IKEA TROSS 802.626.63 Ceiling Lights Instructions Manual

The IKEA TROSS 802.626.63 is a modern ceiling light fixture designed for general room illumination. It features a minimalist design, energy-efficient LED light source, dimmable functionality (with compatible dimmers), and a white finish. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Light 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED light module, ceiling mount plate, mounting screws, wire connectors, and user manual.

Feature	Description
LED Light Source	Energy-efficient, long-lasting integrated LEDs
Dimmable	Compatible with leading-edge or trailing-edge dimmers (check compatibility)
Design	Minimalist, white finish for versatile decor matching
Mounting Plate	For secure attachment to ceiling junction box
Wire Connectors	For safe electrical connection
Installation Level	Basic; requires understanding of electrical wiring

Installation

Unpack and inspect all parts. Ensure power is OFF at the circuit breaker.

Turn off power: Switch off electricity at the main fuse box/circuit breaker.
Mount the plate: Attach the mounting plate to the ceiling junction box using provided screws.
Connect wires: Match fixture wires (Live/Brown, Neutral/Blue, Earth/Yellow-Green) to house wires using wire connectors. Secure connections.
Attach the light: Align the fixture with the mounting plate and secure it according to instructions (usually by twisting or screwing).
Install light bulbs: If applicable (some models have integrated LEDs).

WARNING! Installation should be performed by a qualified electrician if you are unsure. Ensure the ceiling can support the fixture's weight.

First-Time Setup

After installation, restore power and test the light.

Restore power: Turn electricity back on at the circuit breaker.
Test operation: Use the wall switch to turn the light on/off.
Test dimmer (if installed): Slowly adjust the dimmer to ensure smooth operation without flickering.
Adjust angle (if adjustable): Some models allow directing light; adjust as needed.

CAUTION! Do not touch the LED module directly with bare hands during installation to avoid damage.

Specifications

Model: TROSS 802.626.63
Light Source: Integrated LED
Power Consumption: [e.g., 15W] (Check product label)
Luminous Flux: [e.g., 1500 lumens] (Check product label)
Color Temperature: [e.g., 2700K Warm White] (Check product label)
Dimmable: Yes, with compatible dimmer
Voltage: 120V AC, 60Hz (for North America)
IP Rating: Not for damp/wet locations (indoor use only)
Dimensions: Refer to product packaging

Controls and Settings

Primary control is via the wall switch. If using a dimmer, adjust light level.

Wall Switch: ON/OFF control.

Dimmer Switch (if installed): Rotate or slide to adjust brightness. Ensure dimmer is compatible with LED loads.

No remote control or built-in settings menu included.

Connecting to Power

Connection to household electrical wiring is required.

Ensure power is OFF at the breaker.
Identify wires: House wires (Black/Hot, White/Neutral, Green or Bare/Ground). Fixture wires (Brown/Live, Blue/Neutral, Yellow-Green/Earth).
Connect: Use wire connectors to join Hot to Live (Brown), Neutral to Neutral (White to Blue), Ground to Ground (Green to Yellow-Green).
Secure all connections and tuck wires neatly into the junction box.

Tip: Use a voltage tester to confirm power is off before touching wires.

Using the Light

Operate using the wall switch. For dimming, use a compatible dimmer switch.

Turning On/Off: Use the wall switch.
Dimming: Adjust the dimmer switch gradually. Avoid setting to the very lowest level if flickering occurs.
No other operational modes (color change, etc.) are available.

WARNING! Do not use with incompatible dimmers as this may cause damage or flickering.

Accessibility Features

This product is a basic lighting fixture with no specific digital accessibility features. Ensure the wall switch is placed at an accessible height as per local building codes.

Care & Cleaning

Turn off power and allow the light to cool before cleaning.

Use a dry, soft cloth to wipe the surface.
For stubborn marks, use a slightly damp cloth. Do not use abrasive cleaners or chemicals.
Do not immerse the fixture in water or any liquid.

CAUTION! Never spray cleaning agents directly onto the light. Ensure the fixture is completely dry before restoring power.

Regulatory Information

This product complies with relevant safety standards (e.g., UL/cUL in North America). The LED light source is not replaceable; the entire fixture must be replaced at end of life. Dispose of according to local regulations for electronic waste. For more information, visit www.ikea.com or contact IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power off / Loose connection	Check circuit breaker. Ensure wall switch is on. Check all wire connections are secure.
Light flickers	Incompatible dimmer / Loose bulb	Ensure dimmer is LED-compatible. Tighten connections. If non-dimmable, remove dimmer.
Dimming not smooth	Dimmer compatibility / Load issue	Use a dimmer specifically rated for the wattage of this LED fixture.
Buzzing sound	Dimmer or transformer issue	Incompatible dimmer. Try a different LED-compatible dimmer model.
Light is dim	Dimmer setting / End of life	Adjust dimmer to full brightness. If problem persists, the LED module may be failing.

Service: For product issues, contact IKEA customer support or return to your local IKEA store. Do not attempt to repair the integrated LED module.