IKEA TROTTEN 004.748.38 Cabinet instructions manual

The IKEA TROTTEN 004.748.38 is a versatile cabinet designed for home or office storage, featuring a modern design, adjustable shelves, sturdy construction, and easy assembly. Below are key sections for safety, parts list, assembly instructions, installation, usage, care, and troubleshooting.

1. Parts & Hardware Included 2. Safety Instructions 3. Assembly Steps 4. Installation & Placement 5. Adjusting Shelves 6. Usage Guidelines 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Cabinet panels, shelves, doors, hinges, screws, cam locks, dowels, and assembly tools.

Part DescriptionQuantityIdentification Code
Main cabinet frame (side panels)2A1, A2
Top panel1B1
Bottom panel1B2
Back panel1C1
Adjustable shelves2D1, D2
Door panels2E1, E2
Hinges6F1-F6
Cam locks & dowels10 eachG1, H1
Screws (various sizes)20I1-I3
Assembly tool (Allen key)1J1

Safety Instructions

Read all instructions before assembly. Ensure a safe workspace.

  1. Assemble on a soft surface to avoid scratches.
  2. Use provided tools; do not overtighten screws.
  3. Keep small parts away from children.
  4. Check stability after assembly; secure to wall if included.

WARNING! Cabinet is heavy; lift with care or use two people. Ensure all connections are secure before use.

Assembly Steps

Follow steps in order; refer to included illustration sheet.

  1. Lay side panels (A1, A2) flat; insert dowels into pre-drilled holes.
  2. Attach top (B1) and bottom (B2) panels using cam locks.
  3. Secure back panel (C1) with screws; ensure it is flush.
  4. Install adjustable shelves (D1, D2) by placing on shelf pins.
  5. Attach hinges (F1-F6) to door panels (E1, E2) and then to cabinet frame.
  6. Adjust door alignment using hinge screws for smooth operation.

CAUTION! Do not force parts; ensure correct orientation before tightening.

Installation & Placement

Tip: Use a level during placement to ensure cabinet is upright.

Adjusting Shelves

Shelves are adjustable for custom storage.

  1. Remove items from shelf before adjusting.
  2. Lift shelf slightly and pull forward to release from pins.
  3. Reposition shelf pins at desired height (pre-drilled holes every 2 inches).
  4. Place shelf on pins; ensure it is level and secure.

Note: Do not place heavy items on unsupported shelves.

Usage Guidelines

Designed for general storage; not for hazardous materials.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

  1. Dust regularly with soft, dry cloth.
  2. For stains, use mild soap and water; wipe dry immediately.
  3. Check hinges and screws periodically; tighten if loose.
  4. Do not use wax, polish, or chemicals on surfaces.

CAUTION! Do not soak or spray directly; keep away from heat sources.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Doors not closing properlyHinge misalignmentAdjust hinge screws; ensure doors are level.
Shelves wobblingUneven placement or overloadReposition shelf on pins; reduce weight.
Cabinet unstableFloor uneven or not anchoredPlace on level surface; attach to wall.
Screws not tighteningStripped threads or wrong screwUse correct screw; do not overtighten.
Scratches or damageDuring assembly or useUse touch-up paint (available from IKEA).

Reset: Disassemble and reassemble if major issues occur.

Warranty & Support

10-year limited warranty against manufacturing defects. Warranty does not cover damage from misuse, improper assembly, or accidents. For support, visit www.ikea.com or contact your local IKEA store. Keep receipt for warranty claims.

Service: IKEA customer service: 1-888-888-4532

IKEA TROTTEN 004.748.38 Cabinet instructions manual © - All Rights Reserved 2025