IKEA-approved parts and accessories.

CAUTION! Risk of pinching. Keep hands clear of moving parts during height adjustment.

Assembly & Installation

Step 1: Place underframe upside down on a soft surface.
Step 2: Attach mounting brackets to frame using provided screws.
Step 3: Flip frame upright and position on floor where desk will be used.
Step 4: Connect control panel cable to port on frame.
Step 5: Install cable management tray to underside of frame.
Step 6: Route power cord through cable management.
Step 7: Plug power supply into wall outlet and into frame.

Tip: Two people are recommended for easier handling.

Specifications

Model: TROTTEN 094.295.68
Material: Steel, powder-coated
Height Range: Adjustable from 65 cm to 125 cm (approx.)
Lift Speed: Approximately 38 mm per second
Max Load Capacity: 70 kg (including tabletop and items)
Motor Type: Electric, dual-motor synchronous system
Noise Level: < 50 dB during operation
Power Supply: 100-240V AC, 50/60Hz
Warranty: 10 years limited warranty

Controls and Operation

Control Panel: Up/Down arrows, Memory buttons (M1-M4), LED display showing height.

Basic Operation: Press and hold UP or DOWN to adjust height. Release to stop.

Setting Memory Presets: Adjust to desired height, press and hold M1-M4 for 3 seconds until beep confirms.

Recalling Memory: Briefly press M1-M4 to move to saved height.

Child Lock: Press and hold UP and DOWN simultaneously for 5 seconds to enable/disable.

Height Adjustment

Follow these steps for safe adjustment:

Clear area around desk of obstacles.
Ensure no cables are trapped under feet.
Press UP or DOWN to begin movement.
Stop immediately if unusual noise or resistance occurs.
Adjust in small increments for fine positioning.

WARNING! Do not sit or stand on the desk during adjustment. Keep body parts clear.

Mounting the Tabletop

Compatible with IKEA and many standard tabletops.

Place tabletop upside down on protected surface.
Position assembled underframe centered on tabletop.
Mark screw holes through mounting brackets.
Pre-drill holes if tabletop material requires it.
Secure underframe to tabletop using provided screws.
Flip desk upright carefully with assistance.

Tip: Use appropriate screws for your tabletop material (not included for non-IKEA tops).

Care & Maintenance

Unplug before cleaning. Wipe with damp cloth; avoid abrasive cleaners.

Monthly Check: Tighten mounting screws. Inspect power cord for damage.

CAUTION! Do not use lubricants on moving parts. Contact IKEA for service if needed.

Warranty Information

10-year limited warranty. Covers defects in materials and workmanship. Does not cover damage from improper assembly, misuse, or unauthorized modifications. Proof of purchase required. For warranty claims, contact IKEA customer service with product number and receipt.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Desk does not move	No power	Check power connection; ensure outlet works; check circuit breaker.
Uneven movement	Floor not level	Adjust feet or move to level surface; check for obstructions.
Control panel unresponsive	Loose connection	Check cable connection between panel and frame; reboot by unplugging for 30 seconds.
Memory presets lost	Power interruption	Reset by holding M1 and DOWN for 10 seconds; reprogram presets.
Unusual noise	Obstruction in mechanism	Stop immediately; check for foreign objects; contact IKEA if noise persists.
Desk wobbles	Loose screws or uneven floor	Tighten all mounting and frame screws; adjust leveling feet.

Reset: Unplug power for 1 minute to reset electronic system.

Service: Contact IKEA customer support: 1-888-888-4532 (US) or visit www.ikea.com